S&J Hardware

S&J Blue Line Magazine Extension, +1

Will fit: Blue Line Remington 870 Clone 12GA shotgun. CNC machined from 4140 steel. Finished product will be Cerakoted in Graphite Black Comes with: 3 Position Sling Plate C Clip (to install sling plate) 1 Million Cycle Magazine Tube Spring No Jam...

S&J Winchester SXP Magazine Extension, +2

Will fit: Winchester SXP 12 GA Shotguns CNC machined from 4140 steel. Finished product will be Cerakoted in Graphite Black Comes with: 3 Position Sling Plate C Clip (to install sling plate) 1 Million Cycle Magazine Tube Spring No Jam Follower - Type...

S&J Mossberg 930 Magazine Extension, 6.75" +2 (Canada-Legal Blocked to +1), Black

Will fit Mossberg 930, 935, and 940 pro tactical. Will not work with the 940 JM Pro Canadian Legal are blocked to +1 capacity Canadian law mandates that semi-automatic shotgun capacity is restricted to 5 rounds of the largest capable...

S&J Benelli Nova Magazine Extension, +2, Black

Will fit: Benelli Nova, Benelli Super Nova, and Fabarm Pumps. CNC machined from 4140 steel. Finished product will be Cerakoted in Graphite Black Comes with: 3 Position Sling Plate C Clip (to install sling plate) 1 Million Cycle Magazine Tube Spring No...

S&J Mossberg 590 Series Magazine Extension, +1, Black

Will fit Mossberg 590, 535, and 835 shotguns. CNC machined from 4140 steel. Finished product will be Cerakoted in the following colours: Graphite Black OD Green Patriot Brown Silver (Best match for electroless nickel) Comes with: 3 Position...

S&J Remington 870 Jumbo Safety

The S&J Hardware Jumbo Combat Safety is much larger than OEM safety. The ergonomic design allows you to feel the safety and its current condition very easily through gloves. It is also easier to find in low and no light conditions, and allows...

S&J No Jam Follower, Type 3, 12GA, Beretta

Our mag follower is the best on the market today, will not break down with cleaning compound and will not crack. CNC milled from 2 inch block of Safety DuPont Delrin®, it does not react to heat or cold, and thus reduces jamming. Machined Delrin Mag...

S&J No Jam Follower, Type 3, 12GA, Mossberg

Mossberg Type 3 Magazine Follower For 12 Gauge Our mag follower is the best on the market today, will not break down with cleaning compound and will not crack. CNC milled from 2 inch block of Safety  DuPont Delrin®, it does not react to...

S&J No Jam Follower, Type 3, 12GA, Remington

Our mag follower is the best on the market today, will not break down with cleaning compound and will not crack. CNC milled from 2 inch block of Safety  DuPont Delrin, it does not react to heat or cold, and thus reduces jamming.Machined Delrin Mag...

S&J Beretta 1301 Combat Charging Handle

Over sized charging handle for the Beretta 1301 CNC machined from 4140 steel  Finished in graphite black cerakote Made in Canada

S&J Shotgun Barrel Clamp With Light Rail & QD

This Shotgun Barrel Clamp With Light Rail & QD Point is: CNC Machined From 6061 T6 Aluminium MIL-SPEC Type 3 Hard Anodized. M1913 light rail. QD cut sling attachment Each clamp kit comes with the following: Two clamp halves One M1913 light...

S&J EBR Extended Bolt Release 4.0, Beretta 1301 /A300

S&J EBR 4.0 Extended Bolt Release This is a continuation of our Extended Bolt Release concept. It replaces the factory plastic sleeve on the Beretta A300 and Gen 2 1301s.  Our aluminum replacement Extended Bolt Release mounts to the bolt...

S&J Stoeger M3K to Remington 870 Magpul SGA Stock Adaptor

S&J STOCK ADAPTOR for Stoeger M3K Stock Adaptor allows for you to use Remington 870 stocks such as the SGA series on your Stoeger M3k/M3000/M3500/P3000 series 12ga shotguns.Precision machined from 6061 T6 aluminum.303 stainless nut.Stainless...

S&J Sierra RD Optics Plate, Acro Mount, Beretta 1301

The Sierra RD Optic plate is available for the following shotgun manufacturers: Beretta - 1301 tactical (will not fit the 1301 comp) The Sierra RD Optics Plate is available in the following configurations: Acro Mount - Aimpoint Acro P1/P2/...

S&J Sierra RD Optics Plate, RMR Mount, Mossberg

The Sierra RD Optic plate is available for the following shotgun manufacturers: Mossberg - 500, 590, 930 The Sierra RD Optics Plate is available in the following configurations: RMR Mount - Trijicon RMR/ Holosun...

S&J Sierra RD Optics Plate, RMR Mount, Beretta 1301

The Sierra RD Optic plate is available for the following shotgun manufacturers: Beretta - 1301 tactical (will not fit the 1301 comp) The Sierra RD Optics Plate is available in the following configurations: RMR Mount - Trijicon RMR/ Holosun...

S&J Sierra RD Optics Plate, RMR Mount, Benelli M4

The Sierra RD Optic plate is available for the following shotgun manufacturers: Benelli - M4, Nova, Stoeger M3K The Sierra RD Optics Plate is available in the following configurations: RMR Mount - Trijicon RMR/ Holosun...

S&J Spring and Follower Kit, Beretta 1301/ A300 Patrol

12 gauge Spring & No Jam Follower Kit. Specifically designed for the Beretta 1301/ A300 Patrol. Replacement shotgun magazine spring and S&J Hardware No-Jam Type 3B magazine follower. Magazine spring is 48 inches long.Spring is extra long,...

S&J Spring And Follower Kit, Universal 12 GA

12 gauge Spring & No Jam Follower Kit.Replacement shotgun magazine spring and S&J Hardware No-Jam Type 3 magazine follower. Magazine spring is 48 inches long and will fit most 12ga shotguns.Spring is extra long, so it will probably need...

S&J Detachable Shotshell Carrier Strip, 6 Shot, FDE

12ga/20ga Detachable Shotshell Carrier Strip.Comes in 4, 6, or 7 shot.Made with MIL SPEC webbing and elastic with a Tegris core.Secured with velcro for reliability and rapid deployment.Made in Canada. Overall Length: 4 shot - 4.5 inches 5 shot - 5.5...

S&J Detachable Shotshell Carrier Strip, 6 Shot, Black

12ga/20ga Detachable Shotshell Carrier Strip.Comes in 4, 6, or 7 shot.Made with MIL SPEC webbing and elastic with a Tegris core.Secured with velcro for reliability and rapid deployment.Made in Canada. Overall Length: 4 shot - 4.5 inches 5 shot - 5.5...

S&J Remington Sierra Optics Plate, Fits Trijicon RMR

Machined from 6061 T6 Aluminum. Optics cut is machined for Aimpoint T2, Holosun 403 footprint or; Trijicon RMR, Holosun 507/508 footprint. Milspec Type 3 Class II Anodizing Comes with all mounting hardware. Installation instructions included. Pictures...

S&J Benelli M4, Sierra RD Optics Plate, Fits Aimpoint T2/Holosun 403

Machined from 6061 T6 Aluminum. Optics cut is machined for Aimpoint T2, Holosun 403 footprint or; Trijicon RMR, Holosun 507/508 footprint. Milspec Type 3 Class II Anodizing Comes with all mounting hardware. Installation instructions included. Pictures...

S&J Detachable Shotshell Carrier Strip, 6 Shot, Multicam

12ga/20ga Detachable Shotshell Carrier Strip.Comes in 4, 6, or 7 shot.Made with MIL SPEC webbing and elastic with a Tegris core.Secured with velcro for reliability and rapid deployment.Made in Canada. Overall Length: 4 shot - 4.5 inches 5 shot - 5.5...

S&J Mossberg Jumbo Safety

Much larger than OEM safety. Machined grip surface and larger surface are makes it easier to find in darkness and allows for more positive engagement. CNC machined from 6061 T6 Aluminum. Mil Spec Type 3 class 2 anodised.   Made in...

S&J Benelli M4 Jumbo Safety

Suitable for use with gloved hands. Sure activation and deactivation. Easy to install.Machined from solid 4140 steelNitride finish in blackMade in Canada

S&J Benelli M4 Magazine Extension Canadian Legal +1

Canadian law mandates that semi-automatic shotgun capacity is restricted to 5 rounds of the largest capable shotshell for that shotgun. The Benelli M4 is designed for 2 3/4" inch shells and 3" shells. So, the legal limit is 5 rounds of 3" shells...

S&J Mossberg 930 Combat Charging Handle

Mossberg 930 Oversize Charging Handle. Re-Designed. Version 2.0 Perfect For 3 Gun Competitions, Tactical, Or Cold Weather Use. Precision Machined From Tool Steel And Controlled Gas Nitride Finished.

S&J Remington Versamax Combat Charging Handle

One of the issues with any semi auto shotgun, is the charging handle.  Too small, and you can't use with gloves, too big, and they get in the way, snap off or just make the gun malfunction.     Oversized charging handle for...

S&J No Jam Follower Type 4 20 Ga, Green

Pardner Pump 20 Gauge Follower Type 4 GreenS&J Hardware NoJam Design For 20 GaugeCNC machined from a solid block of DuPont Delrin Our mag follower is the best on the market today, will not break down with cleaning compound and will not crack. CNC...

S&J Remington 870 +2 Magazine Tube Extension, Black

Fits: Remington 870, 1100, 11-87, & Versamax. CNC machined from 4140 steel. Finished product will be Cerakoted in Graphite Black Comes with: 3 Position Sling Plate C Clip (to install sling plate) 1 Million Cycle Magazine Tube Spring No Jam Follower...

S&J Remington 870 +1 Magazine Tube Extension, Black

Fits: Remington 870, 1100, 11-87, & Versamax. CNC machined from 4140 steel. Finished product will be Cerakoted in Graphite Black  Comes with: 3 Position Sling Plate C Clip (to install sling plate) 1 Million Cycle Magazine Tube...