Scope Mounts & Rings

SPUHR DOCTER/VENOM INTERFACE

Interface for attaching Docter/Noblex and Burris FastFire (1 through 4) sights to the ISMS-series scope mount. Includes screws. The A-0011 footprint also matches the following, though screw head sizing may vary: • Docter/Noblex Sight C / Sight 2+ /...

SPUHR Hunting Mount Ø30 H30MM/1.18” 0MIL TRG

Our new Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts.The SCT-3001 is designed for the Tikka T3X, but will also fit on the SAKO TRG 22/42, and features one classic ring and one...

Riton Conquer 1 Rifle Scope, 6-24x50, SFP

The X1 Conquer 6-24×50 is a powerful optic providing features and enhancements at a fraction of the cost. The riflescope features approximately 67 Minutes of Angle (MOA) of internal elevation adjustment, as well as an integrated throw lever,...

Vortex Cantilever Ring Mount: 30mm Tube, 3-Inch Offset

Vortex cantilever ring mounts provide the correct height and forward placement for proper scope mounting on flattop ARs. Available for 30mm tubes in 2 inch or 3 inch offset. 1.59" / 40.39mm Height Torque Specs Base Clamp Screws 20 in/lbs Ring...

Vortex Swing Mount for VMX3 Magnifier

The Swing Mount for VMX3 Magnifier from Vortex allows a shooter to transit from 1x to 3x in one quick motion. The Swing Mount easily attaches to the gun's rail and the VMX3 Magnifier is inserted into the mount. Once installed, a specialized cam on...

Vortex Razor Red Dot Handgun Mount, Smith & Wesson M&P

Slide mount for Razor red dot replaces the Picatinny rail mount included with the Razor red dot. Allows installation on Smith & Wesson M&P handguns. Will not work with Viper or Venom Red Dots.

Vortex Razor Red Dot, Weaver Mount

Low Weaver rail mount for the Razor red dot. Replaces Picatinny rail mount included with the Razor red dot. Allows installation on Weaver base. Will not work with Viper or Venom Red Dots.

Talley 30mm High Rimfire Rings for CZ 452 European, 455, 457, 512 513

Talley 30CZRH 30mm Rimfire Rings for CZ 452 European, 455, 457, 512, 513; Steyr Zephyr II; Marlin 60 , 11mm dovetail , Low

SPUHR ISMS RINGS, Ø30 H25.4MM/1” PIC

The Spuhr SR-3000 are precision-engineered scope rings designed for secure attachment of 30mm diameter riflescopes. The two-piece design allows for flexibility in positioning on Picatinny or Weaver rails. These Spuhr SR-3000 rings feature a height of 1...

CZ 600 Picatinny Rail, Mini

Picatinny rail for CZ 600 Range and Lux centerfire rifles. For “Mini” Upper Receiver. Made from steel. For mounting use short screw forward, longer backward and glue it. Part: 4401-0010-01  

Vortex Hunter 1" Low Mount Ring Set of 2

Mounting to a Picatinny or Weaver type raiL, the standard, 2-screw Hunter rings are a nice match for general hunting setups.Made from aircraft-grade 6061-T6 aluminum for optimum strength.  

AIMPOINT LENS COVER, FLIP-UP, FRONT TRANSPARENT

This is a transparent lens cover made of durable rubber with snap closure and flip-up function. The cover is easy to flip up and stays in the up position until it is quickly and easily folded down manually and closes tightly with a small snap. The...

Sun Optics 1-Piece Aluminum Scope Base, for Ruger 10/22

Designed for your Ruger 10/22 rifle, the Sun Optics 1-Piece Aluminum Scope Base is a well-suited mount for your scope or optic of choice. Featuring aluminum construction and ventilated design, the base can be installed by the user, with no...

Vortex Sport Cantilever Mount 30mm - 1.5"

The 2" offset gets your head position and eye relief dialed, while leaving plenty of real estate on your rail. Lightweight, but with the power to stand up to recoil and the rigors of range day, these mounts get you shooting faster and easier, with...

S&J Sierra RD Optics Plate, Acro Mount, Beretta 1301

The Sierra RD Optic plate is available for the following shotgun manufacturers: Beretta - 1301 tactical (will not fit the 1301 comp) The Sierra RD Optics Plate is available in the following configurations: Acro Mount - Aimpoint Acro P1/P2/...

S&J Sierra RD Optics Plate, RMR Mount, Mossberg

The Sierra RD Optic plate is available for the following shotgun manufacturers: Mossberg - 500, 590, 930 The Sierra RD Optics Plate is available in the following configurations: RMR Mount - Trijicon RMR/ Holosun...

S&J Sierra RD Optics Plate, RMR Mount, Beretta 1301

The Sierra RD Optic plate is available for the following shotgun manufacturers: Beretta - 1301 tactical (will not fit the 1301 comp) The Sierra RD Optics Plate is available in the following configurations: RMR Mount - Trijicon RMR/ Holosun...

S&J Sierra RD Optics Plate, RMR Mount, Benelli M4

The Sierra RD Optic plate is available for the following shotgun manufacturers: Benelli - M4, Nova, Stoeger M3K The Sierra RD Optics Plate is available in the following configurations: RMR Mount - Trijicon RMR/ Holosun...

Leupold RM CZ 527 Rimfire Rings, 30mm, High, Matte

Leupold® ringmounts are a high-quality alternative to firearm manufacturer ringmounts or as a no-tap mounting method for most .22 rimfire rifles with an 11mm, 13mm, or 3/8'' dovetail rail. This model is designed to fit a CZ 527, and because...

Leupold RM CZ 527 Rimfire Rings, 1", High, Matte

Leupold® ringmounts are a high-quality alternative to firearm manufacturer ringmounts or as a no-tap mounting method for most .22 rimfire rifles with an 11mm, 13mm, or 3/8'' dovetail rail. This model is designed to fit a CZ 527, and because...

Leupold Backcountry Cross-Slot Savage 10, Round Receiver, SA, 20 MOA, 1 Piece Rail

Leupold® BackCountry cross-slot bases are made of 7075-T6 aluminum, making them some of our lightest and most rugged mounts yet. This BackCountry cross-slot base is designed to fit a Savage 10 Round Receiver Short Action and accepts both...

Leupold Backcountry Cross-Slot Savage 10, Round Receiver, SA, 1 Piece Rail

Leupold BackCountry cross-slot bases are made of 7075-T6 aluminum, making them some of our lightest and most rugged mounts yet. This BackCountry cross-slot base is designed to fit a Savage 10 Round Receiver Short Action and accepts both Picatinny-...

Leupold Backcountry Cross-Slot Marlin 336, 1 Piece Rail

Leupold BackCountry cross-slot bases are made of 7075-T6 aluminum, making them some of our lightest and most rugged mounts yet. This BackCountry cross-slot base is designed to fit a Marlin 336 and accepts both Picatinny- and Weaver-style rings. Nothing...

SPUHR 7mm Green Level

7 mm green bubble level for unimount. Rubber gaskets included (2 pcs). Note: Will not fit SR-series of rings.

Sun Optics Shotgun Saddle Scope Mount for Mossberg 835/535, 12 Gauge

This Shotgun Saddle Scope Mount provides a Picatinny mount base for your Mossberg 835/535 12 Gauge shotgun. Made of aluminum, this full receiver length rail installs easily using existing ports. 

Leupold Open Range Rimfire Cross-Slot Rings, 30mm, High

Designed as a premium alternative to factory ringmounts, the Open Range Rimfire delivers a secure, no-tap solution for most .22 rimfire rifles with 11mm, or 3/8" dovetail rails. This set of rings fits any riflescope with a 30mm maintube. Height: ...

Leupold Open Range Rimfire Cross-Slot Rings, 30mm, Medium

Designed as a premium alternative to factory ringmounts, the Open Range Rimfire delivers a secure, no-tap solution for most .22 rimfire rifles with 11mm, or 3/8" dovetail rails. This set of rings fits any riflescope with a 30mm maintube. Height: ...

Leupold Open Range Rimfire Cross-Slot Rings, 1", High

Designed as a premium alternative to factory ringmounts, the Open Range Rimfire delivers a secure, no-tap solution for most .22 rimfire rifles with 11mm, or 3/8" rails. This set of rings fits any riflescope with a 1" maintube.   Height: ...

Vortex Sport Riflescope Rings 30mm, Extra High, Pair

Unlock your accuracy with lockdown rings built to endure centerfire recoil, the elements, and everything else you throw their way. There is no better ring to get you in the field faster or easier. Specs: Tube Size: 30mm Ring Height: Extra High Center...

Vortex Sport Riflescope Rings 30mm, Medium, Pair

Unlock your accuracy with lockdown rings built to endure centerfire recoil, the elements, and everything else you throw their way. There is no better ring to get you in the field faster or easier. Specs: Tube Size: 30mm Ring Height: Medium Center Scope...

Vortex Sport Riflescope Rings 30mm, Low, Pair

Unlock your accuracy with lockdown rings built to endure centerfire recoil, the elements, and everything else you throw their way. There is no better ring to get you in the field faster or easier. Specs: Tube Size: 30mm Ring Height: Low Center Scope...

Vortex Sport Riflescope Rings 1", Extra High, Pair

Unlock your accuracy with lockdown rings built to endure centerfire recoil, the elements, and everything else you throw their way. There is no better ring to get you in the field faster or easier. Specs: Tube Size: 1 inch Ring Height: Extra High Center...

Vortex Sport Riflescope Rings 1", High, Pair

Unlock your accuracy with lockdown rings built to endure centerfire recoil, the elements, and everything else you throw their way. There is no better ring to get you in the field faster or easier. Specs: Tube Size: 1 inch Ring Height: High Center Scope...

Vortex Sport Riflescope Rings 1", Medium, Pair

Unlock your accuracy with lockdown rings built to endure centerfire recoil, the elements, and everything else you throw their way. There is no better ring to get you in the field faster or easier. Specs: Tube Size: 1 inch Ring Height: Medium Center Scope...

Vortex Sport Riflescope Rings 1", Low, Pair

Unlock your accuracy with lockdown rings built to endure centerfire recoil, the elements, and everything else you throw their way. There is no better ring to get you in the field faster or easier. Specs: Tube Size: 1 inch Ring Height: Low Center...

Nikko Stirling Platinum Mount, 1", Weaver Style, Medium Height

Weaver-style 1" Medium Rings

Traditions 1" Detachable See-Thru Scope Rings

An ideal solution for removing your scope for easy barrel cleaning. See through rings allow the use of either scope or iron sights. Fits 1" scope tubes and Weaver style bases.

Traditions 2 Piece Scope Base, Fits Lighting & Buckhunter Rifles

2 piece blued scope base for round barrels. Fits Lighting and Buckhunter rifle models.

Talley 1" Traditions Muzzleloader Scope Mounts, High

Made in America, these Traditions Muzzleloader Scope Mounts made by Talley Manufacturing offers a unique, simplified ultra-light one-piece scope ring system for Traditions Muzzleloaders. This simplified mounting system eliminates the possibility of...

Talley 1" Traditions Muzzleloader Scope Mounts, Medium

Made in America, these Traditions Muzzleloader Scope Mounts made by Talley Manufacturing offers a unique, simplified ultra-light one-piece scope ring system for Traditions Muzzleloaders. This simplified mounting system eliminates the possibility of...

Vortex Red Dot Picatinny Mount, DeltaPoint Pro

This versatile mount lets you adapt your red dot to any firearm with a Picatinny rail, from rifles to shotguns, securing your zero for perfect accuracy in high-pressure situations.   Weight: 1oz Length: 1.83" Height: .55" Footprint: Deltapoint Pro

Talley Savage Revel Scope Mounts, 1", Low

Made in America, these Savage Revel Scope Mounts made by Talley Manufacturing offer a unique and simplified one-piece scope ring and base solution for the new Savage Revel lever action rifles. This simplified mounting system eliminates the possibility of...

Warne Maxima Ruger 10/22 Two Piece Weaver Steel, Matte, Gloss

Warne Maxima bases are molded around the popular Weaver design. The low profile of the Maxima Steel Bases give your firearm a sleek look. When used in conjunction with Warne Maxima QD Rings, the shooter is able to utilize the open sights by looking over...

Weaver Detachable Side Mount Rings,1", High

Detachable Side Mounts Experience effortless scope versatility with Weaver's Detachable Side Mounts. Designed for fast and reliable performance, these side mount brackets attach and detach in seconds, ensuring quick adaptability in the field. Available...

R & S Tool Savage Mark II, 93, Stevens Model 305 Multi-slot Base

R&S Tool Savage Mark II, 93, Stevens 305 Multi Slot Base    

Talley 1" Thompson Center Encore, Impact, Omega, Triumph and Pro Hunter, Med

Made in America, these Thompsons Center Scope Mounts made by Talley Manufacturing offers a unique, simplified ultra-light one-piece scope ring system for Thompsons Center Encore, Impact, Omega, Triumph and Pro Hunter. This simplified mounting system...

Talley Picatinny Base For Remington 700, Short Action

Made in America, Talley Manufacturing’s CVA Paramount Picatinny Rails are machined entirely from high grade 7000 series alloy and protected with a hard-coat anodizing to 65 Rockwell ensuring the craftsmanship of these Picatinny Rails last the...

Talley 34mm Talley Modern Sporting Scope Ring, High

The Talley Modern Sporting (TMS) Rings are a new solution for your Picatinny rail system with a clean and simplified appearance. These picatinny scope rings are designed to work with any rail designed to MIL-STD-1913 picatinny rail specs.  Machined...

Vortex Sport Cantilever Mount 1" - 1.5"

The 2" offset gets your head position and eye relief dialed, while leaving plenty of real estate on your rail. Lightweight, but with the power to stand up to recoil and the rigors of range day, these mounts get you shooting faster and easier, with...

Talley 1" High Rimfire Rings for 11m Dovetail, CZ 452, 455, 457, Marlin 60

Fits: CZ 452 European, 455, 457, 512 513 Steyr Zephyr Marlin 60 11mm dovetail  Height: .600″  1" tube Diameter

SPUHR TX20 TORX KEY

Torx key for all screws in the ISMS line. 45 mm stem.

SPUHR ISMS MOUNT Ø34, H38MM/1.5”, 6MIL PIC GEN3

Spuhr’s SP-4602C Unimount is an ideal option for any rifle setup intended for heavy duty applications. The SP-4602C Unimount is designed for use with high-powered optics equipped with 56mm objective lenses, 34mm main tubes, and...