Equipment & Supplies

Lee 18-Cavity Bullet Mold (360 Diameter) 000 Buckshot

The Lee 18-Cavity 000 Buckshot Mold is a great choice for reloaders looking for a quality mold at an affordable price. Now you can produce 000 Buckshot ammunition for less than the cost of a standard trap load. The mold blocks are machined from aluminum,...

Lee 18-Cavity Bullet Mold (240 Diameter) #4 Buckshot

The Lee 18-Cavity #4 Buckshot Mold is a great choice for reloaders looking for a quality mold at an affordable price. Now you can produce #4 Buckshot ammunition for less than the cost of a standard trap load. The mold blocks are machined from aluminum,...

Lee Case Length Gauge and Shellholder 243 Winchester

The Lee Case Length Gage is a precise and easy way to trim brass cases to length and square the case mouth. Requires a Lee Cutter and Lock Stud to function. The first step to successfully trimming brass cases with the Lee Case Length Gage and...

Lee Carbide 3-Die Set 38 Special, 357 Magnum

The Lee Carbide 3-Die Set is a great set of reloading dies for any reloader looking for a set of dies that will produce accurate ammunition for many years. Lee dies are made to exacting tolerances helping to create accurate ammunition every time they are...

Lee Carbide 3-Die Set 9mm Luger

The Lee Carbide 3-Die Set is a great set of reloading dies for any reloader looking for a set of dies that will produce accurate ammunition for many years. Lee dies are made to exacting tolerances helping to create accurate ammunition every time they are...

Lee Pacesetter 2-Die Set 338 Lapua Magnum

Lee Limited Production Pacesetter Die Sets are built to last a lifetime and are great at producing factory like ammunition. Each 2-Die set comes shipped with a Full-Length Sizer die and Bullet seating die. Also included is the appropriate shellholder,...

Lee Carbide 3-Die Set 500 S&W Magnum

The Lee Carbide 3-Die Set is a great set of reloading dies for any reloader looking for a set of dies that will produce accurate ammunition for many years. Lee dies are made to exacting tolerances helping to create accurate ammunition every time they are...

Lee Classic Loader 243 WIN

The Lee Classic Reloader is the perfect kit for someone who would like to start reloading one caliber without breaking the bank. Contains everything you need to begin loading (except a hammer). Kit includes Sizing Die, Decapping Chamber, Bullet Seater...

Lee Classic Loader 223 Remington

The Lee Classic Reloader is the perfect kit for someone who would like to start reloading one caliber without breaking the bank. Contains everything you need to begin loading (except a hammer). Kit includes Sizing Die, Decapping Chamber, Bullet Seater...

Lee 4-Cavity Ingot Mold with Handle

The Lee 4-Cavity Ingot Mold is used to cast 1/2 and 1 pound ingots. It features a hard wood handle that stays cool even during extended casting sessions and the aluminum mold is lightweight to help reduce fatigue. Another of the great features of the...

Lyman Top Punch #429

Lyman Top Punches are precisely machined to fit the bullet nose shape exactly. This eliminates nose deformation. Fits Lyman 450/4500 Lube Sizer and RCBS Lube-A-Matic-2 Bullet Sizer/Lubricator. See Technical Information below for specific bullet mold fit...

Hornady Lock-N-Load AP Shellplate #10 357 Sig, 40 S&W, 10mm Auto

The Hornady Lock-N-Load AP Progressive Press Shellplate makes changing calibers a breeze on your Hornady Lock-N-Load Press and the older Hornady Projector Press. There is a shellplate available to fit almost every caliber. The shellplate numbers...

Hornady Lock-N-Load AP Progressive Press Shellplate #28 (38 S&W)

The Hornady Lock-N-Load AP Progressive Press Shellplate makes changing calibers a breeze on your Hornady Lock-N-Load Press and the older Hornady Projector Press. There is a shellplate available to fit almost every caliber. The shellplate numbers...

Hornady Lock-N-Load Overall Length Gage Automatic/Lever Action

The Hornady Lock-N-Load Overall Length Gage is one of the best kept secrets to accurate reloading. This tool allows reloaders to quickly and easily determine the "proper" bullet seating depth in their firearm by accurately measuring their rifles freebore...

Hornady Lock-N-Load Overall Length Gage Modified Case 30-06 Sprg

Hornady has been making quality reloading equipment and components for over sixty years. The Lock-N-Load Overall Length Gage Modified Cases are no exception. These gages are needed to measure the bullet relationship to the lands of a barrel when being...

Lee Production Pot Four Furnace 110 Volt

The Lee Production Pot Four Furnace is a great furnace for any caster looking for a reliable furnace that features a deep pot with 10 pound capacity, Infinite heat control, 500 watts of power and a melt time of approx. 20 minutes. The Production Pot Four...

Hornady Shellholder #40 (50 Action Express)

Precision machined from solid steel then heat treated to perform flawlessly for the life of the press. They fit all other Hornady accessories including the Hornady Cam-Lock Case Trimmer and Hand-Held Priming Tool. These shellholders will also fit the...

Hornady Shellholder #35 (223 WSSM, 243 WSSM, 300 WSM)

Precision machined from solid steel then heat treated to perform flawlessly for the life of the press. They fit all other Hornady accessories including the Hornady Cam-Lock Case Trimmer and Hand-Held Priming Tool. These shellholders will also fit the...

Hornady Shellholder #2 (30-30 WIn, 32 Special, 7.5x55)

Precision machined from solid steel then heat treated to perform flawlessly for the life of the press. They fit all other Hornady accessories including the Hornady Cam-Lock Case Trimmer and Hand-Held Priming Tool. These shellholders will also fit the...

Hornady 9x19/9x21 Taper Crimp Custom Grade 3 Die Set

Hornady Custom Grade New Dimension Nitride 3-Die sets includes CGND Nitride Full-length Sizing Die, CGND Adjustable Case Mouth Expander Die and CGND Seater Die with taper crimp. The sizer die features Titanium Nitride sizing rings that eliminate case...

Lee Ram Prime Priming Unit for Single Stage Press

The Lee Ram Prime Priming Unit allows the reloader to prime on the up-stroke for a more sensitive feel and increased leverage. Included are easy to change punches for both large and small primers. Fits all brands of single stage presses. This is the same...

Lee Pro 4 20 Lb Lead Furnace

The Lee Pro 4 20 Lb Furnace is a great furnace for any bullet caster looking for a solid reliable furnace without breaking the bank. The Pro 4 features an extra-large 4" diameter pot with generous 20 lb capacity, a long life 700-watt tubular heating...

Lee Auto Prime XR Hand Priming Tool

The Lee Auto Prime XR Hand Priming Tool is the updated version of a time tested classic. The XR has been designed to work with every brand of primer and features the patent pending "elevator pin" which safely separates a single primer from the tray...

Hornady Cam-Lock Bullet Puller Collet #1 17 Caliber (.171)

The Hornady Cam-Lock Bullet Puller is one of the fastest and easiest ways to pull bullets with a reloading press. Collets are the part of the system that clamp to the bullet so it can be removed quickly and easily. Technical Information Fits: Hornady...

Hornady Lock-N-Load Muzzleloading Bullet Ramrod End for 50 Cal

The Hornady Lock-N-Load Muzzleloading Bullet Ramrod End is designed to make muzzleloading bullets "straighten up and fly right" in muzzleloading guns that do not have free bore. This helps Hornady FPB bullets start straight and stay straight out of the...

Hornady Durachrome Die Decapping Pin Large Package of 6

    The Hornady Durachrome Die Decapping Pins are great for replacing your broken or worn out pins in your Hornady Durachrome dies. These decapping pins will not fit the New Dimension dies. Technical Information Note:     .22...

Hornady Case Lube Pad and Reloading Tray

The Hornady Case Lube Pad and Reloading tray is the perfect addition to any reloading bench. Apply sizing lube to the pad, then roll cases over the pad. Technical Information Function: Pad to Lubricate and Hold Cases Material: Plastic Capacity: 50...

Lee Reloader Single Stage Press

This is the perfect press for the reloader looking to try their hand at reloading without spending a lot for a press. This outstanding value has many features such as the exclusive balanced lever that wont drop down to pinch fingers, unlimited hand...

Hornady One Shot Tumbler Corn Cob Media 3.75 lb Jug

Hornady One Shot case tumbling media was engineered as an abrasive media to remove tarnish and other residues from cartridge cases before reloading. Dirt and grime that is left on cartridge cases can prematurely wear out reloading equipment so it is a...

Hornady 17 Hornet Custom Grade 2 Die Set

This die set includes Custom Grade New Dimension (CGND) Full Length Sizer and a CGND Seating Die. The Full Length Die now features a Zip Spindle with a series of light threads cut on the spindle and spindle collet to eliminate slippage and make it easier...

Lee Universal Shellholder #19 (9mm Luger, 40 S&W, 10mm Auto)

Universal shellholder works with virtually any single stage press. Will not work with Lee Auto Prime.     Technical Information Fits: 30 Luger 30 Mauser 9mm Luger 38 Super 39 ACP 40 Smith & Wesson 10mm Auto 41 Action...

Hornady Shellholder #50 (50 BMG)

Precision machined from solid steel then heat treated to perform flawlessly for the life of the press. This shellholder is designed to fit the Hornady 50 BMG reloading press. Please see the Technical Specifications or click the link below for specific...

RCBS 09227 Shell Holder #27

If your shell holder doesn't securely grip the sell and firmly fit into the press during reloading, you're bound to have headspace and sizing problems. RCBS manufactures their shell holders to the industry's tightest tolerances, using only the finest...

RCBS 09216 Shell Holder #16

If your shell holder doesn't securely grip the sell and firmly fit into the press during reloading, you're bound to have headspace and sizing problems. RCBS manufactures their shell holders to the industry's tightest tolerances, using only the finest...

RCBS 09209 Shell Holder #9

If your shell holder doesn't securely grip the sell and firmly fit into the press during reloading, you're bound to have headspace and sizing problems. RCBS manufactures their shell holders to the industry's tightest tolerances, using only the finest...

Hornady Shellholder #11 (30-40 Krag, 303 British)

Precision machined from solid steel then heat treated to perform flawlessly for the life of the press. They fit all other Hornady accessories including the Hornady Cam-Lock Case Trimmer and Hand-Held Priming Tool. These shellholders will also fit the...

Hornady Shellholder #37 (5.7x28mm FN, 25 ACP)

Precision machined from solid steel then heat treated to perform flawlessly for the life of the press. They fit all other Hornady accessories including the Hornady Cam-Lock Case Trimmer and Hand-Held Priming Tool. These shellholders will also fit the...

Hornady Shellholder #22 (30 Carbine, 32 ACP)

Precision machined from solid steel then heat treated to perform flawlessly for the life of the press. They fit all other Hornady accessories including the Hornady Cam-Lock Case Trimmer and Hand-Held Priming Tool. These shellholders will also fit the...

Hornady Shellholder #9 (38-40 WCF, 44-40 WCF)

Precision machined from solid steel then heat treated to perform flawlessly for the life of the press. They fit all other Hornady accessories including the Hornady Cam-Lock Case Trimmer and Hand-Held Priming Tool. These shellholders will also fit the...

Hornady Lock-N-Load Sonic Cleaner, 2L Ultra Sonic Heated

The Hornady Lock-N-Load Sonic Cleaner 2L takes cartridge case and gun parts cleaning to the next level. By using a combination of intense ultrasonic cleaning action, 80 watt ceramic heater and unique One Shot Sonic cleaning solution, this extremely...

Hornady 380 Auto Custom Grade 3 Die Set Nitride

The Hornady Custom Grade New Dimension Nitride 3-Die Set is a great die set for the avid reloader. The set includes a CGND Nitride Full-length Sizing Die, CGND Adjustable Case Mouth Expander Die, and CGND Seater Die with roll crimp. The Sizer Die...

Hornady 9mm Luger & 9x21 Custom Grade, Nitride 3-Die Set

The Hornady Custom Grade New Dimension Nitride 3-Die Set is a great die set for the avid reloader. The set includes a CGND Nitride Full-length Sizing Die, CGND Adjustable Case Mouth Expander Die, and CGND Seater Die with roll crimp. The Sizer Die...

Hornady 375 H&H Custom Grade 2 Die Set

This die set includes Custom Grade New Dimension (CGND) Full Length Sizer and a CGND Seating Die. The Full Length Die now features a Zip Spindle with a series of light threads cut on the spindle and spindle collet to eliminate slippage and make it easier...

Hornady 300 Weatherby (.308) Custom Grade 2 Die Set

This die set includes Custom Grade New Dimension (CGND) Full Length Sizer and a CGND Seating Die. The Full Length Die now features a Zip Spindle with a series of light threads cut on the spindle and spindle collet to eliminate slippage and make it easier...

Hornady 7mm Express & 280 Rem Custom Grade 2 Die Set

This die set includes Custom Grade New Dimension (CGND) Full Length Sizer and a CGND Seating Die. The Full Length Die now features a Zip Spindle with a series of light threads cut on the spindle and spindle collet to eliminate slippage and make it easier...