Drive / Transmission

TrakMotive Complete Axle Fits Kawasaki - 216087

Handles up to 20% more torque than OE axles (torque measured at axle breakage during testing) Heat treated chrome steel solid center shaft High quality neoprene (CR rubber) dust boots (greater flexibility as well as heat and chemical resistance than...

EPI Clutch Kit - Sport Utility Fits Yamaha - N/A - 295595

Our best all around use kit Great for trail riding, occasional mud and sand riding, plowing and hauling Better low end and midrange acceleration Quicker backshift which results in crisp throttle response Reduces belt slip and clutch heatKimpex Data: ...

All Balls Ball Joint - 206186

Ball joints feature heavy duty steel housings and a POM-M90 bearing cup to isolate the ball end from the steel housing for longer life.Kimpex Data: Barcode: 779420714117 Supplier Number: 42-1016Kimpex Catalog Number: 206186

All Balls Ball Joint - 206185

Ball joints feature heavy duty steel housings and a POM-M90 bearing cup to isolate the ball end from the steel housing for longer life.Kimpex Data: Barcode: 779420714100 Supplier Number: 42-1015Kimpex Catalog Number: 206185

Hot Rods Output Shaft Repair Kit - 164059

A quick solution to repairing a leaking counter shaft seal in one complete kit Includes Hot Rods countershaft seal, counter shaft bushing, O-rings, and lock washer (when applicable) Does not include water pump or transmission bearings Kimpex Data: ...

TrakMotive Complete Axle Fits Kawasaki - 216086

Handles up to 20% more torque than OE axles (torque measured at axle breakage during testing) Heat treated chrome steel solid center shaft High quality neoprene (CR rubber) dust boots (greater flexibility as well as heat and chemical resistance than...

All Balls Ball Joint - 206183

Ball joints feature heavy duty steel housings and a POM-M90 bearing cup to isolate the ball end from the steel housing for longer life.Kimpex Data: Barcode: 779420714087 Supplier Number: 42-1009Kimpex Catalog Number: 206183

TrakMotive Complete Axle Fits Kawasaki - 216085

Handles up to 20% more torque than OE axles (torque measured at axle breakage during testing) Heat treated chrome steel solid center shaft High quality neoprene (CR rubber) dust boots (greater flexibility as well as heat and chemical resistance than...

RUGGED Wheel Bearing Fits Can-am, Fits CFMoto, Fits Kawasaki - 296850

Rugged wheel bearing is made from heavy duty steel with double material sealing design (Rubber and Steel) to improve the dust and mud resistance. Steel Shielded and rubber sealed for optimal dust and mud resistance. Injected with high...

Kimpex HD Ball Joint Kit - 326895

Heavy duty replacement part. Refer to the chart to find your model.Kimpex Data: Barcode: 779420805020 Supplier Number: 42-1039-KIMPKimpex Catalog Number: 326895

TrakMotive Complete Axle Fits Kawasaki - 216084

Handles up to 20% more torque than OE axles (torque measured at axle breakage during testing) Heat treated chrome steel solid center shaft High quality neoprene (CR rubber) dust boots (greater flexibility as well as heat and chemical resistance than...

RUGGED Wheel Bearing Fits Arctic cat, Fits CFMoto, Fits Kawasaki, Fits Kymco, Fits Yamaha - 296849

Rugged wheel bearing is made from heavy duty steel with double material sealing design (Rubber and Steel) to improve the dust and mud resistance. Steel Shielded and rubber sealed for optimal dust and mud resistance. Injected with high...

EPI Clutch Kit - Mudder - 28"+ Tires Fits Can-am - N/A - 295584

Designed for machines with 28" or larger tires Helps restore power loss due to addition of larger tires Allows for easier turning of larger tires in the mud Better low end power and torque Quicker backshift which results in crisp throttle...

Kimpex HD Ball Joint Kit - 326894

Heavy duty replacement part. Refer to the chart to find your model.Kimpex Data: Barcode: 779420805037 Supplier Number: 42-1038-KIMPKimpex Catalog Number: 326894

TrakMotive Complete Axle Fits Kawasaki - 216083

Handles up to 20% more torque than OE axles (torque measured at axle breakage during testing) Heat treated chrome steel solid center shaft High quality neoprene (CR rubber) dust boots (greater flexibility as well as heat and chemical resistance than...

EPI Clutch Kit - Mudder - 28"+ Tires Fits Can-am - N/A - 295579

Designed for machines with 28" or larger tires Helps restore power loss due to addition of larger tires Allows for easier turning of larger tires in the mud Better low end power and torque Quicker backshift which results in crisp throttle...

TrakMotive Complete Axle Fits Kawasaki - 216082

Handles up to 20% more torque than OE axles (torque measured at axle breakage during testing) Heat treated chrome steel solid center shaft High quality neoprene (CR rubber) dust boots (greater flexibility as well as heat and chemical resistance than...

Shindy One Way Clutch Bearing N/A - 212248

Manufactured by the same O.E. manufacturer as the OEM parts. Made in Japan using highest quality components. Cam-clutch type bearings are made with precision to create even pressure from momentum of centrifugal force during use, making smooth engine...

EPI Ball Joint Kit - 394624

Excellent quality replacement part. Ball joint includes ball joint, rubber boot, snap ring and cotter pin. Ball joint kit includes upper and lower ball joints for one side, rubber boot, snap ring and cotter pin. Components vary by modelKimpex Data: ...

TrakMotive Complete Axle Fits Kawasaki - 216081

Handles up to 20% more torque than OE axles (torque measured at axle breakage during testing) Heat treated chrome steel solid center shaft High quality neoprene (CR rubber) dust boots (greater flexibility as well as heat and chemical resistance than...

Kimpex HD Wheel Bearing & Seal Kit Fits Polaris - 326887

Kimpex high-speed bearings are manufactured to ABEC 3 precision levels. Triple lip rubber seals keep the grease in and the water and dirt out. Chevron SRI 2 grease contains rust and oxidation inhibitors (-29° C – 177° C). Double lip type TC seals with...

CVTech Trailbloc Drive Pulley Fits Can-am - ATV - 394621

Trailbloc is the perfect solution adapted for today’s ATV and UTV’s needs. Thanks to the many advantages of the Trailbloc all ATV and UTV enthusiasts can ride with a peaceful mind. The Trailbloc pulley is a very compact design giving high performance. ...

TrakMotive Complete Axle Fits Kawasaki - 216080

Handles up to 20% more torque than OE axles (torque measured at axle breakage during testing) Heat treated chrome steel solid center shaft High quality neoprene (CR rubber) dust boots (greater flexibility as well as heat and chemical resistance than...

Kimpex CV Joint Kit Front outer, Rear outer - 058758

Kit Breakdown: 1 Bearing 2 Clamps 1 Sealing boot CV Joint 1 Grease pack 1 Snap ring Refer to the chart to find your model position.Kimpex Data: Barcode: 779420491506 Supplier Number: PACV-1009SETKimpex Catalog Number: 058758

EPI Clutch Kit - Mudder - 28"+ Tires Fits Polaris - N/A - 295516

Designed for machines with 28" or larger tires Helps restore power loss due to addition of larger tires Allows for easier turning of larger tires in the mud Better low end power and torque Quicker backshift which results in crisp throttle...

TrakMotive Complete Axle Fits Kawasaki - 216079

Handles up to 20% more torque than OE axles (torque measured at axle breakage during testing) Heat treated chrome steel solid center shaft High quality neoprene (CR rubber) dust boots (greater flexibility as well as heat and chemical resistance than...

Kimpex Universal Joint - 058756

Snap rings included 3 possible locations for zerk depending on models (center, end or corner) Some do not have any Zerk. In order to know the exact position of every joint made for your ATV model, refer to the chart in Kimpex ATV & UTV catalogue online...

TrakMotive Complete Axle Fits Honda - 216078

Handles up to 20% more torque than OE axles (torque measured at axle breakage during testing) Heat treated chrome steel solid center shaft High quality neoprene (CR rubber) dust boots (greater flexibility as well as heat and chemical resistance than...

TrakMotive Complete Axle Fits Honda - 216077

Handles up to 20% more torque than OE axles (torque measured at axle breakage during testing) Heat treated chrome steel solid center shaft High quality neoprene (CR rubber) dust boots (greater flexibility as well as heat and chemical resistance than...

EPI Clutch Kit - Mudder - 28"+ Tires Fits Kawasaki - N/A - 295511

Designed for machines with 28" or larger tires Helps restore power loss due to addition of larger tires Allows for easier turning of larger tires in the mud Better low end power and torque Quicker backshift which results in crisp throttle...

Super ATV Propeller Shaft - U-Series Rhino Driveline - 315649

Stronger than Stock! Rhino Driveline Prop Shafts are the only prop shafts that are strong enough to handle every ounce of power your vehicle can put out. Maximized shafts and smarter U-joints mean it can withstand tons of torque whether you’re out on...

Kimpex CV Boot Kit - 058711

Catch the problem early Replace boots with high quality replacements inexpensively before replacing expensive CV’s Each boot kit includes boot, 2 clamps & 2 oz grease pack One boot per kit HDS = Visco Lok system Exc HDS = Excludes Visco Lok System The...

TrakMotive Complete Axle Fits Honda - 216076

Handles up to 20% more torque than OE axles (torque measured at axle breakage during testing) Heat treated chrome steel solid center shaft High quality neoprene (CR rubber) dust boots (greater flexibility as well as heat and chemical resistance than...

TrakMotive Complete Axle Fits Honda - 216075

Handles up to 20% more torque than OE axles (torque measured at axle breakage during testing) Heat treated chrome steel solid center shaft High quality neoprene (CR rubber) dust boots (greater flexibility as well as heat and chemical resistance than...

EPI Clutch Kit - Sport Utility Fits Polaris - N/A - 295504

Our best all around use kit Great for trail riding, occasional mud and sand riding, plowing and hauling Better low end and midrange acceleration Quicker backshift which results in crisp throttle response Reduces belt slip and clutch heatKimpex Data: ...

CVTech Trailbloc Drive Pulley Fits Can-am - ATV - 394597

Trailbloc is the perfect solution adapted for today’s ATV and UTV’s needs. Thanks to the many advantages of the Trailbloc all ATV and UTV enthusiasts can ride with a peaceful mind. The Trailbloc pulley is a very compact design giving high performance. ...

TrakMotive Complete Axle Fits Honda - 216074

Handles up to 20% more torque than OE axles (torque measured at axle breakage during testing) Heat treated chrome steel solid center shaft High quality neoprene (CR rubber) dust boots (greater flexibility as well as heat and chemical resistance than...

TrakMotive Complete Axle Fits Honda - 216073

Handles up to 20% more torque than OE axles (torque measured at axle breakage during testing) Heat treated chrome steel solid center shaft High quality neoprene (CR rubber) dust boots (greater flexibility as well as heat and chemical resistance than...

EPI Clutch Kit - Sport Utility Fits Kawasaki - N/A - 295501

Our best all around use kit Great for trail riding, occasional mud and sand riding, plowing and hauling Better low end and midrange acceleration Quicker backshift which results in crisp throttle response Reduces belt slip and clutch heatKimpex Data: ...

EPI CV Boot Single Kit - 394590

Single boot kits include: 1 CV boot, 2 clamps and grease High quality replacement part *Refer to the chart to find your model position.Kimpex Data: Barcode: 779421842352 Supplier Number: WE130177Kimpex Catalog Number: 394590

TrakMotive Complete Axle Fits Honda - 216072

Handles up to 20% more torque than OE axles (torque measured at axle breakage during testing) Heat treated chrome steel solid center shaft High quality neoprene (CR rubber) dust boots (greater flexibility as well as heat and chemical resistance than...

EPI Pro-Series Extreme Roller Kit - 394579

Made with Fibermaxx2, which is a proprietary EPI material that uses the latest technology to combine a self lubricating polymer with wear resisten fibers. While developing this new material we found that it greatly outlasted the competitors rollers...

Kimpex CV Boot Kit - 058703

Catch the problem early Replace boots with high quality replacements inexpensively before replacing expensive CV’s Each boot kit includes boot, 2 clamps & 2 oz grease pack One boot per kit HDS = Visco Lok system Exc HDS = Excludes Visco Lok System The...

TrakMotive Complete Axle Fits Honda - 216071

Handles up to 20% more torque than OE axles (torque measured at axle breakage during testing) Heat treated chrome steel solid center shaft High quality neoprene (CR rubber) dust boots (greater flexibility as well as heat and chemical resistance than...

EPI Clutch Kit - Sport Utility Fits Polaris - N/A - 295494

Our best all around use kit Great for trail riding, occasional mud and sand riding, plowing and hauling Better low end and midrange acceleration Quicker backshift which results in crisp throttle response Reduces belt slip and clutch heatKimpex Data: ...

Kimpex Complete Axle Fits Can-am - 416792

Kimpex is proud to present our newest line of superior ATV/Powersports axles. Our partnership with customers and suppliers has resulted in the development and production of the highest quality, Standard, Heavy-duty, and Specialty Customized Axles...

EPI Secondary Clutch Rebuild Kit Fits Can-am - 394578

New and improved Clutch Rebuild Kit. Rebuild your secondary clutch “completely” with one kit. Kit components vary by model. Kits usually include: Rollers or buttons, cover bushings, moveable bushing, screws or bolts, & snap ring.Kimpex Data: Barcode:...

TrakMotive Complete Axle Fits Honda - 216070

Handles up to 20% more torque than OE axles (torque measured at axle breakage during testing) Heat treated chrome steel solid center shaft High quality neoprene (CR rubber) dust boots (greater flexibility as well as heat and chemical resistance than...

Kimpex CV Boot Kit - 058702

Catch the problem early Replace boots with high quality replacements inexpensively before replacing expensive CV’s Each boot kit includes boot, 2 clamps & 2 oz grease pack One boot per kit HDS = Visco Lok system Exc HDS = Excludes Visco Lok System The...

TrakMotive Complete Axle Fits Honda - 216069

Handles up to 20% more torque than OE axles (torque measured at axle breakage during testing) Heat treated chrome steel solid center shaft High quality neoprene (CR rubber) dust boots (greater flexibility as well as heat and chemical resistance than...

CVTech Trailbloc Drive Pulley Fits Can-am - ATV - 394576

Trailbloc is the perfect solution adapted for today’s ATV and UTV’s needs. Thanks to the many advantages of the Trailbloc all ATV and UTV enthusiasts can ride with a peaceful mind. The Trailbloc pulley is a very compact design giving high performance. ...

TrakMotive Complete Axle Fits Can-am - 216068

Handles up to 20% more torque than OE axles (torque measured at axle breakage during testing) Heat treated chrome steel solid center shaft High quality neoprene (CR rubber) dust boots (greater flexibility as well as heat and chemical resistance than...