Shell Holders & Shell Plates

Lee 45-70 LEVEREVOLUTION Case Gauge & Shell Holder

Lee 45/70 LeverEvolution Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Use with the Deluxe Case Conditioning Kit, Case Conditioning Kit, or Cutter and Lock...

Hornady Shell Holder #24, 7.65 Belgian

Precision machined from solid steel and heat-treated to perform flawlessly. Wide mouth and rounded edge at the opening allow smoother case insertion. Hornady steel shell holders also fit most other...

Hornady Shell Holder #52, (338 Marlin Express)

Precision machined from solid steel then heat treated to perform flawlessly for the life of the press. They fit all other Hornady accessories including the Hornady Cam-Lock Case Trimmer and Hand-Held...

Hornady Shell Holder #25

10.3x60R Swiss/348 Winchester/500 Linebaugh/50 Alaskan

Lee BL Pro Shell Plate #19

Lee Load-Master progressive 5-hole reloading kit for 44 Special/44 Magnum. Includes dies (Full Length Size, Powder Through Expanding and Bullet Seating Dies), Turret, #11L Shell Plate, Pro Auto-Disk...

Hornady #41 Shell Holder

Shell Holder #41

RCBS Shell Holder #25

RCBS ensures a secure, firm grip on your cases. Using the very finest steel available, they create these shell holders to prevent you from running into headspace and sizing problems.Fits:8mm Nambu

Hornady #46 Shell Holder for .460 S&W

Precision machined from solid steel and heat-treated to perform flawlessly. Wide mouth and rounded edge at the opening allow smoother case insertion.   Caliber: .460 S&W

Hornady #17 Shell Holder for 224 Weatherby Magnum

Precision machined from solid steel and heat-treated to perform flawlessly. Wide mouth and rounded edge at the opening allow smoother case insertion.   Caliber: 224 Weatherby Magnum

Hornady #13 Shell Holder for 7x57mm Mauser

Precision machined from solid steel and heat-treated to perform flawlessly. Wide mouth and rounded edge at the opening allow smoother case insertion.   Caliber: 7x57mm Mauser 

Hornady #12 Shell Holder for .25 Remington

Precision machined from solid steel and heat-treated to perform flawlessly. Wide mouth and rounded edge at the opening allow smoother case insertion.   Caliber: .25 Remington, .30 Remington, 6.8mm...

RCBS 09234 Shell Holder #34

RCBS Single Stage shell holders are built from hardened steel and designed to properly align the case with the reloading die in single-stage and turret presses. They’re sized to fit specific case...

RCBS 09233 Shell Holder #33

RCBS Single Stage shell holders are built from hardened steel and designed to properly align the case with the reloading die in single-stage and turret presses. They’re sized to fit specific case...

Hornady #26 Shell Holder for 35 Remington

Precision machined from solid steel and heat-treated to perform flawlessly. Wide mouth and rounded edge at the opening allow smoother case insertion. Hornady steel shell holders also fit most other...

Hornady Shell Holder #7 (.218 Bee, .25-20 Win)

Specifications and Features:Snaps easily into single stage reloading pressHolds cartridge in perfect alignmentNo need to change rams or tighten set screwsMachined from solid steel

Hornady Shellholder #44 (500 S&W Magnum)

Precision machined from solid steel then heat treated to perform flawlessly for the life of the press. They fit all other Hornady accessories including the Hornady Cam-Lock Case Trimmer and Hand-Held...

Lee Precision 454 Casull Case Length Gauge & Shell Holder

Lee 454 CASULL Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim.

Lee Precision Auto Breech Lock Pro, Shell Plate #16

Auto Breech Lock Pro Shell Plate #16 Works with cartridges 480 Ruger, 500 Smith and Wesson

Lee Precision 223 WSSM Case Length Gauge & Shell Holder

Lee 223 WSSM Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim

Lee Precision Pro 1000 Shell Plate #1

Lee Pro Shell Plate #1 for quick caliber change for the Pro 1000 Press. For the 38 Special, 357 Mag and similar cases.

Lee Precision Breech Lock Pro Shell Plate #11

Breech Lock Pro Shell Plate # 11 Works with cartridges:  44 Special, 44 Magnum, 45 Colt.

Lee Precision Breech Lock Pro Shell Plate #4

Breech Lock Pro Shell Plate # 4  Works with cartridges:  222, 223, 380 Auto, 32 S&W Long, 32 H&R Magnum.

Lee Precision Breech Lock Pro Shell Plate #3

Breech Lock Pro Shell Plate # 3  Works with cartridges:  45 Winchester Mag.

Lee Precision 8x56R Case Length Gauge & Shell Holder

Lee 8x56 Hungarian-Mannlicher Case Length Gauge is a precise, easy way to trim to length and square the case

Lee Precision Breech Lock Pro Shell Plate #1

Breech Lock Pro Shell Plate # 1 

Lee Precision 450 Marlin Case Gauge & Shell Holder

Lee 450 MARLIN Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with Cutter and Lock Stud.   Trim to length 2.080 to 2.100 inches.

Lee Precision R12 Universal Shell Holder #12

Lee R12 Universal shell holder used in most brands of reloading presses. For 22 PPC, 6 PPC, 7.62x39 and similar cases. 

Lee Precision R11 Universal Shell Holder #11

Lee R11 Universal shell holder used in most brands of reloading presses. For 303 Savage, 444 Marlin, 44 Special/ Mag, 45 Colt and similar cases. 

Lee Precision R10 Universal Shell Holder #10

Lee R10 Universal shell holder used in most brands of reloading presses. For 220 Swift, 6.5 Jap, 7x64 Brenneke and similar cases.

Lee Precision R9 Universal Shell Holder #9

Lee R9 Universal shell holder used in most brands of reloading presses. For 41 Mag and similar cases.

Lee Precision R8 Universal Shell Holder #8

Lee R8 Universal shell holder used in most brands of reloading presses. For 33 Win, 348 Win, 40/65, 45/70 and similar cases.

Lee Precision R7 Universal Shell Holder #7

Lee R7 Universal shell holder used in most brands of reloading presses. For 30 M-1, 32 ACP and similar cases.

Lee Precision R6 Universal Shell Holder #6

Lee R6 Universal shell holder used in most brands of reloading presses. For 218 Bee, 25/20, 32/20 and similar cases.

Lee Precision R4 Universal Shell Holder #4

Lee R4 Universal shell holder used in most brands of reloading presses. For the 17 Rem, 204 Ruger, 221 Fireball, 222 Rem,  223 Rem, 7mm TCU and similar cases. 

Lee Precision R1 Universal Shell Holder #1

Lee R1 Universal shell holder used in most brands of reloading presses. For the 38 Long & Short Colt, 38 Special, 357 Mag and similar cases. 

Lee Precision 32Win SPL Case Length Gauge & Shell Holder

Lee 32 WIN SPL Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Use

Lee Precision 300 AAC Case Length Gauge & Shell Holder

Lee Case Length Gauges are a precise and easy way to trim brass cases to length and square the case mouth. Used with the Lee Cutter and Lock Stud or Zip Trim.

Lee Precision 243 WSSM Case Length Gauge & Shell Holder

Lee Case Length Gauges are a precise and easy way to trim brass cases to length and square the case mouth. Gauge and shell holder requires a Lee Cutter and Lock Stud to function.

Lee Precision 7mm WSM Case Length Gauge & Shell Holder

Lee Case Length Gauges are a precise and easy way to trim brass cases to length and square the case mouth. Gauge and shell holder requires a Lee Cutter and Lock Stud to function.

Lee Precision 357 Win Case Length Gauge & Shell Holder

Lee Case Length Gauges are a precise and easy way to trim brass cases to length and square the case mouth. Gauge and shell holder requires a Lee Cutter and Lock Stud to function.

Lee Precision 44Mag Case Length Gauge & Shell Holder

Lee Case Length Gauges are a precise and easy way to trim brass cases to length and square the case mouth. Gauge and shell holder requires a Lee Cutter and Lock Stud to function.

Lee Precision Auto Prime Shell Holder #14

Lee #14 Priming Tool shell holder used in Lee hand priming tools. For the 38/40, 44/40 and similar cases. 

Lee Precision 325 WSM Case Gauge & Shell Holder

Lee 325 WSM Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim 

Lee Precision 25 WSSM CASE GAUGE & SHELL HOLDER

Lee 25 WSSM Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with

Lee Precision 460 S&W CASE GAUGE & SHELL HOLDER

Lee 460 S&W Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim. Trim to length 1.780 to 1.800 inches.

Lee Precision 338 FEDERAL CASE GAUGE & SHELL HOLDER

Lee 338 FED Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with

Lee Precision Auto Prime Shell Holder #13

Lee Precision Auto Prime Shell Holder #9

Lee #9 Priming Tool shell holder used in Lee hand priming tools. For the 41 Mag and similar cases.

Lee Precision Auto Prime Shell Holder #8

Lee #8 Priming Tool shell holder used in Lee hand priming tools. For the 33 Win, 348 Win, 40/65, 45/70 and similar cases.

Lee Precision Auto Prime Shell Holder #7

Lee Precision Auto Prime Shell Holder #6

Lee Precision Auto Prime Shell Holder #5