Scope Mounts & Rings

Trijicon RCR #6-32 Medium Capstan Screw Pack

The RCR #6-32 Medium Capstan Screw Pack Contains 4x .345″ Capstan Screws for the RCR.

Aimpoint ACRO Mount 17mm Fixed

The Acro Mount 17 mm is a fixed, ultra‑low‑profile mounting solution intended for platforms that require a minimal optic height. Its 17 mm optical axis height places the sight close to the bore, supporting a low‑mount configuration on rifles and carbines...

Leupold Rifleman Gen 2 Rings, 1", 3/8" Dovetail Rimfire See-Thru

Rugged and reliable Rifleman Gen 2 scope rings are machined to precise specifications from lightweight, aircraft-grade aluminum for maximum strength and repeatable alignment. T-15 Torx® screws provide easy, secure installation.Designed for 1-inch...

Leupold Rifleman Gen 2 Rings, 1", 3/8" Dovetail Rimfire

Rugged and reliable Rifleman Gen 2 scope rings are machined to precise specifications from lightweight, aircraft-grade aluminum for maximum strength and repeatable alignment. T-15 Torx® screws provide easy, secure installation.Designed for 1-inch...

Leupold Rifleman Gen 2 Rings, 1", See-Thru High

Rugged and reliable Rifleman Gen 2 scope rings are machined to precise specifications from lightweight, aircraft-grade aluminum for maximum strength and repeatable alignment. T-15 Torx® screws provide easy, secure installation.Designed for 1-inch...

Leupold Rifleman Gen 2 Rings, 1", High

Rugged and reliable Rifleman Gen 2 scope rings are machined to precise specifications from lightweight, aircraft-grade aluminum for maximum strength and repeatable alignment. T-15 Torx® screws provide easy, secure installation.Designed for 1-inch...

Leupold Rifleman Gen 2 Rings, 30mm, High

Rugged and reliable Rifleman Gen 2 scope rings are machined to precise specifications from lightweight, aircraft-grade aluminum for maximum strength and repeatable alignment. T-15 Torx® screws provide easy, secure installation.Designed for 1-inch...

Leupold Rifleman Gen 2, 1-pc Base, Savage 110/Axis, Adaptable

Rugged and reliable Machined to precise specifications from lightweight, aircraft-grade aluminum Designed for Savage 110 and Axis rifles Delivers exceptional value, strength, and performance Includes both 6-48 and 8-40 mounting screws Rugged and...

Leupold Rifleman Gen 2, 1-pc Base, Ruger 10/22

Rugged and reliable Rifleman Gen 2 scope bases are machined to precise specifications from lightweight, aircraft-grade aluminum for maximum strength and repeatable alignment. Guaranteed for life, Rifleman Gen 2 bases deliver exceptional value, strength,...

Leupold Rifleman Gen 2, 1-pc Base, Marlin 336

Rugged and reliable Rifleman Gen 2 scope bases are machined to precise specifications from lightweight, aircraft-grade aluminum for maximum strength and repeatable alignment. Guaranteed for life, Rifleman Gen 2 bases deliver exceptional value, strength,...

Leupold Rifleman Gen 2, 2-pc Base, Winchester 70

Rugged and reliable Rifleman Gen 2 Scope Bases are machined from lightweight, aircraft-grade aluminum for maximum strength and repeatable alignment. Designed for Winchester Model 70 rifles, this 2-piece base provides a secure, precise mounting solution...

Leupold Rifleman Gen 2, 2-pc Base, Remington 700, Adaptable

Rugged and reliable Rifleman Gen 2 scope bases are machined to precise specifications from lightweight, aircraft-grade aluminum for maximum strength and repeatable alignment. T-15 Torx® screws provide easy, secure installation.Designed for Remington...

Leupold Backcountry Cross-Slot Remington 700, LA, 20 MOA, Adaptable

Leupold BackCountry cross-slot bases are made of 7075-T6 aluminum, making them some of our lightest and most rugged mounts yet. This adaptable BackCountry cross-slot base comes with two sets of screws [8-40 and 6-48] and is designed to fit a Remington...

SPUHR M5X35 TX20 CLAMPING SCREWS (5-PACK)

M5x35 Torx 20 screws for the side clamp (5 pcs) on SP-***1/SP-***1C mounts and SR-*000 rings. The 10.9 Grade steel screws are zinc-nickel treated (for corrosion protection) and are pre-coated with Gleitmo 627 dry lubricant film to ensure proper torque...

Talley Picatinny Base For Ruger American, Long Action

Made in America, Talley Manufacturing’s Ruger American Picatinny Rails are machined entirely from high grade 7000 series alloy and protected with a hard-coat anodizing to 65 Rockwell ensuring the craftsmanship of these Picatinny rails last the...

Leupold Backcountry Cross-Slot Remington 700, SA, 20 MOA, Adaptable

Leupold BackCountry cross-slot bases are made of 7075-T6 aluminum, making them some of our lightest and most rugged mounts yet. This adaptable BackCountry cross-slot base comes with two sets of screws [8-40 and 6-48] and is designed to fit a Remington...

Leupold Backcountry Cross-Slot Browning X-Bolt 2, LA, 20 MOA

“Every model in the BackCountry series is constructed with 7075-T6 aluminum, making them some of our lightest and most rugged hunting-style mounts yet. They’re available in a ringmount and a cross-slot design, and the cross-slot bases accept...

Weaver Grand Slam Standard Dovetail Extension Rings, 1", High

Grand Slam rings are constructed of solid steel which yields amazing strength and scope retention. Scope returns to zero upon reinstallation

Tikka/Sako Optilock Rings, 30mm, Medium

OPTILOCK scope mount rings and bases are precisely machined out of solid steel to ensure perfect mating with the integral receiver scope mount rails and optimal scope alignment.  OPTILOCK scope mount rings fit both Sako and Tikka rifles and come...

Tikka/Sako Optilock Rings, 30mm, Extra Low

OPTILOCK scope mount rings and bases are precisely machined out of solid steel to ensure perfect mating with the integral receiver scope mount rails and optimal scope alignment.  OPTILOCK scope mount rings fit both Sako and Tikka rifles and come...

CZ 457 Weaver/Picatinny Scope Rail

Original CZ scope base / picatinny rail for CZ 457 models.  This picatinny rail is made by CZ, from aluminium.   made of aluminium excellent quality original CZ product made in Czech republic factory new screws included

Traditions 1" Medium Rings and Rail Package, Nickel

Traditions 1" Medium Rings and Persuit & Yukon Rail

Traditions 1" Medium Rings, Camo

The Traditions Scope Rings are designed to securely mount a scope on a rifle with a 1" tube diameter. Specifically designed for Weaver bases, these scope rings are durable and reliable, providing stability and precision for your hunting or shooting...

Talley 1" Tikka T1X Rings, High

Made in America, these Tikka T1 Scope Mounts made by Talley Manufacturing offer a unique and simplified one-piece scope ring and base solution for Tikka T1 and T1X rifles. This simplified mounting system eliminates the possibility of an “out of...

Leupold Backcountry Savage 10/110 Round Receiver Rings, 1", High, Adaptable

These adaptable BackCountry two-piece ringmounts include both 8-40 and 6-48 screws, attach directly to Savage 10/110 round receivers, and accept any riflescope with a 1” maintube. Constructed from 7075-T6 aluminum, they are among our lightest...

Leupold Backcountry Cross-Slot Savage 110/Axis Round Receiver, LA, 20 MOA, Adaptable

Leupold® BackCountry cross-slot bases are made of 7075-T6 aluminum, making them some of our lightest and most rugged mounts yet. This adaptable BackCountry cross-slot base comes with two sets of screws [8-40 and 6-48] and is designed to fit a Savage...

Leupold Backcountry Cross-Slot Savage 110/Axis Round Receiver, LA, Adaptable

Leupold BackCountry cross-slot bases are made of 7075-T6 aluminum, making them some of our lightest and most rugged mounts yet. This adaptable BackCountry cross-slot base comes with two sets of screws [8-40 and 6-48] and is designed to fit a Savage...

Leupold Backcountry Cross-Slot Savage 110 Round Receiver, SA, 20 MOA, Adaptable

Leupold® BackCountry cross-slot bases are made of 7075-T6 aluminum, making them some of our lightest and most rugged mounts yet. This adaptable BackCountry cross-slot base comes with two sets of screws [8-40 and 6-48] and is designed to fit a...

Leupold Backcountry Cross-Slot Savage 110 Round Receiver, SA, Adaptable

Leupold® BackCountry cross-slot bases are made of 7075-T6 aluminum, making them some of our lightest and most rugged mounts yet. This adaptable BackCountry cross-slot base comes with two sets of screws [8-40 and 6-48] and is designed to fit a...

Leupold Backcountry Cross-Slot Remington 700 Rail, LA, Adaptable

Leupold BackCountry cross-slot bases are made of 7075-T6 aluminum, making them some of our lightest and most rugged mounts yet. This adaptable BackCountry cross-slot base comes with two sets of screws [8-40 and 6-48] and is designed to fit a Remington...

Leupold Backcountry Cross-Slot Remington 700 Rail, SA, Adaptable

Leupold® BackCountry cross-slot bases are made of 7075-T6 aluminum, making them some of our lightest and most rugged mounts yet. This adaptable BackCountry cross-slot base comes with two sets of screws [8-40 and...

Leupold Backcountry Cross-Slot CVA Cascade Rail, LA, 20 MOA

Leupold BackCountry cross-slot bases are made of 7075-T6 aluminum, making them some of our lightest and most rugged mounts yet. This BackCountry cross-slot base is designed to fit a CVA Cascade Long Action and accepts both...

Leupold Backcountry Cross-Slot CVA Cascade Rail, SA, 20 MOA

Leupold BackCountry cross-slot bases are made of 7075-T6 aluminum, making them some of our lightest and most rugged mounts yet. This BackCountry cross-slot base is designed to fit a CVA Cascade Short Action and accepts both...

Leupold Backcountry Cross-Slot Browning X-Bolt 2 Rail, LA

Leupold BackCountry cross-slot bases are made of 7075-T6 aluminum, making them some of our lightest and most rugged mounts yet. This BackCountry cross-slot base is designed to fit a Browning X-Bolt 2 Long Action and accepts both...

Leupold Backcountry Cross-Slot Browning X-Bolt Rail, SSA, 20 MOA

Leupold BackCountry cross-slot bases are made of 7075-T6 aluminum, making them some of our lightest and most rugged mounts yet. This BackCountry cross-slot base is designed to fit a Browning X-Bolt Super Short Action and accepts both...

Leupold Backcountry Cross-Slot Browning X-Bolt Rail, SA, 20 MOA

Leupold BackCountry cross-slot bases are made of 7075-T6 aluminum, making them some of our lightest and most rugged mounts yet. This BackCountry cross-slot base is designed to fit a Browning X-Bolt Short Action and accepts both Picatinny- and...

Leupold Backcountry Cross-Slot Browning X-Bolt 1 Rail, LA, 20 MOA

Leupold BackCountry cross-slot bases are made of 7075-T6 aluminum, making them some of our lightest and most rugged mounts yet. This BackCountry cross-slot base is designed to fit a Browning X-Bolt Long Action and accepts both Picatinny- and...

Leupold Backcountry Cross-Slot Barret Fieldcraft Rail, LA, 20 MOA

Leupold BackCountry cross-slot bases are made of 7075-T6 aluminum, making them some of our lightest and most rugged mounts yet. This BackCountry cross-slot base is designed to fit a Barret Fieldcraft Long Action and accepts both Picatinny- and...

Tikka/Sako Optilock Rings, 1", Extra Low

OPTILOCK scope mount rings and bases are precisely machined out of solid steel to ensure perfect mating with the integral receiver scope mount rails and optimal scope alignment.  OPTILOCK scope mount rings fit both Sako and Tikka rifles and come...

Tikka T1X Picatinny Rail, 0 MOA

Designed to fit Tikka MTR and Tikka UPR Rifles, are machined entirely from high grade 7000 series alloy and protected with a hard-coat anodizing to 65 Rockwell ensuring the craftsmanship of these Picatinny rails last the lifetime of your firearm. These...

Leupold Backcountry Cross-Slot Browning AB3 Rail, LA

Leupold® BackCountry cross-slot bases are made of 7075-T6 aluminum, making them some of our lightest and most rugged mounts yet. This BackCountry cross-slot base is designed to fit a Browning AB3 Long Action and accepts both Picatinny- and...

SPUHR DOCTER/VENOM INTERFACE

Interface for attaching Docter/Noblex and Burris FastFire (1 through 4) sights to the ISMS-series scope mount. Includes screws. The A-0011 footprint also matches the following, though screw head sizing may vary: • Docter/Noblex Sight C / Sight 2+ /...

SPUHR Hunting Mount Ø30 H30MM/1.18” 0MIL TRG

Our new Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts.The SCT-3001 is designed for the Tikka T3X, but will also fit on the SAKO TRG 22/42, and features one classic ring and one...

Vortex Razor Red Dot Handgun Mount, Smith & Wesson M&P

Slide mount for Razor red dot replaces the Picatinny rail mount included with the Razor red dot. Allows installation on Smith & Wesson M&P handguns. Will not work with Viper or Venom Red Dots.

Vortex Razor Red Dot, Weaver Mount

Low Weaver rail mount for the Razor red dot. Replaces Picatinny rail mount included with the Razor red dot. Allows installation on Weaver base. Will not work with Viper or Venom Red Dots.

Talley 30mm High Rimfire Rings for CZ 452 European, 455, 457, 512 513

Talley 30CZRH 30mm Rimfire Rings for CZ 452 European, 455, 457, 512, 513; Steyr Zephyr II; Marlin 60 , 11mm dovetail , Low

SPUHR ISMS RINGS, Ø30 H25.4MM/1” PIC

The Spuhr SR-3000 are precision-engineered scope rings designed for secure attachment of 30mm diameter riflescopes. The two-piece design allows for flexibility in positioning on Picatinny or Weaver rails. These Spuhr SR-3000 rings feature a height of 1...

AIMPOINT LENS COVER, FLIP-UP, FRONT TRANSPARENT

This is a transparent lens cover made of durable rubber with snap closure and flip-up function. The cover is easy to flip up and stays in the up position until it is quickly and easily folded down manually and closes tightly with a small snap. The...

Vortex Sport Cantilever Mount 30mm - 1.5"

The 2" offset gets your head position and eye relief dialed, while leaving plenty of real estate on your rail. Lightweight, but with the power to stand up to recoil and the rigors of range day, these mounts get you shooting faster and easier, with...

S&J Sierra RD Optics Plate, Acro Mount, Beretta 1301

The Sierra RD Optic plate is available for the following shotgun manufacturers: Beretta - 1301 tactical (will not fit the 1301 comp) The Sierra RD Optics Plate is available in the following configurations: Acro Mount - Aimpoint Acro P1/P2/...

S&J Sierra RD Optics Plate, RMR Mount, Mossberg

The Sierra RD Optic plate is available for the following shotgun manufacturers: Mossberg - 500, 590, 930 The Sierra RD Optics Plate is available in the following configurations: RMR Mount - Trijicon RMR/ Holosun...

S&J Sierra RD Optics Plate, RMR Mount, Beretta 1301

The Sierra RD Optic plate is available for the following shotgun manufacturers: Beretta - 1301 tactical (will not fit the 1301 comp) The Sierra RD Optics Plate is available in the following configurations: RMR Mount - Trijicon RMR/ Holosun...