Tools / Supplies / Care

Kimpex Motorcycle Dolly Low Profile 1250 lbs - 000805

Easy storage of your motorcycle in a small space Supports the weight of a motorcycle up to 1250lb Corrosion resistant powder coat paint finish Heavy duty welded construction Plastic double swivel wheels Wide leg plate 13 3/4” long X 7 1/2”, can be...

Kimpex Motorcycle Rear Support - 000803

Adjusting leg plate width between 9.5” and 13.5” Includes a fork adaptor to fit swingarm with spools (Diabolos). The spools are not included. Heavy-duty construction from a 1 1/4” round steel tube with a wall of 0,08” (2.5mm) 4 big wheels providing a...

Kimpex Motorcycle Front Support - 000802

Adjusting leg plate width between 7” and 11” Pivoting rubber covered support on an oscillating arm that adjusts at every 1/4” (6,5mm) Heavy-duty construction from a 1 1/4” round steel tube with a wall of 0,08” (2.5mm) 4 big wheels providing a maximum...

Kimpex Dirt Bike Support - 000801

This portable dirt bike stand is great for use at the track, trail, shop or garage. Capacity up to 1000 lb. Comes with a gas and oil resistant non-slip rubber platform Large oil drain hole Heavy duty welded steel construction Coating with black...

Kimpex Tire Support - 000800

Front tire support holds and prevents from the tire leaving its location by locking the pivoting plate. Adjustable to fit different tire size diameter from 16" to 21" and width from 4" 1/4 to 5"1/4. Can be fixed to the trailer bed and rubber tips...

DRC/ZETA/UNIT Fork Seal Driver Replacement Adapter Set 022231 - 022231

Fork Seal Driver Replacement Adapter Set 027134Kimpex Data: Barcode: 779423044242 Supplier Number: D59-26-909Kimpex Catalog Number: 022231

Oxford Products Screen Screw - 371259

Anodised Screen Screws Includes 4mm hex keyKimpex Data: Barcode: 779420854684 Supplier Number: OX563Kimpex Catalog Number: 371259

DRC/ZETA/UNIT Aluminium Chain Cutter - 027822

Very compact chain cutter for 420 to 520 size chains. Compact design for easy storage. Chain cutter body is made of light weight aluminum. Cutting pin is made of durable Cromoly. Available in 3 anodized colors, silver, black and blue.Kimpex Data: ...

SLIME Air Compressor w/Light 300 psi - 050536

Auto, Mid-Size, SUV UPC: 716281210037 Case Qty: 2 Dims: H 7.5" x W 7" x D 3.5" Inflates Mid-Size Car Tire in 8 minutes Includes: compact 12 Volt, 300 PSI compressor, gauge, light, adaptersKimpex Data: Barcode: 779420712175 Supplier Number:...

Puig Spool Slider Black - M6 - 360504

Stand supports made in inyected nylon of high resistance to offer a greater protection in the back part of your motorbike.Kimpex Data: Barcode: 779421549077 Supplier Number: 9258NKimpex Catalog Number: 360504

DRC/ZETA/UNIT Aluminium Axle Nut - 228976

Light weight durable aluminum axle shaft nut and bolt. Made of air craft 7000 grade aluminum with anodized finish. Self lock nut design. (Except front and KTM /Husqvarna rear axle nut.) Color anodized finish, available in: blue, red, orange, green and...

DRC/ZETA/UNIT Aluminium Axle Nut - 228973

Light weight durable aluminum axle shaft nut and bolt. Made of air craft 7000 grade aluminum with anodized finish. Self lock nut design. (Except front and KTM /Husqvarna rear axle nut.) Color anodized finish, available in: blue, red, orange, green and...

Enduro Engineering Power Valve Adjusting Tool 459471 - 459471

Fine Tune your powervalve with our Billet Powervalve adjustment tool Perfect size for the tool box or Tool pack to adjust your powervalve with one simple toolKimpex Data: Barcode: 779420737109 Supplier Number: 22-2002Kimpex Catalog Number: 459471

Enduro Engineering 4 in 1 Axle Wrench 459470 - 459470

4-in-1 lightweight Billet Aluminum Axle Wrench with indexable multi tool Contains 17mm, 27mm, 30mm, 13/16" (Two Stroke Spark Plug Insert)Kimpex Data: Barcode: 779420737055 Supplier Number: 22-1023Kimpex Catalog Number: 459470

Enduro Engineering WP Fork Cap Tool 459469 - 459469

Make fork cap removal a snap on the 4CS Forks with this handy Socket.Kimpex Data: Barcode: 779420737031 Supplier Number: 22-1003Kimpex Catalog Number: 459469

Enduro Engineering Fork Cap Removal Tool 459468 - 459468

Make fork cap removal a snap on the 48mm WP Twin Chamber Fork with this handy socket.Kimpex Data: Barcode: 779420737024 Supplier Number: 22-1001Kimpex Catalog Number: 459468

Enduro Engineering WP Shock Spanner Wrench 459466 - 459466

At last a spanner wrench that makes adjusting your WP Shock a breeze Designed to adjust the spring pre-load without having to get out that damaging punchKimpex Data: Barcode: 779420735969 Supplier Number: 22-316Kimpex Catalog Number: 459466

Enduro Engineering WP Shock Spanner Wrench 459464 - 459464

At last a spanner wrench that makes adjusting your WP Shock a breeze Designed to adjust the spring pre-load without having to get out that damaging punchKimpex Data: Barcode: 779420736966 Supplier Number: 22-300Kimpex Catalog Number: 459464

Enduro Engineering 3 in 1 Axle Wrench 459463 - 459463

3-in-1 lightweight Billet Aluminum Axle Wrench with indexable multi tool Contains 24mm, 27mm, 32mmKimpex Data: Barcode: 779420736935 Supplier Number: 22-202Kimpex Catalog Number: 459463

Enduro Engineering Axle Wrench Multi 459462 - 459462

4-in-1 lightweight Billet Aluminum Axle Wrench with indexable multi tool Contains 17mm, 27mm, 32mm, 13/16 (Two Stroke Spark Plug Insert)Kimpex Data: Barcode: 779420736911 Supplier Number: 22-201Kimpex Catalog Number: 459462

Enduro Engineering Axle Wrench Multi 459461 - 459461

4-in-1 lightweight Billet Aluminum Axle Wrench with indexable multi tool Contains 17mm, 27mm, 32mm, 13/16 (Two Stroke Spark Plug Insert)Kimpex Data: Barcode: 779420736904 Supplier Number: 22-200Kimpex Catalog Number: 459461

Enduro Engineering Axle Pull Handle Insert 459460 - 459460

Makes wheel maintenance a breeze with this time saver Made of billet aluminum, this trick piece not only looks cool but is extremely handy when it comes time to change a tireKimpex Data: Barcode: 779420735952 Supplier Number: 21-016Kimpex Catalog...

DRC/ZETA/UNIT Indicateur de niveau d'huile de fourche Oil Level Gauge Oil level dipstick - 228961

Easily to extract oil with Syringe from the front fork. Easy to set oil level with oil level adjuster, one push to adjust gauge position. Aluminum syringe pipe, CNC machined push adjuster, oil resistance syringe pump body.Kimpex Data: Barcode:...

DRC/ZETA/UNIT Wire Twister 364188 - 364188

Specal wiring tool for motorcycle use Hook wire on stainless hook and rotate handle for twisting wire Make your wire twisting for grip, drain bolts and others easy Twister hook is made of stainless steel, durable and does not rustKimpex Data: Barcode:...

DRC/ZETA/UNIT Spark Plug Wrench 364185 - 364185

B type plug wrench for 2 stroke water cooled bikes Easy to use around a narrow engine head Bend angle of 10o available on both ends Equipped with frequently used 12 mmKimpex Data: Barcode: 779420891535 Supplier Number: P3801Kimpex Catalog Number: 364185

DRC/ZETA/UNIT Shock Spanner Wrench 364174 - 364174

Wrench for steering stem nut Can be used for all off-road and road bikes Precision laser cut for accurate fit on most steering stem nut 6mm thickness to access stem nut without removing top triple clamp Stem wrench to use with 3/8 drive ratchet wrench...

DRC/ZETA/UNIT Shock Spanner Wrench 364173 - 364173

Wrench for steering stem nut Can be used for all off-road and road bikes Precision laser cut for accurate fit on most steering stem nut 6mm thickness to access stem nut without removing top triple clamp Stem wrench to use with 3/8 drive ratchet wrench...

Oxford Products Bobbin & Frame Fork Black - M8 x 1.00mm - 370571

Makes fitting a rear paddock stand to your bike much easier and quicker Does not mark the bikes swingarm The majority of bikes have pre-threaded holes in their swingarms to fit bobbins (consult your bike manufacturer for the bolt and thread size...

Oxford Products Bobbin & Frame Fork Black - M8 x 1.25mm - 370570

Makes fitting a rear paddock stand to your bike much easier and quicker Does not mark the bikes swingarm The majority of bikes have pre-threaded holes in their swingarms to fit bobbins (consult your bike manufacturer for the bolt and thread size...

Oxford Products Bobbin & Frame Fork Black - M10 x 1.25mm - 370569

Makes fitting a rear paddock stand to your bike much easier and quicker Does not mark the bikes swingarm The majority of bikes have pre-threaded holes in their swingarms to fit bobbins (consult your bike manufacturer for the bolt and thread size...

Oxford Products Bobbin & Frame Fork Black - M10 x 1.50mm - 370561

Makes fitting a rear paddock stand to your bike much easier and quicker Does not mark the bikes swingarm The majority of bikes have pre-threaded holes in their swingarms to fit bobbins (consult your bike manufacturer for the bolt and thread size...

Oxford Products Bobbin & Frame Fork Black - M12 x 1.25mm - 370560

Makes fitting a rear paddock stand to your bike much easier and quicker Does not mark the bikes swingarm The majority of bikes have pre-threaded holes in their swingarms to fit bobbins (consult your bike manufacturer for the bolt and thread size...

Oxford Products Steel Paddock Stand - 469585

The durable steel construction of this front paddock stand, heavy duty fasteners and double wheels for maximum stability combine to make this an essential piece of equipment for any home mechanic. Key Features Durable steel construction Heavy duty...

Oxford Products Zero-G Stand Fork - 469583

Front lifting forks for use with Zero-G Lite, Zera-G & paddock standsKimpex Data: Barcode: 779420442973 Supplier Number: OX291Kimpex Catalog Number: 469583

Oxford Products Zero-G Bobbin Fork - 469582

Rear bobbin forks for use with Zero-G Lite, Zero-G & paddock standsKimpex Data: Barcode: 779420442966 Supplier Number: OX290Kimpex Catalog Number: 469582

Oxford Products Zero-G L-Cups - 469581

Lifting cups that fit a variety of Oxford paddock stands Square hole fitment Designed to fit under straight and flat swingarms but might not be suitable for all motorcycles - check fitment method for suitability before purchase.Kimpex Data: Barcode:...

Oxford Products Cable Repair 370521 - 370521

Used for the temporary fix of broken cables Includes 2 coils of cable and various solderless nipples Supplied in a handy aluminium storage tinKimpex Data: Barcode: 779421609702 Supplier Number: OX774Kimpex Catalog Number: 370521

Oxford Products Zero-G Dolly Stand - 469580

ZERO-G paddock stands cater for all kind of bikes - including those with single-sided swing arms - and preferences, such as a choice of fork or headstock mounted front stands. All of our paddock stands are engineered using the latest CAD technology and...

DRC/ZETA/UNIT Swing Arm Lift Stand Mini - 364081

Recommended for mini-bikes! Specially designed rear wheel maintenance stand for small wheel bikes. Suitable for bikes with wheel size 8"-12". A simple lift stand used with a side stand to lift the rear wheel. Ideal for simple maintenance such as wheel...

Oxford Products Zero-G Dolly Stand - 469579

ZERO-G paddock stands cater for all kind of bikes - including those with single-sided swing arms - and preferences, such as a choice of fork or headstock mounted front stands. All of our paddock stands are engineered using the latest CAD technology and...

Oxford Products Cable Luber Tool 370520 - 370520

Dual screw for a tighter seal Easy to use Made from strong anodised aluminumKimpex Data: Barcode: 779421609696 Supplier Number: OX773Kimpex Catalog Number: 370520

Oxford Products Zero-G Lite Stand - 469578

ZERO-G paddock stands cater for all kind of bikes - including those with single-sided swing arms - and preferences, such as a choice of fork or headstock mounted front stands. All of our paddock stands are engineered using the latest CAD technology and...

Oxford Products Zero-G Lite Stand - 469577

ZERO-G paddock stands cater for all kind of bikes - including those with single-sided swing arms - and preferences, such as a choice of fork or headstock mounted front stands. All of our paddock stands are engineered using the latest CAD technology and...

Oxford Products Zero-G Pin - 469573

Lifting pins for the ZERO-G Single Sided Paddock Stand Sold separatlyKimpex Data: Barcode: 779420442843 Supplier Number: OX275Kimpex Catalog Number: 469573

DRC/ZETA/UNIT MX Triangle Stand - 364070

Side stand, hook into rear axle Great to use MX racing bikes and bikes removed stock side stand Made of durable steel Triangle stand comes with 3 different attachments to fit most dirt bike axle shaftsKimpex Data: Barcode: 779421940010 Supplier Number:...

Oxford Products Bobbin & Frame Fork Black - M6 x 1.00mm - 370500

Makes fitting a rear paddock stand to your bike much easier and quicker Does not mark the bikes swingarm The majority of bikes have pre-threaded holes in their swingarms to fit bobbins (consult your bike manufacturer for the bolt and thread size...

Oxford Products Bobbin & Frame Fork Black - M8 x 1.25mm - 370499

Makes fitting a rear paddock stand to your bike much easier and quicker Does not mark the bikes swingarm The majority of bikes have pre-threaded holes in their swingarms to fit bobbins (consult your bike manufacturer for the bolt and thread size...

Oxford Products Zero-G Pin - 469569

Lifting pins for the ZERO-G Single Sided Paddock Stand Sold separatlyKimpex Data: Barcode: 779420442683 Supplier Number: OX271Kimpex Catalog Number: 469569

DRC/ZETA/UNIT R Stand Adjustable - 364063

Height and width adjustable sport bike stand Comes with L and U attachment Height adjustable in 5 level Can be used from a mini and a full size motorcycle Size: W500 x D570 x H265-335 (mm)Kimpex Data: Barcode: 779421882068 Supplier Number:...

Oxford Products Zero-G Single Stand - 469564

ZERO-G paddock stands cater for all kind of bikes - including those with single-sided swing arms - and preferences, such as a choice of fork or headstock mounted front stands. All of our paddock stands are engineered using the latest CAD technology and...

Oxford Products Zero-G Headstock Stand - 469563

ZERO-G paddock stands cater for all kind of bikes - including those with single-sided swing arms - and preferences, such as a choice of fork or headstock mounted front stands. All of our paddock stands are engineered using the latest CAD technology and...

Oxford Products Zero-G Stand - 469562

ZERO-G paddock stands cater for all kind of bikes - including those with single-sided swing arms - and preferences, such as a choice of fork or headstock mounted front stands. All of our paddock stands are engineered using the latest CAD technology and...