Molds, Dies & Lead Pots

Hornady One Shot Case Sizing Wax

Simply dab on your index finger & thumb, then apply to cartridge case before sizing. A little goes a long way. Features Wax based lube Superior high pressure lubricant Built in tarnish inhibitors Wipes off easily Leaves no sticky residue Far...

Hornady One Shot Case Sizing Wax

Simply dab on your index finger & thumb, then apply to cartridge case before sizing. A little goes a long way. Features Wax based lube Superior high pressure lubricant Built in tarnish inhibitors Wipes off easily Leaves no sticky residue Far...

Lee 45 Cal 250 Gr Double Cavity Mold

Lee Precision Double Cavity R.E.A.L. (Rifling Engraved At Loading) Bullet Mold produces two .45 Caliber, 250 grain bullets for Muzzleloaders. Because of the unique cleaning action, this solid bullet loads easily even after many...

Lee 452-230 TC 6 Cavity Bullet Mold

Lee 6 cavity block produces a .452 diameter 230 grain Truncated Cone nose bullet suitable for cartridges like 45ACP, 45 Colt, etc. Bullet Mold lube and handles sold separately.

Lyman Digital Lead Thermometer

The Lyman Digital Thermometer is a fast and accurate way to check the temperature of your casting alloy. The long 6” probe will work with the largest casting furnaces and keeps your hand away from molten lead. The large, easy to read display can be...

Lee 6.5 Creedmoor 2 Die Set

Lee 6.5 Creedmoor. Includes full length sizer die and easy adjust dead length bullet seating die.

Lee Precision .501 DIA 440gr RF Double Cavity Mold

Lee Double Cavity Mold produces a .501 diameter 440 grain round nose bullet suitable for a cartridge like 500 S&W. Handles included.

Lee Precision .690 Dia Single Cavity Round Ball Mold

 Lee Single Cavity Mold produces a .690 diameter Ball, 493.14 grains. Includes handles.

Lee Bullet Mold 00 Buck Shot Mold No Handles

This precision molded mold produces 18 linked pellets per cast. No need to individually count pellets simply snip three strands into your 12 gauge shell. Each cast produces enough pellets to load two 12 Gauge shotshells.Wooden handles shown are NOT...

Lee Bullet Mold 54 Cal 410 Gr Improved Minie

Lee Single Cavity Mold produces a .533 diameter 410 grain Minie bullet.

Lee 2-Cavity Bullet Mold (.225 Diameter) 55Gr RF

Lee Double Cavity Mold produces a gas checked .225 diameter 55 grain round with flat bullet suitable for .22 cal cartridges. Handles included.

Lee 2-Cavity Bullet Mold (.358 Diameter) 200GR RF

Lee Double Cavity Mold produces a gas checked .358 diameter 200 grain round with flat bullet suitable for cartridges like 35 Remington, etc. Handles included.

Lee 2-Cavity Bullet Mold (.490 Diameter) Round Ball

Lee Precision Ball Molds are a great choice for reloaders looking for a quality mold at an affordable price. This .490" diameter round, double cavity mold is suited to fast production. The mold halves are clamped together and then lathe-bored for...

Lee 2-Cavity Bullet Mold (.457 Diameter) Round Ball

Lee Precision Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds...

Lee 2-Cavity Bullet Mold 54 Caliber 300 Grain Bullet

Lee Precision Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds...

Lee 2-Cavity Bullet Mold (.457 Diameter) 405 Gr RFN

Lee Precision Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds...

Lee 2-Cavity Bullet Mold (.457 Diameter) 340 Gr FN

Lee Precision Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds...

Lee 2-Cavity Bullet Mold (309 Diameter) 180 Gr RN

Lee Precision Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds...

Lee 2-Cavity Bullet Mold .309Dia 160Gr R Bullet Mold

Lee Precision Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel...

Lee 2-Cavity Bullet Mold .285 Dia 130 Gr R

Lee 2-Cavity Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds...

Lee 2-Cavity Bullet Mold .452 228gr RN Bullet Mold

Lee Precision Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds...

Lee 2-Cavity Bullet Mold (379 Diameter) 250 Grain RF

Lee Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and...

Lee .429 Dia 200GR RF Double Cavity Mold

Lee Double Cavity Mold produces a .429 diameter 200 grain round with flat bullet suitable for cartridges like 44 Spec, 44/40, etc.

Lee .530 Dia Double Cavity Round Ball Mold

Lee Double Cavity Mold produces a .530 Ball, 223.49 grains. Includes handles.

Lee Shotgun Slug Mold 12 Gauge 7/8 oz.

Lee 7/8oz Slug Mold features the exclusive drive key which positively rotates the slug in rifled shotgun barrels. Includes sprue plate, handles and instruction with suggested loadsSpecifications and features: 7/8 oz slug mold Speeds casting Aluminum...

Lee Shotgun Slug Mold 12 Gauge 1 oz.

Lee 1oz Slug Mold features the exclusive drive key which positively rotates the slug in rifled shotgun barrels. Includes sprue plate, handles and instruction with suggested loads.   1 OZ      diameter = .681 inches    ...

Lee Bullet Sizing Die Kit .309 Diameter

Lee .309 BULLET SIZING KIT sizes cast bullets, also seats and crimps gas checks. Fits any standard 7/8x14 thread reloading press. Lee Liquid Alox and Reloading Press are required to utilize this kit and are sold separately.

Lee Precision Melter 110V

High speed melter with an infinite heat control for the serious shooter. Easily handles 4-cavity molds. Takes less than 15 minutes to melt 4 pounds of metal. Same infinite heat control as used on the Product Pot. 500 watts AC only. The pot has a...

Lee Ultimate 4-Die Set for 6.5 Creedmoor

When it comes to reloading equipment Lee Precision is highly regarded as one of the best in the industry. Their extensive line of reloading gear is second to none, carrying just about everything you need for huge variety of calibers. You don't have to...

Lee 2-Cavity Bullet Mold (356 Diameter) 124 Grain RN

Lee Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and good...

Lee 6-Cavity Bullet Mold (358 Diameter) 140 Grain SWC

Designed for volume production, the Lee 6-Cavity Bullet Mold blocks are machined from commercial quality aluminum and feature steel bushing and alignment pins. Lee mold blocks are machined from aluminum blocks making them rust resistant. Aluminum molds...

Lee 2-Cavity Bullet Mold (440 Diameter) Round Ball

Lee Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and good...

Lee 2-Cavity Bullet Mold (401 Diameter) 175 Grain TC

Lee Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and good...

Lee 2-Cavity Bullet Mold (312 Diameter) 185 Grain RN w/Gas Check

Lee Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and good...

Lee 2-Cavity Bullet Mold (358 Diameter) 158 Grain SWC

Lee Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and good...

Lee 2-Cavity Bullet Mold (454 Diameter) Round Ball

Lee Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and good...

Lee 2-Cavity Bullet Mold (356 Diameter) 125 Grain RN

Lee Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and good...

Lee 2-Cavity Bullet Mold (452 Diameter) 200 Grain FN

Lee Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and good...

Lee 2-Cavity Bullet Mold (452 Diameter) 230gr TC

Lee Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and good...

Lyman Top 'G' Punch #191

Lyman Top Punches are precisely machined to fit the bullet nose shape exactly. This eliminates nose deformation. Fits Lyman 450/4500 Lube Sizer and RCBS Lube-A-Matic-2 Bullet Sizer/Lubricator.

Lee 2-Cavity Bullet Mold 50-320-REAL 50 Cal (.517) 320gr

Lee 2-Cavity Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds...

Lee 2-Cavity Bullet Mold .452 255gr Bullet Mold

Lee 2-Cavity Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds...

Lee 2-Cavity Bullet Mold .429 240gr SWC Mold

Lee 2-Cavity Bullet Mold C429-240-SWC 44 Special, 44 Remington Magnum, 44-40 WCF (429 Diameter) 240 Grain Semi-Wadcutter Gas Check:  Lee 2-Cavity Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee...

Lee 18-Cavity Bullet Mold (360 Diameter) 000 Buckshot

The Lee 18-Cavity 000 Buckshot Mold is a great choice for reloaders looking for a quality mold at an affordable price. Now you can produce 000 Buckshot ammunition for less than the cost of a standard trap load. The mold blocks are machined from aluminum,...

Lee 18-Cavity Bullet Mold (240 Diameter) #4 Buckshot

The Lee 18-Cavity #4 Buckshot Mold is a great choice for reloaders looking for a quality mold at an affordable price. Now you can produce #4 Buckshot ammunition for less than the cost of a standard trap load. The mold blocks are machined from aluminum,...

Lee 4-Cavity Ingot Mold with Handle

The Lee 4-Cavity Ingot Mold is used to cast 1/2 and 1 pound ingots. It features a hard wood handle that stays cool even during extended casting sessions and the aluminum mold is lightweight to help reduce fatigue. Another of the great features of the...

Lyman Top Punch #429

Lyman Top Punches are precisely machined to fit the bullet nose shape exactly. This eliminates nose deformation. Fits Lyman 450/4500 Lube Sizer and RCBS Lube-A-Matic-2 Bullet Sizer/Lubricator. See Technical Information below for specific bullet mold fit...

Lee Production Pot Four Furnace 110 Volt

The Lee Production Pot Four Furnace is a great furnace for any caster looking for a reliable furnace that features a deep pot with 10 pound capacity, Infinite heat control, 500 watts of power and a melt time of approx. 20 minutes. The Production Pot Four...