Shell Holders & Shell Plates

Hornady Shell Holder #24, 7.65 Belgian

Precision machined from solid steel and heat-treated to perform flawlessly. Wide mouth and rounded edge at the opening allow smoother case insertion. Hornady steel shell holders also fit most other brands of reloading presses. Caliber: 7.65 Belgian

Hornady Shell Holder #52, (338 Marlin Express)

Precision machined from solid steel then heat treated to perform flawlessly for the life of the press. They fit all other Hornady accessories including the Hornady Cam-Lock Case Trimmer and Hand-Held Priming Tool. These shellholders will also fit the...

Hornady Shell Holder #25

10.3x60R Swiss/348 Winchester/500 Linebaugh/50 Alaskan

Lee BL Pro Shell Plate #19

Lee Load-Master progressive 5-hole reloading kit for 44 Special/44 Magnum. Includes dies (Full Length Size, Powder Through Expanding and Bullet Seating Dies), Turret, #11L Shell Plate, Pro Auto-Disk Powder Measure, Universal Case Feeder and Large...

MTM Case-Gard Ammo Box 50 Round Flip-Top 38 - 357, Clear-Blue

These flip top boxes are available in five sizes to accommodate any type of handgun ammo. They have an easy to grip, scuff-resistant textured surface and are stackable. The Snap-Lok latch and full length mechanical hinge are guaranteed for 25 years.ibers...

Hornady Shell Holder #34, 6.5 Japanese

Precision machined from solid steel and heat-treated to perform flawlessly. Wide mouth and rounded edge at the opening allow smoother case insertion. Caliber: 6.5 Japanese

Hornady Shell Holder #17, .224 Weatherby Magnum

Precision machined from solid steel and heat-treated to perform flawlessly. Wide mouth and rounded edge at the opening allow smoother case insertion. Caliber: 224 Weatherby Magnum

Hornady Shell Holder #54, 450 Nitro Express

Precision machined from solid steel then heat treated to perform flawlessly for the life of the press. They fit all other Hornady accessories including the Hornady Cam-Lock Case Trimmer and Hand-Held Priming Tool. These shellholders will also fit the...

Hornady Shellholder #15, (.376 Steyr)

Precision machined from solid steel then heat treated to perform flawlessly for the life of the press. They fit all other Hornady accessories including the Hornady Cam-Lock Case Trimmer and Hand-Held Priming Tool. These shellholders will also fit the...

Hornady Sure-Loc Lock Rings 6 Pk

Allows you to make precise adjustments of all standard 7/8"-14 dies and accessories. Clamps around the whole die and won’t damage the threads. Applies constant pressure across the threads to hold the ring in place. Wrench Flats: Remove and...

Hornady Shellholder Kit of #1, #2, #5, #16, #35

Made from precision machined solid steel then heat treated to perform flawlessly for the life of the press. This set of the 5 most popular Hornady Shellholders will fit over 75 popular cartridges. Technical Information: Set Includes: Shellholder...

RCBS Shell Holder #18

RCBS Single Stage shell holders are built from hardened steel and designed to properly align the case with the reloading die in single-stage and turret presses. They’re sized to fit specific case heads and capture 0.125 inch of the case head...

RCBS Shell Holder #43

RCBS Single Stage shell holders are built from hardened steel and designed to properly align the case with the reloading die in single-stage and turret presses. They’re sized to fit specific case heads and capture 0.125 inch of the case head...

RCBS Shell Holder #27

RCBS Single Stage shell holders are built from hardened steel and designed to properly align the case with the reloading die in single-stage and turret presses. They’re sized to fit specific case heads and capture 0.125 inch of the case...

RCBS Shell Holder #14

RCBS Single Stage shell holders are built from hardened steel and designed to properly align the case with the reloading die in single-stage and turret presses. They’re sized to fit specific case heads and capture 0.125 inch of the case head...

RCBS Shell Holder #2

If your shell holder doesn't securely grip the sell and firmly fit into the press during reloading, you're bound to have headspace and sizing problems. RCBS manufactures their shell holders to the industry's tightest tolerances, using only the finest...

Hornady Shell Holder #48, (.338 Lapua)

Precision machined from solid steel then heat treated to perform flawlessly for the life of the press. They fit all other Hornady accessories including the Hornady Cam-Lock Case Trimmer and Hand-Held Priming Tool. These shellholders will also fit the...

Hornady Shellholder #11, (30-40 Krag, 303 British)

Precision machined from solid steel then heat treated to perform flawlessly for the life of the press. They fit all other Hornady accessories including the Hornady Cam-Lock Case Trimmer and Hand-Held Priming Tool. These shellholders will also fit the...

Hornady Shell Holder #41

Shell Holder #41 Precision machined from solid steel then heat treated to perform flawlessly for the life of the press. They fit all other Hornady accessories including the Hornady Cam-Lock Case Trimmer and Hand-Held Priming Tool. These shellholders will...

Hornady Shellholder #36, (32 H&R Magnum, 32 S&W Long)

Precision machined from solid steel then heat treated to perform flawlessly for the life of the press. They fit all other Hornady accessories including the Hornady Cam-Lock Case Trimmer and Hand-Held Priming Tool. These shellholders will also fit the...

Hornady Shellholder #35, (223 WSSM, 243 WSSM, 300 WSM)

Precision machined from solid steel then heat treated to perform flawlessly for the life of the press. They fit all other Hornady accessories including the Hornady Cam-Lock Case Trimmer and Hand-Held Priming Tool. These shellholders will also fit the...

Hornady Shellholder #1, (308 Win, 30-06 Springfield, 45 ACP)

Precision machined from solid steel then heat treated to perform flawlessly for the life of the press. They fit all other Hornady accessories including the Hornady Cam-Lock Case Trimmer and Hand-Held Priming Tool. These shellholders will also fit the...

Hornady Shell Plate #2

The Hornady Shell Plate, Number 2, Steel, 392602 Quantity: 1, Weight: 150 g, Caliber: .219 Zipper, .22 Savage Hi-Power, .25-35 Winchester, .30 Herrett, .30-30 Winchester, .32 Winchester Special, .32-40 Winchester, .375 Winchester, .38-55 Winchester, 5...

Lee 6.5 PRC Case Gauge & Shell Holder

6.5 PRC case length gauge and shell holder. Use with the cutter and lock stud. Trim to length 2.010 to 2.030 inches.

Hornady #51 Shellholder (455 Webley)

Precision machined from solid steel and heat-treated to perform flawlessly. Wide mouth and rounded edge at the opening allow smoother case insertion. Fits: #51: 455 Webley

Hornady #41 Shell Holder

Shell Holder #41

RCBS Shell Holder #25

RCBS ensures a secure, firm grip on your cases. Using the very finest steel available, they create these shell holders to prevent you from running into headspace and sizing problems.Fits:8mm Nambu

Hornady Lock-N-Load Comparator Set with 14 Inserts

The Hornady Lock-N-Load Bullet Comparator is perfect for the loader looking to measure the seating depth of loaded ammunition quickly and accurately. Measurement from the ogive to the base of the loaded round, to eliminate variations in seat depth...

Hornady #46 Shell Holder for .460 S&W

Precision machined from solid steel and heat-treated to perform flawlessly. Wide mouth and rounded edge at the opening allow smoother case insertion.   Caliber: .460 S&W

Hornady #17 Shell Holder for 224 Weatherby Magnum

Precision machined from solid steel and heat-treated to perform flawlessly. Wide mouth and rounded edge at the opening allow smoother case insertion.   Caliber: 224 Weatherby Magnum

Hornady #12 Shell Holder for .25 Remington

Precision machined from solid steel and heat-treated to perform flawlessly. Wide mouth and rounded edge at the opening allow smoother case insertion.   Caliber: .25 Remington, .30 Remington, 6.8mm Remington SPC

RCBS 09234 Shell Holder #34

RCBS Single Stage shell holders are built from hardened steel and designed to properly align the case with the reloading die in single-stage and turret presses. They’re sized to fit specific case heads and capture 0.125 inch of the case head for...

RCBS 09233 Shell Holder #33

RCBS Single Stage shell holders are built from hardened steel and designed to properly align the case with the reloading die in single-stage and turret presses. They’re sized to fit specific case heads and capture 0.125 inch of the case head for...

RCBS 09230 Shell Holder #30

RCBS Single Stage shell holders are built from hardened steel and designed to properly align the case with the reloading die in single-stage and turret presses. They’re sized to fit specific case heads and capture 0.125 inch of the case head for...

RCBS 09228 Shell Holder #28

RCBS Single Stage shell holders are built from hardened steel and designed to properly align the case with the reloading die in single-stage and turret presses. They’re sized to fit specific case heads and capture 0.125 inch of the case head for...

RCBS 09226 Shell Holder #26

RCBS Single Stage shell holders are built from hardened steel and designed to properly align the case with the reloading die in single-stage and turret presses. They’re sized to fit specific case heads and capture 0.125 inch of the case head for...

RCBS 09224 Shell Holder #24

RCBS Single Stage shell holders are built from hardened steel and designed to properly align the case with the reloading die in single-stage and turret presses. They’re sized to fit specific case heads and capture 0.125 inch of the case head for...

RCBS 09208 Shell Holder #8

RCBS Single Stage shell holders are built from hardened steel and designed to properly align the case with the reloading die in single-stage and turret presses. They’re sized to fit specific case heads and capture 0.125 inch of the case head for...

Hornady Lock-N-Load AP Shell Plate #35

Our shell plates feature a subtle radius on each shell holder mouth to ensure smooth and reliable functioning. The retainer spring is designed to stay in place when inserting cases into the shell plate. #35

Hornady Lock-N-Load AP Shell Plate #32 (.45 Colt, 454 Casull & Others)

Hornady shell plates feature a subtle radius on each shell holder mouth to ensure smooth and reliable functioning. The retainer spring is designed to stay in place when inserting cases into the shell plate. #32 fits: .45 Colt, 454 Casull &...

Hornady LNL AP Shell Plate #9

The subtle radius of each shell holder mouth ensures smooth and reliable functioning. The retainer spring is designed to stay in place when inserting cases into the shell plate. Shell plates for Lock-N-Load AP and Pro-Jector are available to fit...

Hornady #26 Shell Holder for 35 Remington

Precision machined from solid steel and heat-treated to perform flawlessly. Wide mouth and rounded edge at the opening allow smoother case insertion. Hornady steel shell holders also fit most other brands of reloading presses.

Hornady Shell Holder #7 (.218 Bee, .25-20 Win)

Specifications and Features:Snaps easily into single stage reloading pressHolds cartridge in perfect alignmentNo need to change rams or tighten set screwsMachined from solid steelFits Hornady and most other pressesFits:.218 Bee.25-20 Winchester.32-20...

Hornady #4 Shellholder for 220 Swift

Specifications and Features:Snaps easily into single stage reloading pressHolds cartridge in perfect alignmentNo need to change rams or tighten set screwsMachined from solid steelFits Hornady and most other pressesFits: 220 Swift 225 Winchester 6.5...

Hornady #3 Shellholder for .22 Hornet

Specifications and Features:Snaps easily into single stage reloading pressHolds cartridge in perfect alignmentNo need to change rams or tighten set screwsMachined from solid steelFits Hornady and most other pressesFits:.22 Hornet.22 K-Hornet.270 REN

Hornady Lock-N-Load Die Bushing, 2 Pk

The Lock-N-Load Reloading System is a unique bushing process that allows dies to be changed with a flick of the wrist. Simply insert the die into a Lock-N-Load bushing. Place the bushing in the press and lock it into place with a twist. The six lugs on...

Hornady Shellholder #44 (500 S&W Magnum)

Precision machined from solid steel then heat treated to perform flawlessly for the life of the press. They fit all other Hornady accessories including the Hornady Cam-Lock Case Trimmer and Hand-Held Priming Tool. These shellholders will also fit the...

Lee Precision 260 Rem Case Gauge & Shell Holder

Lee 260 REM Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim.   Trim to length 2.015 to 2.035 inches.

Lee Precision 454 Casull Case Length Gauge & Shell Holder

Lee 454 CASULL Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim.

Lee Precision 35 Whelen Case Gauge & Shell Holder

Lee 35 WHELEN Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim.   Trim to length 2.474 to 2.494 inches.

Lee Precision 458 Win Mag Case Gauge & Shell Holder

Lee 458 WIN MA Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim Trim to length 2.480 to 2.500 inches.

Lee Precision 38-55 Win Case Length Gauge & Shell Holder

Lee 38-55 Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim Trim to length 2.065 to 2.085 inches