ATV

Kimpex Adhesive Handlebar Grip Heater & Thumb Warmer Kit 925022 - 925022

Hi/Lo temperature adjustment for both grip and thumb warmer. Adhesive backing for easy installation Included #902025 + #912021 Volt : 13,5 V Number of watt at low intensity : 26,8 W Number of watt at hi intensity : 21 W Number of ampere at low intensity...

KFI Products Pro-Series Straight Plow Blade Steel - 219002

$$100% MADE IN USA $$Pushes snow straight ahead or to the sides up to 25 degrees Measures 16” Tall and available in 48”, 54", 60", 66" and 72" Wide Fully-adjustable blade skids with bolt-on brackets Heavy duty 3”-diameter grade-50 steel skid plates...

All Balls 6 Ball Heavy Duty Axle Fits Arctic cat - 214551

Heavy duty Chromoly bar. Durable Laminate coating resists rust and corrosion. Precision Machined and Polished joints for a smooth long-lasting joint. Exceeds OEM axle strength by up to 3.5 times. Up to 30% longer cycle life than competitors. Precision...

TrakMotiveHD Complete HD Axle Fits Arctic cat - 216462

Exceed OEM quality in fit, form and function Torture tested to failure to ensure maximum durability Designed to withstand the most rigorous conditions and terrain Manufactured in a state-of-the-art ISO9001 and TS16949 certified factory Reliable and...

KFI Products Push Frame - 219000

$$100% MADE IN USA$$ Heavy Duty 1-1/2” 11 Gage Steel Tubing Heavy Duty 1/4” Thick 1-1/2” Diameter Grade 50 Pivot Bushings 6” Diameter Zinc Plated Rotator Bushing Easy-Pull Pin Blade angle adjustment Multi-position Plow Lift Bracket 6 five degree blade...

EPI Tie Rod End Inner - 295903

EPI Quality, Heavy Duty Tie Rod Ends Huge selection, sold individually - replace only what you need! Polychloroprene rubber boots for long life and protection from dust, dirt, water and mud Cast and machined using top quality materials to match OEM specs...

Kimpex HD Rear Independent Suspension Bushing Kit Fits Arctic cat - 329001

Delrin BushingKimpex Data: Barcode: 779420806133 Supplier Number: 50-1129-KIMPKimpex Catalog Number: 329001Product Data:Compatible Brand: Fits Arctic catTypes: Independent SuspensionPosition: RearKit: YesNumber: 329001

All Balls Rear Independent Suspension Knuckle Kit Fits Arctic cat - 347097

Available for Utility and sport ATV's.Kimpex Data: Barcode: 779421902865 Supplier Number: 50-1224Kimpex Catalog Number: 347097Product Data:Compatible Brand: Fits Arctic catTypes: Knuckle GasketPosition: RearKit: YesNumber: 347097

EPI CV Boot Single Kit for Extreme Cold - 294478

Single boot kits include: 1 CV boot, 2 clamps and grease Very pliable in extreme cold applications Universal fit design Refer to the chart to find your model position.Kimpex Data: Barcode: 779422342011 Supplier Number: WE130119Kimpex Catalog Number:...

Click N GO Brakcet Drift Cutter plastic plow - 373942

Replacement partKimpex Data: Barcode: 779420206650 Supplier Number: 7815044-H1Kimpex Catalog Number: 373942Product Data:Designed for: ATVNumber: 373942

EPI CV Boot Single Kit for Extreme Cold - 294477

Single boot kits include: 1 CV boot, 2 clamps and grease Very pliable in extreme cold applications Universal fit design Refer to the chart to find your model position.Kimpex Data: Barcode: 779422342004 Supplier Number: WE130118Kimpex Catalog Number:...

Kimpex GEN 2 & GEN 3 Windshield Fastener - 479008

This sophisticated quick-attach system allows for installation in just a few seconds. $$ Combine style, comfort and innovation with windshield from KIMPEX! * This Bracket is needed to install a Flare Gen 2 and Flare Gen 3 windshield Refer to the chart...

All Balls Tapered Lower Steering Bearing & Seal Kit - 206777

Settles at the bottom of the handlebar Available for offroad, MX and ATV. Direct replacement for OEM tapered bearings. Upgrade replacement for ball style bearings Mix and match bearings/seals for front-end conversions. Heavy-Duty tapered roller bearings...

All Balls Tie Rod End Upgrade Kit 206776 - 206776

Tie rods are manufactured with heavy duty steel rods. Kit includes (1) tie rods ends (2) tie rods and all of the hardware for the full conversion. All components are strengthened in critical damage prone areas.Kimpex Data: Barcode: 779422384059 Supplier...

Click N GO Electric Actuator Bracket for Plow Angle Adjustment without Extension - 373925

Electric actuator bracket kit for plow angle adjustment. Work on both ATV and UTV. Work only on CnG 2 without extension. Need Actuator: SKU actuator ATV: 373930 SKU actuator UTV: 374980 Kimpex Data: Barcode: 779421615581 Supplier Number: 7810687Kimpex...

All Balls Tie Rod End Upgrade Kit 206765 - 206765

Tie rods are manufactured with heavy duty steel rods. Kit includes (1) tie rods ends (2) tie rods and all of the hardware for the full conversion. All components are strengthened in critical damage prone areas.Kimpex Data: Barcode: 779422383946 Supplier...

EPI CV Boot Single Kit - 294439

Single boot kits include: 1 CV boot, 2 clamps and grease High quality replacement part *Refer to the chart to find your model position.Kimpex Data: Barcode: 779422341342 Supplier Number: WE130072Kimpex Catalog Number: 294439Product Data:Compatible...

Kimpex Universal Joint - 158715

Snap rings included 3 possible locations for zerk depending on models (center, end or corner) Some do not have any Zerk. In order to know the exact position of every joint made for your ATV model, refer to the chart in Kimpex ATV & UTV catalogue online...

EPI CV Boot Single Kit - 294438

Single boot kits include: 1 CV boot, 2 clamps and grease High quality replacement part *Refer to the chart to find your model position.Kimpex Data: Barcode: 779422341359 Supplier Number: WE130070Kimpex Catalog Number: 294438Product Data:Compatible...

Kimpex Universal Joint - 158628

Snap rings included 3 possible locations for zerk depending on models (center, end or corner) Some do not have any Zerk. In order to know the exact position of every joint made for your ATV model, refer to the chart in Kimpex ATV & UTV catalogue online...

Kimpex Universal Joint - 158627

Snap rings included 3 possible locations for zerk depending on models (center, end or corner) Some do not have any Zerk. In order to know the exact position of every joint made for your ATV model, refer to the chart in Kimpex ATV & UTV catalogue online...

VertexWinderosa Top End Gasket Fits Arctic cat, Fits Suzuki - 059343 - 059343

810 - Top End Gasket Sets : Designed for piston replacement, these sets include the head, base, exhaust pipe and upper end gaskets including valve seals Multi cylinder machines include enough components to rebuild all cylinders Does not include formed...

Kimpex GEN 2 Windshield Fits Honda, Fits Kawasaki, Fits Suzuki, Fits Yamaha, Fits Can-am, Fits Ski-doo, Fits Polaris, Fits Arctic cat, Fits CFMoto - 579800

This rigid new windshield reduces vibrations, is equipped with fixation points for the mirrors and its aerodynamic system eliminates all air flow that is usually felt on the driver’s back. See-through handguard section for a better vision...

Kimpex HD Flywheel Puller Fits Suzuki, Fits Arctic cat - 285704 - 285704

mm x hand male or female Includes crankshaft thread protector cap All products are tested One year limited warranty Refer to the chart to find your model.Kimpex Data: Barcode: 779420193639 Supplier Number: SF-070-003191Kimpex Catalog Number:...

Duro Power Grip DI2025 Tire - 25x8R12 - 013621

This radial constructed tire is designed to help alleviate the hard-impact when riding on rough trails with pits or gravel and boost the driving comfort. Innovative sidewall design aids in protecting the shoulder from being punctured and protection to...

All Balls 6 Ball Heavy Duty Axle Fits Arctic cat - 214509

Heavy duty Chromoly bar. Durable Laminate coating resists rust and corrosion. Precision Machined and Polished joints for a smooth long-lasting joint. Exceeds OEM axle strength by up to 3.5 times. Up to 30% longer cycle life than competitors. Precision...

Kenda Bearclaw EVO K592 Tire - 25x8-12 - 356414

The evolution of the original gold-standard Bearclaw is finally here. With a priority on reducing weight, without sacrificing durability, Bearclaw has raised the bar in all areas of performance. With a priority on reducing weight, without sacrificing...

All Balls 6 Ball Heavy Duty Axle Fits Arctic cat - 214507

Heavy duty Chromoly bar. Durable Laminate coating resists rust and corrosion. Precision Machined and Polished joints for a smooth long-lasting joint. Exceeds OEM axle strength by up to 3.5 times. Up to 30% longer cycle life than competitors. Precision...

All Balls Rear Independent Suspension Rebuild Kit Fits Arctic cat - 208001

Available for Utility and sport ATV's. All the parts required to rebuild one side of an ATV rear suspension.(Upper and Lower A-Arm and Knockle) Bushings: Self lubricating, durable nylon (Acetal)or case hardened and plated for long life corrosion...

All Balls 6 Ball Heavy Duty Axle Fits Arctic cat - 214505

Heavy duty Chromoly bar. Durable Laminate coating resists rust and corrosion. Precision Machined and Polished joints for a smooth long-lasting joint. Exceeds OEM axle strength by up to 3.5 times. Up to 30% longer cycle life than competitors. Precision...

Kimpex HD A-Arm Rebuild Kit Fits Kawasaki, Fits Arctic cat - 327996

Rebuids 1 A-Arm. Full-compliment needle bearings 52100 Bearing steel hardened and precision ground Cup seal Thrust shims Double lip seals Type TC * 2 A-Arm Repair Kits per vehicle are required for front position only.Kimpex Data: Barcode: 779420806034...

All Balls A-Arm Repair Kit Fits Polaris - 207996

Kit contains all of the components required to rebuild the lower A-Arm and knuckle. Needle bearing shafts are made with 52100 bearing steel that has been hardened and precision ground. Self-lubricating Acetal nylon bushings protect better against wear...

All Balls Carburetor Float Bowl Gasket Kit Fits Arctic cat, Fits Kawasaki - 307298 - 307298

An economical way to reseal a leaky carburetor. Includes one gasket per kit. Multi carburetor bikes will require multiple kits (except 46-5096). Applications that use paper float bowl gaskets are upgraded to high performance Interface gasket material...

All Balls Carburetor Float Bowl Gasket Kit Fits Kawasaki, Fits Arctic cat, Fits Suzuki - 307297 - 307297

An economical way to reseal a leaky carburetor. Includes one gasket per kit. Multi carburetor bikes will require multiple kits (except 46-5096). Applications that use paper float bowl gaskets are upgraded to high performance Interface gasket material...

Kimpex Fender Protector Fits Arctic cat - 473022 - 473022

Kimpex ATV Fender Guards Kimpex fender guards are an essential complement for every ATV trunk seat or back seat. They are custom made for most popular lines of ATVs on the market, and that is why they fit so well to the shape of your Quad, with the...

KFI Products Winch Bracket 218643 - 218643

Specifications: Designed to fit in the new winch pocket between the headlights. Constructed of 3/16" steel Powder coated black for supreme durability Heavy duty welded one piece design Complete installation instructions included Easy to install Easy...

Kimpex HD Stator Fits Arctic cat - 285685 - 285685

Direct replacement to your original unit Plug-and-play, direct fit, easy installation Highest grade lamination materials Highest grade copper windings, resistant to 200 degrees Celsius Connector included Rubber grommet included All products shipped are...

EPI Universal Joint - 294412

High quality Grease zerks on mostKimpex Data: Barcode: 779422341830 Supplier Number: WE100510Kimpex Catalog Number: 294412Product Data:Tip length: Total length: Zerk: YesSnap ring included: YesPosition: Varies by modelModel number: WE100510

Kimpex HD A-Arm Rebuild Kit Fits Kawasaki, Fits Arctic cat - 327984

Rebuids 1 A-Arm. Full-compliment needle bearings 52100 Bearing steel hardened and precision ground Cup seal Thrust shims Double lip seals Type TC * 2 A-Arm Repair Kits per vehicle are required for front position only.Kimpex Data: Barcode: 779420806010...

Pivot Works Wheel Bearing Kit - 054464

Restores steering and braking control due to worn or rusted wheel bearings. Kit includes two or more double sealed wheel bearings and two wheel hub seals. Honda rear wheel kits include aluminum bearing retainer when used. Kits are available separately...

Kimpex Trunk Lens Taillight - 299233

ATV Trunk Lens Taillights fitting with Deluxe model. Sold individually.Kimpex Data: Barcode: 779421855321 Supplier Number: 299233Kimpex Catalog Number: 299233Product Data:Fits on: Cargo Deluxe trunkPosition: RearColor: RedSold: UnitNumber: 299233

All Balls A-Arm Repair Kit Fits Arctic cat - 207984

Kit contains all of the components required to rebuild the lower A-Arm and knuckle. Needle bearing shafts are made with 52100 bearing steel that has been hardened and precision ground. Self-lubricating Acetal nylon bushings protect better against wear...

Kimpex GEN 2/2.1 Bumper Bracket Fits Arctic cat - 573096

All mounting hardwares necessary to securely install your bumper. $$ (Bumper sold separately) Note: To make sure you buy the right binding and the right bumper for your vehicle, refer to the tool "Search by ride" which is to the right of the home page...

Kimpex Fender Protector Fits Arctic cat - 573074 - 573074

Kimpex ATV Fender Guards Kimpex fender guards are an essential complement for every ATV trunk seat or back seat. They are custom made for most popular lines of ATVs on the market, and that is why they fit so well to the shape of your Quad, with the...

Kimpex HD Differencial Bearing Repair Kit Fits Kawasaki, Fits Kymco, Fits Arctic cat - 327938

Available for Utility ATVs. All the bearings and seals needed to repair a differential. Precision ball bearings Machine race needle bearings Repair sleeve for worn pinion shafts: The pinion shaft can be machined and this sleece installed saving handreds...

Kimpex Starter Brush Kit 193756 - 193756

Brush kits for OEM only.Kimpex Data: Barcode: 779420169344 Supplier Number: MDS010Kimpex Catalog Number: 193756Product Data:Compatible Brand: Fits Arctic catNumber: 193756

All Balls Tie Rod End Inner, Outer - 207975

Tie rod ends and jam nuts. Housings have been strengthened in critical areas.Kimpex Data: Barcode: 779423033789 Supplier Number: 51-1052Kimpex Catalog Number: 207975Product Data:Compatible Brand: Fits Arctic catPosition: InnerPosition: OuterThread...

FIRESTIK Plow Snow Marker - 158241

Increased visibility and safety Made of flexible 3/8’’ fiberglass rod Measures 25.5 inches Can be cut down to desired length Sold in pair Kimpex Data: Barcode: 779422407901 Supplier Number: F2-ST2X-RKimpex Catalog Number: 158241Product Data:Material:...

All Balls Tie Rod End Inner, Outer - 206404

Tie rod ends and jam nuts. Housings have been strengthened in critical areas.Kimpex Data: Barcode: 779420716289 Supplier Number: 51-1027Kimpex Catalog Number: 206404Product Data:Compatible Brand: Fits KawasakiCompatible Brand: Fits KymcoCompatible...

All Balls Brake Master Cylinder Rebuild Kit Fits Arctic cat - Front - 347026

Kit contains all of the components to re-seal leaking master cylinders. Kit includes copper washers, cup seals, replacement screws where applicable, and O-rings. KTM/Husqvarna : Kit includes: replacement hard anodized aluminum piston, replacement...

Kimpex Universal Muffler - 418002

These universal ATV mufflers were designed to replace most OEM exhaust systems Manufactured of steel with baked, black paint finish with spark arrestor The internal construction and curved tailpipe, makes this a very quiet muffler that is economical and...

K&N High-Flow OEM Air Filter Fits Arctic cat - 027043

Designed to provide increased performance Pleated media provides a large filtration area offering long service intervals Multi-Layers of woven cotton gauze media offers excellent filtration Fits directly into OEM Airbox with application specific Sealing...