Scope Mounts & Rings

SPUHR HUNTING MOUNT Ø30 H34MM/1.35” 0MIL TRG

Our new Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts.The SCT-3006 is designed for the Tikka T3X, but will also fit on the SAKO TRG 22/42, and features one classic ring and one...

SPUHR HUNTING MOUNT Ø30 H34MM/1.35” 0MIL PIC

Our new Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts.The SCP-3006 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated...

SPUHR HUNTING MOUNT Ø30 H30MM/1.18” 0MIL TRG

Our new Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts.The SCT-3001 is designed for the Tikka T3X, but will also fit on the SAKO TRG 22/42, and features one classic ring and one...

SPUHR HUNTING MOUNT Ø30 H30MM/1.18” 0MIL PIC

Our new Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts.The SCP-3001 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated as...

SPUHR HUNTING MOUNT Ø30 H25.4MM/1” 0MIL PIC

Our new Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts.The SCP-3000 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated...

SPUHR HAWK HILL CUSTOM D.O.P.E. CARD HOLDER

The Hawk Hill Custom "RMD" or Rifle Mounted Data-Holder, also known as a D.O.P.E. card holder (D.O.P.E. = Data Observed from Previous Engagements), is designed to revolutionize target data management. The flexible design with multi axis rotation allows...

SPUHR FIX IT STICKS

Fix It Sticks Spuhr-specific torque kit containing two Fix It sticks, a 18 in/lb and a 45 in/lb torque limiter, and two each of standard length and extended length Torx 20 bits.Delivered in slim soft pouch with Velcro panel and PALS.Includes an Approved...

SPUHR DOCTER/VENOM INTERFACE

Interface for attaching Docter/Noblex and Burris FastFire (1 through 4) sights to the ISMS-series scope mount. Includes screws. The A-0011 footprint also matches the following, though screw head sizing may vary: • Docter/Noblex Sight C / Sight 2+ /...

SPUHR DOCTER/VENOM HUNTING INTERFACE

Interface for attaching Docter/Noblex and Burris FastFire (1 through 4) sights to the Hunting Series mounts and rings. Includes screws.The H-0011 footprint also matches the following, though screw head sizing may vary: • Docter/Noblex Sight C /...

SPUHR DELTAPOINT INTERFACE

Interface for attaching a Leupold DeltaPoint to the scope mount. Includes screws.The A-0009 footprint also matches the following, though screw head sizing may vary: Firepoint Tasco Optima Trijicon RedDot Some Shield Mini Sight, JPoints, and US Optics...

SPUHR CANTILEVER HUNTING MOUNT Ø30 H38MM/1.5” 0MIL PIC

The Hunting Series version of the SP-3022. The SCP-3022 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated as to position the interface/accessory in either the 12-o'clock or 3-o'clock...

SPUHR BUBBLE LEVEL ASSEMBLY

External Bubble Level Assembly designed to attach forward on the scope mount body or ring. Perfect solution for shooters who are unable to focus on the built-in level in the standard ISMS series or who has a model without a built-in level.The angle of...

SPUHR ANGLED UNIVERSAL INTERFACE

Intermediary interface for attaching any of our accessory interfaces or Picatinny rails at a 20-degree angle in relation to the side of an ISMS scope mount, SICS chassis, etc. Can be mounted for left-handed use.Includes screws.Weight: 33 g/1.2 ozNote:...

SPUHR AIMPOINT T1/T2 MOUNT, LOWER 1/3, 42MM/1.65

HRT is engraved on the side as a part of a special run of mounts for FBI Hostage Rescue Team. This is the same mount as the SM-2007B, but with the HRT engraving. The worlds most rugged Aimpoint Micro/CompM5 mount. Attaches to any Picatinny or...

SPUHR AIMPOINT T-2 MOUNT H57mm/2.25″ PIC

Our new light-weight tough-as-nails formfactor!Height: 57 mm/2.25" (with Aimpoint Micro T-2/CompM5)Length: 57.5 mm/2.26"Weight: 86 g/3.0 oz Interface: Picatinny Rail Footprint: Aimpoint MicroCompatible with the A-0229 Picatinny Rail 75 mm, RD/F for use...

SPUHR AIMPOINT T-2 MOUNT H49MM/1.93″ 0MIL PIC

The worlds most rugged Aimpoint Micro/CompM5 mount. Attaches to any Picatinny or STANAG NATO rail with the use of two Tx20.Features Spuhr interfaces on the non-clamping side.Height: 49 mm/1.93" (with Aimpoint Micro T-1)Weight: 111 g/3.9 ozFits the...

SPUHR AIMPOINT T-2 MOUNT H39mm/1.53″ PIC

Our new light-weight tough-as-nails formfactor! 17 g/0.6 oz lighter than the SM-2007!   The Spuhr RD Aimpoint T-2 H39mm/1.53" Absolute Co-Witness Red Dot Picatinny Mount RD-20153 is a robust and lightweight mount designed for Aimpoint Micro series...

SPUHR AIMPOINT T-2 MAGNIFIER MOUNT H57mm/2.25″ PIC

The Spuhr Aimpoint T-2 H57mm/2.25" PIC Magnifier Mount RDF-20225K is a robust and lightweight mount designed for use with Aimpoint T-2 red dot sights and magnifiers. With a height of 57mm (2.25 inches), it provides an optimal viewing angle and alignment...

SPUHR AIMPOINT MICRO MOUNT, LOWER 1/3, 42MM/1.65” QD

The worlds most rugged Aimpoint Micro/CompM5 mount. Our unique design incorporates recoil lugs front and aft allowing for a more secure hold on the sight.Attaches to any Picatinny or STANAG NATO rail with the use of an adjustable QDP lever.Lower 1/3...

SPUHR AIMPOINT MICRO MOUNT, ABSOLUTE, 38MM/1.5” QD

Base Center Height:1.5" Fits Manufacturer:Aimpoint Mount Height:Absolute Co-Witness This Quick Detach Red Dot Mount is compatible with the following optics: Aimpoint CompM5 Aimpoint Micro H-1 Aimpoint Micro H-2 Aimpoint Micro T-1 Aimpoint Micro...

SPUHR AIMPOINT MICRO MOUNT, ABSOLUTE, 38MM/1.5

Spuhr delivers extreme durability and a wide range of customization options with the Sm-2007 Micro Mount! This mount compatible with Aimpoint's Micro Red Dots (or other red dots with the same footprint), and is perfect for flattop AR-type platforms...

SPUHR AIMPOINT MICRO MOUNT, 30MM/1.18” QD

The Spuhr Aimpoint Micro Picatinny Red Dot Mount with QDP Lever is the world's most rugged mount for Aimpoint Micro/CompM5 sights. Designed to attach to any Picatinny or STANAG NATO rail, it features an adjustable QDP lever for secure mounting. With a...

SPUHR AIMPOINT MICRO MOUNT, 30MM/1.18”

The worlds most rugged Aimpoint Micro/CompM5 mount. Attaches to any Picatinny or STANAG NATO rail with the use of two Tx20 screws.Features Spuhr interfaces on the non-clamping side.Height: 30 mm/1.18" (with Aimpoint Micro T-1. 40 mm/1.57" with Aimpoint...

SPUHR AIMPOINT MICRO MOUNT, 22MM/0.866”

The worlds most rugged Aimpoint Micro/CompM5 mount. Attaches to any Picatinny or STANAG NATO rail with the use of two Tx20 screws.Not intended for use on AR-systems as this mount will position the red dot lower than the iron sights.Height: 22 mm/0.866"...

SPUHR AIMPOINT MICRO INTERFACE, RIGHT

Interface for attaching Aimpoint Micro, HoloSun HS403, or Vortex SPARC® AR red dot sight to the right side of the ISMS scope mount (4:30-position). Includes screws.

SPUHR AIMPOINT MICRO INTERFACE, LEFT

Interface for attaching Aimpoint Micro red dot sight to the left side of the ISMS scope mount (7:30-position). The A-0025B is also suitable for: Aimpoint CompM5 Actus Core-2 1x20 Athlon Midas TSR2 Blaser RD 17 HoloSun HS403 and Paralow 403 (except the...

SPUHR Aimpoint CompM4 Mount, Absolute, H39mm/1.535″ QD

Quick detachable mount for Aimpoint Comp®M4, Absolute Co-Witness Attaches to any Picatinny or STANAG NATO rail with the use of an adjustable QDP lever.Absolute Co-witnessHeight: 39 mm/1.535"Weight: 108 g/3.8 oz   Color: Black Hardcoat...

Talley Picatinny Base for Howa 1500; Weatherby Vanguard, Long Action

Description Made in America, Talley Manufacturing’s Howa 1500 Picatinny Rails are machined entirely from high grade 7000 series alloy and protected with a hard-coat anodizing to 65 Rockwell ensuring the craftsmanship of these Picatinny Rails last...

SPUHR AIMPOINT ACRO INTERFACE

Interface for attaching the Aimpoint ACRO C-1, C-2, P-1, and P-2 red dot sights to our Hunting Series rings and mounts and to our ISMS scope mounts. Includes screws.Will also fit the Steiner MPS.Weight: 20 g/0.7 oz

SPUHR AESTHETIC MOUNT Ø30 H30MM/1.18” 0MIL TRG

Our new Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts.The SCT-3001 is designed for the Tikka T3X, but will also fit on the SAKO TRG 22/42. The SCT-3001A version features two classic...

SPUHR AESTHETIC MOUNT Ø30 H30MM/1.18” 0MIL PIC

Our new Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts.The SCP-3001 is designed for use on Picatinny rails and features two classic rings. The SCP-series of mounts can also be rotated...

SPUHR ACI INTERFACE

Interface for attaching Sniper Tools and Nightforce Angle Cosine and Angle Degree Indicators to ISMS scope mount or rings. The ACI is held in place against the A-0023 by two M3 Torx 10 screws, requiring the ACI to be attached or removed using a Torx 10...

SPUHR 7 MM LEVEL

7 mm bubble level for unimount. Rubber gaskets included (2 pcs). Note: Will not fit SR-series of rings.

SPUHR 7 MM GREEN LEVEL

7 mm green bubble level for unimount. Rubber gaskets included (2 pcs). Note: Will not fit SR-series of rings.

SPUHR 4 MM SPACER

Spacer for Spuhr Interface Height: 4 mm/.157” Weight: 7 g/0.2 oz Includes screws.

SPUHR 10 MM SPACER

Spacer for Spuhr interface. Includes screws. Height: 10 mm/.39” Weight: 14 g/0.5 oz

EOTECH COMPLETE MOUNTING HARDWARE 552/551/512/511

EOTECH Mounting Hardware Kit compatible with 511/512/551/552 Model Holographic Weapon Sights. (1) Knurled Weaver Bolt(1) Plastic Washer(1) Weaver Lock Bar(1) 7/64 Allen Wrench(1) Socket Head Mounting Bolt

TRIJICON ACOG FLATTOP MOUNT FOR MIL STD RAILS

ACOG Flattop Mount for MIL STD Rails

AIMPOINT MICRO LOW SPACER 30MM

Low Spacer for Micro™ H-2, Micro™ H-1, Micro™ T-2, Micro™ T-1 and Comp™ M5 sight models Raises height of optical axis to 30 mm

AIMPOINT MICRO SPACER 33MM

33 mm Spacer for Micro™ T-2, Micro™ T-1, Comp™ M5 sight models Raises height of optical axis to 33 mm

AIMPOINT LENS COVER, FLIP-UP, FRONT TRANSPARENT

This is a transparent lens cover made of durable rubber with snap closure and flip-up function. The cover is easy to flip up and stays in the up position until it is quickly and easily folded down manually and closes tightly with a small snap. The...

AIMPOINT LENS COVER, FLIP-UP, FRONT TRANSPARENT

This is a transparent lens cover made of durable rubber with snap closure and flip-up function. The cover is easy to flip up and stays in the up position until it is quickly and easily folded down manually and closes tightly with a small snap. The...

AIMPOINT ACRO ADAPTER RING 30MM

For mounting Acro™ series red dot sights as secondary sight on magnifying scopes with 30 mm tube 30 mm scope adapter tube ring with Acro™ interface

AIMPOINT TOOL

Universal tool for use with all Aimpoint® Hunter™ , Micro™ and Acro™ series sights, also fit the sight models Comp™ M5 and Comp™ M5s The tool's functions: It is used for windage and elevation adjustment of the sight,...

AIMPOINT SPACER, STANDARD

Standard Spacer for Comp™M4 / M4s sight models, can also be used with Comp™M3 / ML3 and PRO™ optics in conjunction with Base and Top Ring, Item No. 12194 Mount raises height of optical axis from 30 to 39 mm   Mounting...

AIMPOINT SPACER – EXTENSION

Forward extension spacer for Comp™ M4 / M4s sight models, can also be used with Comp™ M3 / ML3 and PRO™ optics in conjunction with Base and Top Ring, Item No. 12194 Spacer raises height of optical axis from 30 to 39 mm and brings...

AIMPOINT MOUNT, MICRO LRP CONVERSION KIT

Complete kit to convert Micro™ standard mount to a Lever Release Mount that fits both Weaver and Picatinny Mounting platform: Weaver / Picatinny Rail

AIMPOINT MOUNT FOR MICRO S-1

Spare part set ventilated thick rib Includes: Adjustable baseplates (C + D) Fixed base plates (03 + 04) Screws Pressure washer

AIMPOINT MOUNT FOR ACRO S-2, Thin Rib

Spare part set ventilated thin rib Rib thickness 1.3 - 2.3 mm and rib width 6 - 12 mm A + B + 01 + 02, see manual for base plate selection guide   Mounting platform: Shotgun Rib with width 6.0 - 12.0 mm and ventilated rib thickness 1.3 - 3.6...

AIMPOINT MOUNT FOR ACRO S-2, Thick Rib

Spare part set ventilated thick rib Rib thickness 2.4 - 3.6 mm and rib width 6 - 12 mm C + D + 03 + 04 see manual for base plate selection guide Mounting platform: Shotgun Rib with width 6.0 - 12.0 mm and ventilated rib thickness 1.3 - 3.6 mm

AIMPOINT MICRO SPACER 39MM

High Spacer for Micro™ H-2, Micro™ H-1, Micro™ T-2, Micro™ T-1 and Comp™ M5 sight models Raises height of optical axis to 39 mm Mounting platform: Micro Interface (Base)  

AIMPOINT MICRO SCREWS, M3, 4 PIECES

Replacement screw kit for Aimpoint® Micro™ H-2, Micro™ H-1, Micro™ T-2 and Micro™ T-1 sightsPack of 4 screws.