Scope Mounts & Rings

SPUHR AIMPOINT T1/T2 MOUNT, LOWER 1/3, 42MM/1.65

HRT is engraved on the side as a part of a special run of mounts for FBI Hostage Rescue Team. This is the same mount as the SM-2007B, but with the HRT engraving. The worlds most rugged Aimpoint Micro/CompM5 mount. Attaches to any Picatinny or...

SPUHR AIMPOINT T-2 MOUNT H57mm/2.25″ PIC

Our new light-weight tough-as-nails formfactor!Height: 57 mm/2.25" (with Aimpoint Micro T-2/CompM5)Length: 57.5 mm/2.26"Weight: 86 g/3.0 oz Interface: Picatinny Rail Footprint: Aimpoint MicroCompatible with the A-0229 Picatinny Rail 75 mm, RD/F for use...

SPUHR AIMPOINT T-2 MOUNT H49MM/1.93″ 0MIL PIC

The worlds most rugged Aimpoint Micro/CompM5 mount. Attaches to any Picatinny or STANAG NATO rail with the use of two Tx20.Features Spuhr interfaces on the non-clamping side.Height: 49 mm/1.93" (with Aimpoint Micro T-1)Weight: 111 g/3.9 ozFits the...

SPUHR AIMPOINT T-2 MOUNT H39mm/1.53″ PIC

Our new light-weight tough-as-nails formfactor! 17 g/0.6 oz lighter than the SM-2007!   The Spuhr RD Aimpoint T-2 H39mm/1.53" Absolute Co-Witness Red Dot Picatinny Mount RD-20153 is a robust and lightweight mount designed for Aimpoint Micro series...

SPUHR AIMPOINT T-2 MAGNIFIER MOUNT H39mm/1.53″ PIC

Spuhr has recently introduced an innovative accessory for firearms: the RDF – Red Dot Flip mount. This advanced mount is designed to accommodate various red dot sights, offering flexibility and precision for users. (The RDF is currently patent...

SPUHR AIMPOINT MICRO MOUNT, LOWER 1/3, 42MM/1.65” QD

The worlds most rugged Aimpoint Micro/CompM5 mount. Our unique design incorporates recoil lugs front and aft allowing for a more secure hold on the sight.Attaches to any Picatinny or STANAG NATO rail with the use of an adjustable QDP lever.Lower 1/3...

SPUHR AIMPOINT MICRO MOUNT, ABSOLUTE, 38MM/1.5” QD

Base Center Height:1.5" Fits Manufacturer:Aimpoint Mount Height:Absolute Co-Witness This Quick Detach Red Dot Mount is compatible with the following optics: Aimpoint CompM5 Aimpoint Micro H-1 Aimpoint Micro H-2 Aimpoint Micro T-1 Aimpoint Micro...

SPUHR AIMPOINT MICRO MOUNT, ABSOLUTE, 38MM/1.5

Spuhr delivers extreme durability and a wide range of customization options with the Sm-2007 Micro Mount! This mount compatible with Aimpoint's Micro Red Dots (or other red dots with the same footprint), and is perfect for flattop AR-type platforms...

SPUHR AIMPOINT MICRO MOUNT, 30MM/1.18” QD

The Spuhr Aimpoint Micro Picatinny Red Dot Mount with QDP Lever is the world's most rugged mount for Aimpoint Micro/CompM5 sights. Designed to attach to any Picatinny or STANAG NATO rail, it features an adjustable QDP lever for secure mounting. With a...

SPUHR AIMPOINT MICRO MOUNT, 30MM/1.18”

The worlds most rugged Aimpoint Micro/CompM5 mount. Attaches to any Picatinny or STANAG NATO rail with the use of two Tx20 screws.Features Spuhr interfaces on the non-clamping side.Height: 30 mm/1.18" (with Aimpoint Micro T-1. 40 mm/1.57" with Aimpoint...

SPUHR AIMPOINT MICRO MOUNT, 22MM/0.866”

The worlds most rugged Aimpoint Micro/CompM5 mount. Attaches to any Picatinny or STANAG NATO rail with the use of two Tx20 screws.Not intended for use on AR-systems as this mount will position the red dot lower than the iron sights.Height: 22 mm/0.866"...

SPUHR AIMPOINT MICRO INTERFACE, RIGHT

Interface for attaching Aimpoint Micro, HoloSun HS403, or Vortex SPARC® AR red dot sight to the right side of the ISMS scope mount (4:30-position). Includes screws.

SPUHR AIMPOINT MICRO INTERFACE, LEFT

Interface for attaching Aimpoint Micro red dot sight to the left side of the ISMS scope mount (7:30-position). The A-0025B is also suitable for: Aimpoint CompM5 Actus Core-2 1x20 Athlon Midas TSR2 Blaser RD 17 HoloSun HS403 and Paralow 403 (except the...

SPUHR Aimpoint CompM4 Mount, Absolute, H39mm/1.535″ QD

Quick detachable mount for Aimpoint Comp®M4, Absolute Co-Witness Attaches to any Picatinny or STANAG NATO rail with the use of an adjustable QDP lever.Absolute Co-witnessHeight: 39 mm/1.535"Weight: 108 g/3.8 oz   Color: Black Hardcoat...

SPUHR AIMPOINT ACRO INTERFACE

Interface for attaching the Aimpoint ACRO C-1, C-2, P-1, and P-2 red dot sights to our Hunting Series rings and mounts and to our ISMS scope mounts. Includes screws.Will also fit the Steiner MPS.Weight: 20 g/0.7 oz

SPUHR AESTHETIC MOUNT Ø30 H30MM/1.18” 0MIL TRG

Our new Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts.The SCT-3001 is designed for the Tikka T3X, but will also fit on the SAKO TRG 22/42. The SCT-3001A version features two classic...

SPUHR ACI INTERFACE

Interface for attaching Sniper Tools and Nightforce Angle Cosine and Angle Degree Indicators to ISMS scope mount or rings. The ACI is held in place against the A-0023 by two M3 Torx 10 screws, requiring the ACI to be attached or removed using a Torx 10...

SPUHR 7 MM LEVEL

7 mm bubble level for unimount. Rubber gaskets included (2 pcs). Note: Will not fit SR-series of rings.

SPUHR 7 MM GREEN LEVEL

7 mm green bubble level for unimount. Rubber gaskets included (2 pcs). Note: Will not fit SR-series of rings.

SPUHR 4 MM SPACER

Spacer for Spuhr Interface Height: 4 mm/.157” Weight: 7 g/0.2 oz Includes screws.

SPUHR 10 MM SPACER

Spacer for Spuhr interface. Includes screws. Height: 10 mm/.39” Weight: 14 g/0.5 oz

EOTECH COMPLETE MOUNTING HARDWARE 552/551/512/511

EOTECH Mounting Hardware Kit compatible with 511/512/551/552 Model Holographic Weapon Sights. (1) Knurled Weaver Bolt(1) Plastic Washer(1) Weaver Lock Bar(1) 7/64 Allen Wrench(1) Socket Head Mounting Bolt

AIMPOINT FLIPMOUNT 30MM

The Aimpoint® FlipMount™ is a quick attach/detach mount that quick and easy can be flipped in or out of the optical axis. The FlipMount™ is designed primarily for use with AIMPOINT magnifiers but can also be used to mount other...

AIMPOINT FLIP MOUNT 39MM, TWIST MOUNT BASE

The Aimpoint® FlipMount™ is a quick attach/detach mount that quick and easy can be flipped in or out of the optical axis. The FlipMount™ is designed primarily for use with AIMPOINT magnifiers but can also be used to mount other...

AIMPOINT FLIP MOUNT 39MM

The Aimpoint® FlipMount™ is a quick attach/detach mount that quick and easy can be flipped in or out of the optical axis. The FlipMount™ is designed primarily for use with AIMPOINT magnifiers but can also be used to mount other...

AIMPOINT ACRO REAR SIGHT ADAPTER GLOCK

Rear sight pistol mount plate for mounting Acro™ sights on Glock handguns without the optic ready system Installation by certified gunsmith is recommended Mounting platform: Acro Interface

AIMPOINT ACRO REAR SIGHT ADAPTER CZ SHADOW 2

Rear sight pistol mount plate for mounting Aimpoint® Acro™ red dot sights on CZ Shadow 2 handguns without the optic ready system Installation by certified gunsmith is recommended Mounting platform: Acro Interface

AIMPOINT ACRO REAR SIGHT ADAPTER CZ P-10

Rear sight pistol mount plate for mounting Acro™ sights on CZ P-10 handguns without the optic ready system Installation by certified gunsmith is recommended Mounting platform: Acro Interface

AIMPOINT ACRO MOUNT PLATE – WALTHER Q5 MATCH

Pistol adapter mount plate for mounting Acro™ sights on Optic Ready (OR) Walther Q5 Match M17 handguns Installation by certified gunsmith is recommended Mounting platform: Acro Interface

AIMPOINT ACRO MOUNT PLATE – SIG X5

Pistol adapter mount plate for mounting Acro™ sights on Optic Ready (OR) Sig Sauer X-Five handguns Installation by certified gunsmith is recommended Mounting platform: Acro Interface

AIMPOINT ACRO MOUNT PLATE – SIG P320

Pistol adapter mount plate for mounting Acro™ sights on Optic Ready (OR) Sig Sauer P320 handguns Installation by certified gunsmith is recommended Mounting platform: Acro Interface

AIMPOINT ACRO MOUNT PLATE – S&W M&P

Pistol mount plate for mounting Acro™ sights on Optic Ready (OR) Smith & Wesson M&P9 generation 1 handguns Installation by certified gunsmith is recommended Mounting platform: Acro Interface

AIMPOINT ACRO MOUNT PLATE – H&K SFP9 OR

Pistol adapter mount plate for mounting Acro™ sights on Optic Ready (OR) H & K SFP9 handguns Installation by certified gunsmith is recommended Mounting platform: Acro Interface

AIMPOINT ACRO MOUNT PLATE – GLOCK MOS

Pistol adapter mount plate for mounting Acro™ sights on Optic Ready (OR) Glock MOS handguns Installation by certified gunsmith is recommended Mounting platform: Acro Interface

AIMPOINT ACRO MOUNT PLATE – CZ SHADOW 2 OR

Pistol adapter mount plate for mounting Acro™ sights on Optic Ready (OR) CZ Shadow 2 OR handguns Installation by certified gunsmith is recommended Mounting platform: Acro Interface

AIMPOINT ACRO MOUNT PLATE – CZ P-10 C OR

Pistol adapter mount plate for mounting Acro™ sights on Optic Ready (OR) CZ P-10 C OR handguns Installation by certified gunsmith is recommended Mounting platform: Acro Interface

AIMPOINT ACRO MOUNT PLATE – BERETTA APX

Pistol adapter mount plate for mounting Acro™ sights on Optic Ready (OR) Beretta APX handguns Installation by certified gunsmith is recommended     Mounting platform: Acro Interface

AIMPOINT ACRO MED QD MOUNT 30MM

Quick Detachable Mount for Acro™ sights Fits on Weaver and Picatinny rail Raises height of optical axis to 30 mm   Mounting platform: Acro Interface (Top),Weaver / Picatinny Rail (Base)

AIMPOINT ACRO LOW QD MOUNT 22MM

Quick Detachable Mount for Acro™ sights Fits on Weaver and Picatinny rail Raises height of optical axis to 22 mm Mounting platform: Acro Interface (Top),Weaver / Picatinny Rail (Base)

AIMPOINT ACRO LOCKING BAR & THREADED SHAFT

Fits Aimpoint® Acro™ series sight models Replacement kit with shaft and bar locking

AIMPOINT ACRO AR15 QD MOUNT

Quick Detachable Mount for Acro™ sights Fits on Weaver and Picatinny rail Raises height of optical axis to 39 mm   Mounting platform: Acro Interface (Top), Weaver / Picatinny Rail (Base)

AIMPOINT ACRO ADAPTER RING 34MM

For mounting Acro™ series red dot sights as secondary sight on magnifying scopes with 34 mm tube 34 mm scope adapter tube ring with with Acro™ interface   Mounting platform: Acro Interface

AIMPOINT ACRO ADAPTER FOR RMR MOUNT

For mounting Acro™ sights on RMR interface Installation by certified gunsmith is recommended   Mounting platform: Acro Interface (Sight)

AIMPOINT ACRO ADAPTER FOR MICRO MOUNT

The Acro™ mount plate with Micro™ interface allows for compatibility with the wide range of available MICRO sight mounting solutions Installation by certified gunsmith is recommended   Mounting platform: Acro Interface (Sight),...

AIMPOINT ACRO 45° ANGLE MOUNT

Mounts on a picatinny rail. Gives the AIMPOINT ACRO sight a 45° angle. Can be mounted either to the right or to the left.

VersaRing Horizontal 30mm Scope Rings, Converts to Low, Med, High Heights

Versaring H30 Rifle Scope Rings 30mm Low, Medium, High Heights Included, Guaranteed Correct Fit, Lifetime Warranty, Patented, Fits Weaver & Picatinny   Versaring’s patented technology empowers users with the flexibility to choose between...

VersaRing Horizontal 1" Scope Rings, Converts to Low, Med, High Heights

Versaring H1 Rifle Scope Rings 1” Low, Medium, High Heights Included, Guaranteed Correct Fit, Lifetime Warranty, Patented, Fits Weaver & Picatinny   Versaring’s patented technology empowers users with the flexibility to choose...

VersaRing Vertical 1" Scope Rings, Coverts to Low, Med, High, Extra High Heights

Versaring V1 Rifle Scope Rings 1” Low, Medium, High, & Extra High Heights Included, Guaranteed Correct Fit, Lifetime Warranty, Patented, Fits Weaver & Picatinny   Versaring’s patented technology empowers users with the...

VersaRing Hinge 1" Scope Rings, Converts to Low, Med, High Heights

Versaring S1 Rifle Scope Rings 1” Low, Medium, High Heights Included, Guaranteed Correct Fit, Lifetime Warranty, Patented, Fits Weaver & Picatinny   Versaring’s patented technology empowers users with the flexibility to choose...

VersaRing Hinge 30mm Scope Rings, Converts to Low, Med, High Heights

Versaring S30 Rifle Scope Rings 30mm Low, Medium, High Heights Included, Guaranteed Correct Fit, Lifetime Warranty, Patented, Fits Weaver & Picatinny   Versaring’s patented technology empowers users with the flexibility to choose between...

Hawke 25mm Extension Match Rings, Weaver Style, 1" High

Extension Ring Precision engineered from high grade aluminium with rounded edges prevent scope damage. Model High   Ring Size (Diameter) 1 Inch   Rail Weaver   Configuration 2 piece   Fixings (Top) Double Hex...

Hawke Match Mount, Weaver Style, 30mm High

Match Ring Mounts Precision engineered from high grade aluminium with rounded edges prevent scope damage. Model High   Ring Size (Diameter) 30mm   Rail Weaver   Configuration 2 piece   Fixings (Top) Double Hex...