Spuhr

SPUHR Tikka T3 Scope Base, 6MIL, Extended

Picatinny Gen2 Scope Base for Tikka T3/T3x   High Quality Dehorned Scope Mount Base Based on a decade of experience designing and manufa

SPUHR DOCTER/VENOM INTERFACE

Interface for attaching Docter/Noblex and Burris FastFire (1 through 4) sights to the ISMS-series scope mount. Includes screws. The A-0011 footprint also matches the following, though screw head...

SPUHR Hunting Mount Ø30 H30MM/1.18” 0MIL TRG

Our new Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts.The SCT-3001 is designed for the Tikka T3X, but will also fit on the SAKO...

SPUHR ISMS RINGS, Ø30 H25.4MM/1” PIC

The Spuhr SR-3000 are precision-engineered scope rings designed for secure attachment of 30mm diameter riflescopes. The two-piece design allows for flexibility in positioning on Picatinny or Weaver...

SPUHR 7mm Green Level

7 mm green bubble level for unimount. Rubber gaskets included (2 pcs). Note: Will not fit SR-series of rings.

SPUHR TX20 TORX KEY

Torx key for all screws in the ISMS line. 45 mm stem.

SPUHR ISMS CANTILEVER MOUNT Ø30 H38MM/1.5” 0MIL PIC

The IDEAL SCOPE MOUNT SYSTEM series of mounts feature seven set of interfaces to attach any of more than 40 different accessories. The rings are diagonally cut for increased visibility of the...

SPUHR HUNTING MOUNT Ø34 H34MM/1.35” 0MIL PIC

Our new Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts.The SCP-4006 is designed for use on Picatinny rails and features one...

SPUHR HUNTING MOUNT Ø30 H34MM/1.35” 0MIL PIC

Our new Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts.The SCP-3006 is designed for use on Picatinny rails and features one...

SPUHR HUNTING MOUNT Ø30 H30MM/1.18” 0MIL TRG

Our new Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts.The SCT-3001 is designed for the Tikka T3X, but will also fit on the SAKO...

SPUHR HUNTING MOUNT Ø30 H25.4MM/1” 0MIL PIC

Our new Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts.The SCP-3000 is designed for use on Picatinny rails and features one...

SPUHR HAWK HILL CUSTOM D.O.P.E. CARD HOLDER

The Hawk Hill Custom "RMD" or Rifle Mounted Data-Holder, also known as a D.O.P.E. card holder (D.O.P.E. = Data Observed from Previous Engagements), is designed to revolutionize target data...

SPUHR FIX IT STICKS

Fix It Sticks Spuhr-specific torque kit containing two Fix It sticks, a 18 in/lb and a 45 in/lb torque limiter, and two each of standard length and extended length Torx 20 bits.Delivered in slim...

SPUHR DOCTER/VENOM INTERFACE

Interface for attaching Docter/Noblex and Burris FastFire (1 through 4) sights to the ISMS-series scope mount. Includes screws. The A-0011 footprint also matches the following, though screw head...

SPUHR DOCTER/VENOM HUNTING INTERFACE

Interface for attaching Docter/Noblex and Burris FastFire (1 through 4) sights to the Hunting Series mounts and rings. Includes screws.The H-0011 footprint also matches the following, though screw...

SPUHR DELTAPOINT INTERFACE

Interface for attaching a Leupold DeltaPoint to the scope mount. Includes screws.The A-0009 footprint also matches the following, though screw head sizing may vary: Firepoint Tasco Optima Trijicon...

SPUHR CANTILEVER HUNTING MOUNT Ø30 H38MM/1.5” 0MIL PIC

The Hunting Series version of the SP-3022. The SCP-3022 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated as to position the...

SPUHR BUBBLE LEVEL ASSEMBLY

External Bubble Level Assembly designed to attach forward on the scope mount body or ring. Perfect solution for shooters who are unable to focus on the built-in level in the standard ISMS series or...

SPUHR BALLISTIC ADJUSTMENT MOUNT BAM 5.56 NATO

The SM-101QD-2 BALLISTIC ADJUSTMENT MOUNT (BAM) – which is currently in use with European NATO forces – is an ambidextrous quick-detachable Aimpoint® CompM4 mount with built-in ballistic compensation...

SPUHR ANGLED UNIVERSAL INTERFACE

Intermediary interface for attaching any of our accessory interfaces or Picatinny rails at a 20-degree angle in relation to the side of an ISMS scope mount, SICS chassis, etc. Can be mounted for...

SPUHR AIMPOINT T1/T2 MOUNT, LOWER 1/3, 42MM/1.65

HRT is engraved on the side as a part of a special run of mounts for FBI Hostage Rescue Team. This is the same mount as the SM-2007B, but with the HRT engraving. The worlds most rugged...

SPUHR AIMPOINT T-2 MOUNT H57mm/2.25″ PIC

Our new light-weight tough-as-nails formfactor!Height: 57 mm/2.25" (with Aimpoint Micro T-2/CompM5)Length: 57.5 mm/2.26"Weight: 86 g/3.0 oz Interface: Picatinny Rail

SPUHR AIMPOINT T-2 MOUNT H49MM/1.93″ 0MIL PIC

The worlds most rugged Aimpoint Micro/CompM5 mount. Attaches to any Picatinny or STANAG NATO rail with the use of two Tx20.Features Spuhr interfaces on the non-clamping side.Height: 49 mm/1.93" (with...

SPUHR AIMPOINT T-2 MOUNT H39mm/1.53″ PIC

Our new light-weight tough-as-nails formfactor! 17 g/0.6 oz lighter than the SM-2007!   The Spuhr RD Aimpoint T-2 H39mm/1.53" Absolute Co-Witness Red Dot Picatinny Mount RD-20153 is a robust and...

SPUHR AIMPOINT T-2 MAGNIFIER MOUNT H57mm/2.25″ PIC

The Spuhr Aimpoint T-2 H57mm/2.25" PIC Magnifier Mount RDF-20225K is a robust and lightweight mount designed for use with Aimpoint T-2 red dot sights and magnifiers. With a height of 57mm (2.25...

SPUHR AIMPOINT T-2 MAGNIFIER MOUNT H39mm/1.53″ PIC

Spuhr has recently introduced an innovative accessory for firearms: the RDF – Red Dot Flip mount. This advanced mount is designed to accommodate various red dot sights, offering flexibility and...

SPUHR AIMPOINT MICRO MOUNT, LOWER 1/3, 42MM/1.65” QD

The worlds most rugged Aimpoint Micro/CompM5 mount. Our unique design incorporates recoil lugs front and aft allowing for a more secure hold on the sight.Attaches to any Picatinny or STANAG NATO rail...

SPUHR AIMPOINT MICRO MOUNT, ABSOLUTE, 38MM/1.5” QD

Base Center Height:1.5" Fits Manufacturer:Aimpoint Mount Height:Absolute Co-Witness This Quick Detach Red Dot Mount is compatible with the following optics: Aimpoint CompM5 Aimpoint Micro H-1<

SPUHR AIMPOINT MICRO MOUNT, ABSOLUTE, 38MM/1.5

Spuhr delivers extreme durability and a wide range of customization options with the Sm-2007 Micro Mount! This mount compatible with Aimpoint's Micro Red Dots (or other red dots with the same...

SPUHR AIMPOINT MICRO MOUNT, 30MM/1.18” QD

The Spuhr Aimpoint Micro Picatinny Red Dot Mount with QDP Lever is the world's most rugged mount for Aimpoint Micro/CompM5 sights. Designed to attach to any Picatinny or STANAG NATO rail, it...

SPUHR AIMPOINT MICRO MOUNT, 30MM/1.18”

The worlds most rugged Aimpoint Micro/CompM5 mount. Attaches to any Picatinny or STANAG NATO rail with the use of two Tx20 screws.Features Spuhr interfaces on the non-clamping side.Height: 30 mm/1...

SPUHR AIMPOINT MICRO INTERFACE, RIGHT

Interface for attaching Aimpoint Micro, HoloSun HS403, or Vortex SPARC® AR red dot sight to the right side of the ISMS scope mount (4:30-position). Includes screws.

SPUHR AIMPOINT MICRO INTERFACE, LEFT

Interface for attaching Aimpoint Micro red dot sight to the left side of the ISMS scope mount (7:30-position). The A-0025B is also suitable for: Aimpoint CompM5 Actus Core-2 1x20 Athlon Midas...

SPUHR Aimpoint CompM4 Mount, Absolute, H39mm/1.535″ QD

Quick detachable mount for Aimpoint Comp®M4, Absolute Co-Witness Attaches to any Picatinny or STANAG NATO rail with the use of an adjustable QDP lever.Absolute Co-witnessHeight: 39 mm/1.535"Weight:...

SPUHR AIMPOINT ACRO INTERFACE

Interface for attaching the Aimpoint ACRO C-1, C-2, P-1, and P-2 red dot sights to our Hunting Series rings and mounts and to our ISMS scope mounts. Includes screws.Will also fit the Steiner MPS...

SPUHR AESTHETIC MOUNT Ø30 H30MM/1.18” 0MIL TRG

Our new Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts.The SCT-3001 is designed for the Tikka T3X, but will also fit on the SAKO...

SPUHR 7 MM GREEN LEVEL

7 mm green bubble level for unimount. Rubber gaskets included (2 pcs). Note: Will not fit SR-series of rings.

SPUHR 4 MM SPACER

Spacer for Spuhr Interface Height: 4 mm/.157” Weight: 7 g/0.2 oz Includes screws.