Equipment & Supplies

RCBS Powder Funnel for .17 to .20 Cal

RCBS has improved upon even the basic plastic funnel. It features a specially designed drop tube to avoid any messy powder spills around case mouths, a non-stick, anti-static surface, and a square lip to keep the funnel from rolling around. Spout will...

Lyman Mag 25 Digital Furnace, 115V

Designed for the high volume bullet caster, the Mag 25 offers an array of features not found on any other furnace. With 850 watts of power, the furnace is quick to heat up, even with the increased capacity. The digital display on the front panel shows...

RCBS Stainless Steel Dial Caliper

Hardened stainless steel construction. Matte, non-glare finish. Range 0-6-inch. 0.100-inch direct reading per revolution. 0.001-inch graduations. Accurate to +/- 0.001-inch. Four-way measurement capability: inside, outside, depth and step. Shockproof...

Lyman Primer Pocket Uniform, Small

This precision tool allows hand reloaders to produce a uniform primer depth for more consistent ignition and improves accuracy. Uniforming tool has a pre-set stop collar set to SAAMI specs. Reloader simply inserts and turns. Available in large and small...

Hornady Shell Holder #24, 7.65 Belgian

Precision machined from solid steel and heat-treated to perform flawlessly. Wide mouth and rounded edge at the opening allow smoother case insertion. Hornady steel shell holders also fit most other brands of reloading presses. Caliber: 7.65 Belgian

Hornady Case Trimmer Pilot #2, .228

The Hornady pilot is used for trimming caliber specific brass cases in the Hornady Cam-Lock Case Trimmer or the Hornady Case Trimmer. Pilot #2 Fits:  .228 diameter  

Hornady Case Trimmer Pilot #8, .300

The Hornady pilot is used for trimming caliber specific brass cases in the Hornady Cam-Lock Case Trimmer or the Hornady Case Trimmer. Pilot #8 Fits: .300 Diameter

RCBS Powder Die

The RCBS Powder Die allows the Case Activated Powder Measure (CAPM) to be quickly moved from one Die Plate to another. Allows Case Activated Powder Measure (CAPM) to be quickly moved from one Die Plate to...

RCBS Trim Pro Case Trimmer Cutter .50 Cal

This high-quality replacement cutter is designed for use with RCBS Trim Pro case trimmers. Product 9364 is replacement Trimmer Cutter, 50 cal. 9364 is a 50 Caliber Replacement cutter designed to fit on the High-Capacity case trimmer

Hornady Neck Turning Mandrel for 20 Cal/ .2010"

Hornady 20 Cal .2010 Neck Turn Mandrel - This mandrel is designed to work with the Hornady Neck Turning Tool. Assures Casese Are Properly Alligned     

Hornady Neck Turn Mandrel for 17 Cal / .1720"

Hornady 17 Caliber .1720 Neck Turn Mandrel - This mandrel is designed to work with the Hornady Neck Turning Tool. Assures Casese Are Properly Alligned 

RCBS Replacement Pow'r Pull Impact Bullet Puller Standard Chuck Assembly

Designed for use with the RCBS Pow'r Pull, these three available case-holding chucks will accommodate a range of cases. Replacement Chucks for Pow'r Pull Bullet Puller Aluminum Construction Limited Lifetime Warranty

Hornady Shell Holder #52, (338 Marlin Express)

Precision machined from solid steel then heat treated to perform flawlessly for the life of the press. They fit all other Hornady accessories including the Hornady Cam-Lock Case Trimmer and Hand-Held Priming Tool. These shellholders will also fit the...

Hornady Case Trimmer Pilot #14, .348

The Hornady pilot is used for trimming caliber specific brass cases in the Hornady Cam-Lock Case Trimmer or the Hornady Case Trimmer. Pilot #14 Fits:  .348 diameter  

Hornady Case Trimmer Pilot #13, .338

The Hornady pilot is used for trimming caliber specific brass cases in the Hornady Cam-Lock Case Trimmer or the Hornady Case Trimmer. Pilot #13 Fits: .338 Diameter

MTM Fliptop Large Rifle Belt Style Green Ammo Can, 20 Rounds

The MTM Case-Gard Belt Carrier Series of rifle ammo boxes are a favorite among hunters and shooters throughout the world. The Belt Carrier Series is designed with Snap-Lok top lid, rounded edges, and a non textured surface. These cases are made of a...

Hornady Shell Holder #25

10.3x60R Swiss/348 Winchester/500 Linebaugh/50 Alaskan

Hornady Lock-N-Load Quick Change Hand Tool

The ergonomic Lock-N-Load Quick Change Hand Tool features a dual-sided chuck that allows for the quick changeover of popular case preparation tools like chamfer, deburr, primer pocket reamers and cleaners, brushes or other tools with 8-32 threads...

Lyman E-ZEE FLO Universal Powder Trickler

The first powder Trickler that works with any reloading scale, mechanical or electronic. Lyman's E-ZEE-FLO accessory powder Trickler features an adjustable base that adapts to even that highest scale platform. Powder Trickler tube has an extension that...

Frankford Hinge-Top Ammo Box #503, 38/357, 50 CT

HIGH-DENSITY POLYMER CONSTRUCTION FOR MAXIMUM DURABILITY NEW HINGE-TOP DESIGN PREVENTS LID FROM INADVERTENTLY CLOSING; EXTENDS THE LIFE OF THE AMMO BOX TOP OF THE BOX IS SIZED FOR 1" X 2 5/8" I.D. PRINTER LABELS

Lyman VLD Chamfer/Reamer

Works great for any long boat tail bullet design. For many years, the Lyman VLD Chamfer/ Reamer has been extremely popular with reloaders due to its gentle 22 degree cutting angle. It cuts much easier than standard 45 degree angle reamers and works great...

Lyman Flash Hole Uniformer Tool

This handy tool removes internal flash hole burrs. Features a tool steel cutter which is inserted into the flash hole through the case neck. Adjustable stop collar allows use with any size case. Burrs are removed with a clockwise turn...

Lyman Case Care Kit

This kit contains many of Lyman's most popular case prep tools and is designed to make each of the case prep functions easier with the handy crank.   Kit can be used for: Outside Deburring:  Removes burrs and bevels the outside edge of the...

MTM Case-Gard Ammo Box 50 Round Flip-Top 40 10mm 45 ACP, Clear-Blue

These flip top boxes are available in five sizes to accommodate any type of handgun ammo. They have an easy to grip, scuff-resistant textured surface and are stackable. The Snap-Lok latch and full length mechanical hinge are guaranteed for 25 years.ibers...

Lyman Handgun Cartridge Checker

AMMO CHECKERS CHECK THE QUALITY AND CONSISTENCY OF BOTH RELOADED ROUNDS AND PURCHASED AMMUNITION. MACHINED FROM SOLID BLOCKS OF 6061 T6 AIRCRAFT GRADE ALUMINUM. CUT WITH CUSTOM TOOLING TO SAAMI MINIMUM CHAMBER DIMENSIONS. JUST DROP YOUR LOADED ROUNDS IN...

Lee BL Pro Shell Plate #19

Lee Load-Master progressive 5-hole reloading kit for 44 Special/44 Magnum. Includes dies (Full Length Size, Powder Through Expanding and Bullet Seating Dies), Turret, #11L Shell Plate, Pro Auto-Disk Powder Measure, Universal Case Feeder and Large...

MTM Case-Gard Ammo Box 100 Round Flip-Top 9mm 380 ACP, Clear/Red

The Case-Gard P-100's are the perfect ammo carrier for the handgunner who wants to spend several hours at the range. Ideal for storing reloads. They have an easy to grip, scuff-resistant textured surface and are stackable. The Snap-Lok latch and full...

MTM Case-Gard Ammo Box 100 Round Flip-Top 40 10mm 45 ACP, Clear/Blue

The Case-Gard P-100's are the perfect ammo carrier for the handgunner who wants to spend several hours at the range. Ideal for storing reloads. They have an easy to grip, scuff-resistant textured surface and are stackable. The Snap-Lok latch and full...

MTM Case-Gard Ammo Box 100 Round Flip Top For 22 Mag - 17 HMR, Clear-Red

Designed for great afternoon of varmint or competitive shooting. Made of virtually indestructible polypropylene that will not warp, crack, chip, peel, expand or contract, MTM CASE-GARD rifle ammunition cases are still the first choice of rifle...

Lyman Primer Pocket Large Cleaner

Cleans fouling from primer pocket bottoms. Molded handle included. Available in large or small sizes. For improved accuracy and safety, make sure that your primers are completely seated with Lyman’s Primer Pocket Cleaner...

MTM Slip-Top Ammo Box 30-30, Clear Red, 20 Rounds

25 / 270 / 300 / 325 / 338 / 7mm WSM, 30 Rem, 300 / 7mm Rem. SAUM, 300 / 338 RCM, 348 / 356 / 375 / 38-56 / 40-65 Win., 375 Rimless 2 ¼”, 376 Steyr, 38-55 Ballard, 45-70 Govt., 40-82 / 45-90 / 348 WCF, 40-60 / 450 Marlin, 460 / 500 S&W...

Lucas Oil Gun Metal Polish, 4 Oz

Used and recommended by major firearms manufacturers, Lucas Oil Gun Metal Polish & Tumbler Media Additive cleans and polishes factory firearm finishes like blue, nickel, stainless, aluminum and brass. Its acid and ammonia free formula safely removes...

Federation Adapter Insert for 12 Ga Single Shot Shotgun, 12 Ga 3" to Shoot 410 3"

Federation Firearms adapter for 12ga single shot shotgun. Adapts 12ga 3″ to shoot .410 3″

MTM Fliptop Ammo Box 338 WSM/ 45-70

Your ammunition will stay safe and dry in these 22 round flip top ammo boxes made from polypropylene. They are designed for the new short magnums and the large ultra magnums and will not warp crack chip peel expand or contract.

MTM Fliptop 9MM 200 Round Ammo Box, Green

The 200 Round Ammo Box Series was conceived to address the growing handloading movement and the difficulties shooters and hunters currently face in trying to acquire factory ammunition. Common defensive loads, in particular, are being assembled in larger...

Lee 452-230 TC 6 Cavity Bullet Mold

Lee 6 cavity block produces a .452 diameter 230 grain Truncated Cone nose bullet suitable for cartridges like 45ACP, 45 Colt, etc. Bullet Mold lube and handles sold separately.

Lee 357 Mag Pistol Loader

Kit includes everything needed to reload 9-mm Luger except a rubber mallet Please note: the Classic Lee Loader neck sizes only This is not recommended for semi, pump and lever action guns Made in USA

Lee 9mm Luger Pistol Loader

Kit includes everything needed to reload 9-mm Luger except a rubber mallet Please note: the Classic Lee Loader neck sizes only This is not recommended for semi, pump and lever action guns Made in USA

Lee 38 SPL Pistol Lee Loader

Includes everything needed to reload 38 SPL. except a rubber mallet Please note: the Classic Lee Loader neck sizes only This is not recommended for semi, pump and lever action guns Made in USA

Lee Classic Bullet Sizing Kit .510 DIA

Lee Classic Bullet Sizing Kit .510 DIA

Lee Classic Bullet Sizing Kit .243 DIA

Lee's Lube & Size Kit allows you to lubricate and size cast bullets. It can also seat and crimp gas checks. Intended for use on single stage presses only, the sizer die has standard 7/8 x 14 threads. Bullets are pushed through the sizing die nose...

Lyman Digital Lead Thermometer

The Lyman Digital Thermometer is a fast and accurate way to check the temperature of your casting alloy. The long 6” probe will work with the largest casting furnaces and keeps your hand away from molten lead. The large, easy to read display can be...

Lee Bench Prime Press Kit

Featuring all of the components of the 50th Anniversary Kit, but we’ve replaced the Safety Prime with the Auto Bench Prime and three of the most popular Priming Tool shell holders which work with over 60...

Frankford Arsenal CleanCast Lead Flux - 1 lb

Lead fluxing made easy.  No more using rosin, paraffin, tallow, bullet lube and other homemade concoctions. CleanCast is non-smoking, odor-free and it really works. Only a small amount is necessary to prepare a 20lb lead pot for bullet...

Frankford Arsenal Cartridge Overall Length Gauge

f you have a cleaning rod and a set of calipers, you can now determine the optimum OAL for any bullet in less than two minutes. This simple kit consists of two clamps that easily attach to any cleaning rod, ¼” in diameter or less. Simply...

Frankford Arsenal Quick-N-EZ Rotary Sifter Kit with Bucket

Includes Quick-n-EZ™ Rotary Separator, Plastic Bucket, 2 bucket supports and 2 splash fins (with plastic bucket). The  Quick-n-EZ™ Rotary Separator is perfect for separating the stainless steel pins from your brass after rotary tumbling...

Frankford Arsenal Universal Reloading Tray

The Universal Reloading Tray is highly versatile.  It can be used with a wide variety of rifle cartridges from .17 caliber up to .458 caliber.  It also works well for handgun cartridges 9mm to 500 S&W.  50 round capacity.   Brass...

Frankford Arsenal #515 Hinge-Top Ammo Boxes - 50 Round Capacity

Compatible With The Following Ammo Calibers: 270 WSM7mm SAUM7mm WSM300 WSM

Frankford Arsenal #514 Hinge-Top Ammo Boxes - 50 Round Capacity

Compatible With The Following Ammo Calibers: 38-56 WCF38-70 WCF40-65 WCF40-65 Ballard45-70 Govt.50-70 Govt50 110 WCF460 S&W28 Gauge

Frankford Arsenal #508 Hinge-Top Ammo Boxes - 50 Round Capacity

Compatible With The Following Ammo Calibers: 10mm Auto40 S&W45 ACP45 Auto Rim

Frankford Arsenal #506 Hinge-Top Ammo Boxes - 50 Round Capacity

Compatible With The Following Ammo Calibers: .480 Rug.475 Linebaugh.50 AE500 Linebaugh

Frankford Arsenal #501 Hinge-Top Ammo Boxes, 50 Round Capacity

Compatible With The Following Ammo Calibers: .25 ACP.380 Auto9x19mm Luger9x19 Markarov