Equipment & Supplies

RCBS Powder Funnel for .17 to .20 Cal

RCBS has improved upon even the basic plastic funnel. It features a specially designed drop tube to avoid any messy powder spills around case mouths, a non-stick, anti-static surface, and a square lip to keep the funnel from rolling around. Spout will...

Hornady Cartridge Gauge for 22 Arc (.224)

There are over 60 different modified cases available to use with Hornady Lock-N-Load Gauge. Hornady will make custom cartridges for those not listed. Details are available in the instructions. Modified cases will not work in tight neck chambers, except...

Hornady Series 1 Full Length Die, 22 Arc (.224)

Hornady Full Length Die for 22 Arc (.224) "Hybrid Technology" combines the proven performance of a soft case with the added protection of fiber reinforced sidewalls. 2 1/2" total soft padding. Full-length zipper with pull. Deluxe soft Tricot inner...

Lyman Mag 25 Digital Furnace, 115V

Designed for the high volume bullet caster, the Mag 25 offers an array of features not found on any other furnace. With 850 watts of power, the furnace is quick to heat up, even with the increased capacity. The digital display on the front panel shows...

RCBS Stainless Steel Dial Caliper

Hardened stainless steel construction. Matte, non-glare finish. Range 0-6-inch. 0.100-inch direct reading per revolution. 0.001-inch graduations. Accurate to +/- 0.001-inch. Four-way measurement capability: inside, outside, depth and step. Shockproof...

Lyman Primer Pocket Uniform, Small

This precision tool allows hand reloaders to produce a uniform primer depth for more consistent ignition and improves accuracy. Uniforming tool has a pre-set stop collar set to SAAMI specs. Reloader simply inserts and turns. Available in large and small...

Hornady Shell Holder #24, 7.65 Belgian

Precision machined from solid steel and heat-treated to perform flawlessly. Wide mouth and rounded edge at the opening allow smoother case insertion. Hornady steel shell holders also fit most other brands of reloading presses. Caliber: 7.65 Belgian

Hornady Case Trimmer Pilot #2, .228

The Hornady pilot is used for trimming caliber specific brass cases in the Hornady Cam-Lock Case Trimmer or the Hornady Case Trimmer. Pilot #2 Fits:  .228 diameter  

Hornady Case Trimmer Pilot #8, .300

The Hornady pilot is used for trimming caliber specific brass cases in the Hornady Cam-Lock Case Trimmer or the Hornady Case Trimmer. Pilot #8 Fits: .300 Diameter

RCBS Powder Die

The RCBS Powder Die allows the Case Activated Powder Measure (CAPM) to be quickly moved from one Die Plate to another. Allows Case Activated Powder Measure (CAPM) to be quickly moved from one Die Plate to...

RCBS Trim Pro Case Trimmer Cutter .50 Cal

This high-quality replacement cutter is designed for use with RCBS Trim Pro case trimmers. Product 9364 is replacement Trimmer Cutter, 50 cal. 9364 is a 50 Caliber Replacement cutter designed to fit on the High-Capacity case trimmer

Hornady Neck Turning Mandrel for 20 Cal/ .2010"

Hornady 20 Cal .2010 Neck Turn Mandrel - This mandrel is designed to work with the Hornady Neck Turning Tool. Assures Casese Are Properly Alligned     

Hornady Neck Turn Mandrel for 17 Cal / .1720"

Hornady 17 Caliber .1720 Neck Turn Mandrel - This mandrel is designed to work with the Hornady Neck Turning Tool. Assures Casese Are Properly Alligned 

RCBS Replacement Pow'r Pull Impact Bullet Puller Standard Chuck Assembly

Designed for use with the RCBS Pow'r Pull, these three available case-holding chucks will accommodate a range of cases. Replacement Chucks for Pow'r Pull Bullet Puller Aluminum Construction Limited Lifetime Warranty

Hornady Shell Holder #52, (338 Marlin Express)

Precision machined from solid steel then heat treated to perform flawlessly for the life of the press. They fit all other Hornady accessories including the Hornady Cam-Lock Case Trimmer and Hand-Held Priming Tool. These shellholders will also fit the...

Hornady Case Trimmer Pilot #14, .348

The Hornady pilot is used for trimming caliber specific brass cases in the Hornady Cam-Lock Case Trimmer or the Hornady Case Trimmer. Pilot #14 Fits:  .348 diameter  

Hornady Case Trimmer Pilot #13, .338

The Hornady pilot is used for trimming caliber specific brass cases in the Hornady Cam-Lock Case Trimmer or the Hornady Case Trimmer. Pilot #13 Fits: .338 Diameter

MTM Fliptop Large Rifle Belt Style Green Ammo Can, 20 Rounds

The MTM Case-Gard Belt Carrier Series of rifle ammo boxes are a favorite among hunters and shooters throughout the world. The Belt Carrier Series is designed with Snap-Lok top lid, rounded edges, and a non textured surface. These cases are made of a...

Hornady Shell Holder #25

10.3x60R Swiss/348 Winchester/500 Linebaugh/50 Alaskan

Hornady Lock-N-Load 22 ARC, Modified Case

Hornady has been making quality reloading equipment and components for over sixty years. The Lock-N-Load Overall Length Gage Modified Cases are no exception. These gages are needed to measure the bullet relationship to the lands of a barrel when being...

Hornady Series 1, 2-Die Set , 22 ARC (.224)

Full-length die set includes full-length size die, seating die and expander assembly.

Hornady Series Ii 2- Die Set, 8.5X55 Blaser (.338)

Full-length die set includes full-length size die, seating die and expander assembly.

Hornady Lock-N-Load Quick Change Hand Tool

The ergonomic Lock-N-Load Quick Change Hand Tool features a dual-sided chuck that allows for the quick changeover of popular case preparation tools like chamfer, deburr, primer pocket reamers and cleaners, brushes or other tools with 8-32 threads...

Lyman E-ZEE FLO Universal Powder Trickler

The first powder Trickler that works with any reloading scale, mechanical or electronic. Lyman's E-ZEE-FLO accessory powder Trickler features an adjustable base that adapts to even that highest scale platform. Powder Trickler tube has an extension that...

Frankford Hinge-Top Ammo Box #503, 38/357, 50 CT

HIGH-DENSITY POLYMER CONSTRUCTION FOR MAXIMUM DURABILITY NEW HINGE-TOP DESIGN PREVENTS LID FROM INADVERTENTLY CLOSING; EXTENDS THE LIFE OF THE AMMO BOX TOP OF THE BOX IS SIZED FOR 1" X 2 5/8" I.D. PRINTER LABELS

Lyman VLD Chamfer/Reamer

Works great for any long boat tail bullet design. For many years, the Lyman VLD Chamfer/ Reamer has been extremely popular with reloaders due to its gentle 22 degree cutting angle. It cuts much easier than standard 45 degree angle reamers and works great...

Lyman Flash Hole Uniformer Tool

This handy tool removes internal flash hole burrs. Features a tool steel cutter which is inserted into the flash hole through the case neck. Adjustable stop collar allows use with any size case. Burrs are removed with a clockwise turn...

Lyman Case Care Kit

This kit contains many of Lyman's most popular case prep tools and is designed to make each of the case prep functions easier with the handy crank.   Kit can be used for: Outside Deburring:  Removes burrs and bevels the outside edge of the...

MTM Case-Gard Ammo Box 50 Round Flip-Top 40 10mm 45 ACP, Clear-Blue

These flip top boxes are available in five sizes to accommodate any type of handgun ammo. They have an easy to grip, scuff-resistant textured surface and are stackable. The Snap-Lok latch and full length mechanical hinge are guaranteed for 25 years.ibers...

Lyman Handgun Cartridge Checker

AMMO CHECKERS CHECK THE QUALITY AND CONSISTENCY OF BOTH RELOADED ROUNDS AND PURCHASED AMMUNITION. MACHINED FROM SOLID BLOCKS OF 6061 T6 AIRCRAFT GRADE ALUMINUM. CUT WITH CUSTOM TOOLING TO SAAMI MINIMUM CHAMBER DIMENSIONS. JUST DROP YOUR LOADED ROUNDS IN...

Lee BL Pro Shell Plate #19

Lee Load-Master progressive 5-hole reloading kit for 44 Special/44 Magnum. Includes dies (Full Length Size, Powder Through Expanding and Bullet Seating Dies), Turret, #11L Shell Plate, Pro Auto-Disk Powder Measure, Universal Case Feeder and Large...

MTM Case-Gard Ammo Box 100 Round Flip-Top 9mm 380 ACP, Clear/Red

The Case-Gard P-100's are the perfect ammo carrier for the handgunner who wants to spend several hours at the range. Ideal for storing reloads. They have an easy to grip, scuff-resistant textured surface and are stackable. The Snap-Lok latch and full...

MTM Case-Gard Ammo Box 100 Round Flip-Top 40 10mm 45 ACP, Clear/Blue

The Case-Gard P-100's are the perfect ammo carrier for the handgunner who wants to spend several hours at the range. Ideal for storing reloads. They have an easy to grip, scuff-resistant textured surface and are stackable. The Snap-Lok latch and full...

MTM Case-Gard Ammo Box 100 Round Flip Top For 22 Mag - 17 HMR, Clear-Red

Designed for great afternoon of varmint or competitive shooting. Made of virtually indestructible polypropylene that will not warp, crack, chip, peel, expand or contract, MTM CASE-GARD rifle ammunition cases are still the first choice of rifle...

Lyman Primer Pocket Large Cleaner

Cleans fouling from primer pocket bottoms. Molded handle included. Available in large or small sizes. For improved accuracy and safety, make sure that your primers are completely seated with Lyman’s Primer Pocket Cleaner...

MTM Slip-Top Ammo Box 30-30, Clear Red, 20 Rounds

25 / 270 / 300 / 325 / 338 / 7mm WSM, 30 Rem, 300 / 7mm Rem. SAUM, 300 / 338 RCM, 348 / 356 / 375 / 38-56 / 40-65 Win., 375 Rimless 2 ¼”, 376 Steyr, 38-55 Ballard, 45-70 Govt., 40-82 / 45-90 / 348 WCF, 40-60 / 450 Marlin, 460 / 500 S&W...

Hornady Die Set 3, 380 Auto (.355)

Hornady Die Set 3 for .380 Auto (.355")

Lyman E-Zee Prime Hand Priming Tool

The system works with any popular brand of standard shellholder and allows instant changeover between primer sizes. Includes two primer trays, each of which incorporate their own built-in large or small primer punch assembly. There are no small...

RCBS Case Lube Kit

Properly clean and lube cases for resizing the simple way with this complete kit. It includes the RCBS Case Lube Pad, a 2-ounce bottle of Case Lube—2 and two interchangeable Case Neck Brushes for 22 through 30 caliber.

Hornady Primer Pocket Reamer Kit, Small

The Hornady Primer Pocket Reamer Cutter head quickly removes the military crimp from primer pockets with this handy tool.

RCBS Primer Pocket Brush, Combo

A build-up of residue in primer pockets can cause misfires. A couple of twists with the RCBS Primer Pocket Brush easily cleans out residue. Removes residue in primer pockets with couple of twists Stainless bristles and interchangeable mounts for...

Lyman Turbo Tufnut Media, 3 Lb

Turbo Tufnut Plus Media Lyman Case Cleaning Media is the most effective choice for cleaning dirty and tarnished cases. A few hours in a Lyman Turbo Tumbler cases are clean, polished and ready for reloading. Rouge Bearing Nutshell.

Lyman Corncob Media Green #2, 2 Lb

Lyman Turbo Case Cleaning Media: the media designed for your Lyman tumbler. Lyman Case Cleaning Media is the most effective choice for cleaning dirty and tarnished cases. A few hours in a Lyman Turbo Tumbler and the cases will be clean, polished and...

Hornady Lock-N-Load Modified Case, 28 Nosler

Hornady has been making quality reloading equipment and components for over sixty years. The Lock-N-Load Overall Length Gage Modified Cases are no exception. These gages are needed to measure the bullet relationship to the lands of a barrel when being...

Hornady Shell Holder #54, 450 Nitro Express

Precision machined from solid steel then heat treated to perform flawlessly for the life of the press. They fit all other Hornady accessories including the Hornady Cam-Lock Case Trimmer and Hand-Held Priming Tool. These shellholders will also fit the...

RCBS Quick Change Powder Measure

The RCBS Quick Change Powder Measure can quickly go from light pistol to magnum rifle charges. The hopper hold 1 pound of smokeless powder. The unit features metering assemblies that change out with the pull of a pin. Extra metering assemblies can...

Hornady Digital Case & Parts Dryer

Dry hundreds of cartridge cases — as well as small and large gun parts — at the same time with the revolutionary Digital Cases & Parts Dryer. With an innovative top-mounted digital powerhead, cartridge cases and gun parts dry thoroughly...

RCBS Automatic Bench Priming Tool

The Automatic Priming Tool is fast, accurate and highly sensitive due to a unique single-stage lever system. Primers feed through the auto primer feed tube one by one, preventing potential contamination by oily fingers. Two primer rod assemblies and two...

Lyman Universal Trimmer w/9 Pilot Multi-Pack

Lyman's Universal Trimmer features the patented Universal Chuckhead which handles any case from .17 caliber to .458. No costly collets required! Features coarse and fine adjustments. Adjusting ring lets you "dial in to an approximate setting for quick...

Frankford Arsenal Rotary Tumbler Lite, 110V CP=2

The Frankford Arsenal Rotary Case Tumbler Lite is the compact version of the Platinum Series Rotary Tumbler. This tumbler can hold up to 300 pieces of .223 brass. The Rotary Tumbler Lite is especially great for reloading specialty cartridges and lower...

Hornady Lock-N-Load Quick Change Hand Tool

The ergonomic Lock-N-Load Quick Change Hand Tool features a dual-sided chuck that allows for the quick changeover of popular case preparation tools like chamfer, deburr, primer pocket reamers and cleaners, brushes or other tools with 8-32 threads...

RCBS Universal Hand Priming Tool

The Universal Hand Priming Tool features a universal case holder. The case holder can accept cases from .32 ACP to .45-70 Government. A safety gate isolates the primer seating operation from the primer supply. The removable primer tray orients the...