Reloading Dies

Hornady Die Set 3, 380 Auto (.355)

Hornady Die Set 3 for .380 Auto (.355")

RCBS Full Length Die Set, Group A, 222 Rem

This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge...

RCBS 3-Die Set , Group C, 45/70 Government

The 3-Die Set has a sizer die with decapping unit, an expander die and a seater die with crimp. Cases must be lubed prior to sizing. Shellholder sold separately. Notes: Does not feature a carbide sizing ring (cases must be lubed prior to...

RCBS Full Length Die Set, Group A, 243 Win

The RCBS 2-Die Set includes a full length sizer die has an expander-decapping unit to remove the spent primer while expanding the case mouth. Vent holes prevent case damage caused by trapped air or excessive lubricant. The seater die includes a bullet...

RCBS Full Length Die Set, Group A, 338 Win Mag

This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge...

RCBS Full Length Die Set, Group A, 280 Rem

This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge...

RCBS Full Length Die Set, Group A, 257 WBY Mag

This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge...

RCBS Full Length Die Set, Group A, 6.5x55 SWE

This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge...

RCBS 2-Die Set, Group-A, .30-30 Winchester

The RCBS 2-Die Set includes a full length sizer die has an expander-decapping unit to remove the spent primer while expanding the case mouth. Vent holes prevent case damage caused by trapped air or excessive lubricant. The seater die includes a bullet...

RCBS Full Length Die Set, Group A, 303B

These two die-sets are intended for reloading bottleneck cases, and consist of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge...

RCBS .25-06 Rem, Full Length Sizer /Taper Crimp Set of 2

This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge...

RCBS Full Length Die Set, Group A, 7MM-08 REM

This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge...

RCBS Full Length Die Set, Group A, 300 Wby Mag

This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI...

RCBS Full Length 2-Die Set, 7.62x39 (308/311)

This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge...

RCBS 20515 Carbide 3-Die Set , Group B, 9mm Luger/9mmx21/356TSW

Made from polished and heat-treated steel, the RCBS Carbide 3-Die Set has a Sizer Die with Decapping Unit, Expander Die for expanding and belling the case mouth and a Seater Die for seating and crimping the bullet (Straight wall cases will roll crimp,...

RCBS Full Length Die Set, Group A, 260 Rem

These two die-sets are intended for reloading bottleneck cases, and consist of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge...

RCBS Full Length Die Set 300 Win Short Mag, Group A

This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge...

RCBS Full Length Die Set, Group A, 240 Wby

This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge...

RCBS Full Length Die Set, Group A, 270 Win Short Mag

RCBS Bottleneck Die sets include a full length sizing and decapping die, and a bullet seater and taper crimping die. The Full Length Sizer Die has an expander decapping unit to remove the spent primer while expanding the case mouth. Vent holes prevent...

RCBS Full Length Die Set Group D 308 Norm

This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge...

Hornady Series I 2-Die Rifle Die Set 338 Win Mag (.338)

This die set includes Custom Grade New Dimension (CGND) Full Length Sizer and a CGND Seating Die. The Full Length Die now features a Zip Spindle with a series of light threads cut on the spindle and spindle collet to eliminate slippage and make it easier...

Hornady Series II 3-Die Rifle Die Set 444 Marlin (.430)

This die set includes Custom Grade New Dimension (CGND) Full Length Sizer and a CGND Seating Die. The Full Length Die now features a Zip Spindle with a series of light threads cut on the spindle and spindle collet to eliminate slippage and make it easier...

RCBS Full Length Die Set Group D 6.5-300 Wby Mag

 This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge...

Hornady Series I 2-Die Rifle Die Set 6.5 PRC (.264)

Hornady's custom grade dies provide a lifetime of reloading. They're so well crafted that they're guaranteed never to break or wear out from normal use and now they're better than ever. The spindle design features a series of light threads out on the...

Hornady Series III 2-Die Rifle Die Set 17 Rem (.172)

Series III 2-Die Rifle Die Set 17 Rem (.172)

Hornady Series IV Rifle Die Sets 2-Die 6mmx47 Rem (.243)

Series IV Rifle Die Sets 2-Die 6mmx47 Rem (.243)

Hornady Series I 2-Die Rifle Die Set 7mm Wsm (.284)

Series I 2-Die Rifle Die Set 7mm Wsm (.284)

Hornady Series IV Rifle Die Sets 2-Die 7X61 S&H (.284)

Series IV Rifle Die Sets 2-Die 7X61 S&H (.284)

Lee 9mm Luger Pistol Loader

Kit includes everything needed to reload 9-mm Luger except a rubber mallet Please note: the Classic Lee Loader neck sizes only This is not recommended for semi, pump and lever action guns Made in USA

Lee 38 SPL Pistol Lee Loader

Includes everything needed to reload 38 SPL. except a rubber mallet Please note: the Classic Lee Loader neck sizes only This is not recommended for semi, pump and lever action guns Made in USA

Lee Classic Bullet Sizing Kit .510 DIA

Lee Classic Bullet Sizing Kit .510 DIA

Lee Classic Bullet Sizing Kit .243 DIA

Lee's Lube & Size Kit allows you to lubricate and size cast bullets. It can also seat and crimp gas checks. Intended for use on single stage presses only, the sizer die has standard 7/8 x 14 threads. Bullets are pushed through the sizing die nose...

Lee 6.8 Western Die Set

Lee 6.8 Western PaceSetter 3-Die Set includes a Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, and Instructions. Please note, there is no load data available for this cartridge, a dipper is...

Lee 25-45 Sharps Very Limited Production 3 Die Set

The Lee Factory Crimp Die, Full Length Sizer Die, and Bullet Seater Die are included in the Lee Pacesetter 3-Die Set. They're made of steel and come with the necessary Shellholder, Powder Measure, load data, and a plastic storage box.All Lee dies are...

Lee 45 Auto Lee Loader

Lee Loader is a complete reloading system, kit includes everything needed to reload 45 Auto, except wood or plastic mallet.

Lee 44 Mag Lee Loader

Lee Loader is a complete reloading system, kit includes everything needed to reload 44 Magnum. This kit can also reload the 44 Special, you will need to obtain 44 Special load data and appropriate powder scoop.

Lee Precision 455 Webley Mark II, Carbide 3- Die Set

Lee 455 Webley Mark II Pistol 3-Die Set includes Carbide Full Length Sizing Die, Bullet Seating Die, Powder Thru Expanding Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.

Hornady 450 Bushmaster Custom Grade 4-Die Set

Hornady's custom grade dies provide a lifetime of reloading. They're so well crafted that they're guaranteed never to break or wear out from normal use and now they're better than ever. The spindle design features a series of light threads out on the...

Hornady 270 Cal Mag .277" Neck Sizer Die

Neck sizing with this die can eliminate problems of excessive head space, and align the bullet perfectly with the bore, resulting in better accuracy and longer case life. Should only be used for bolt-action rifle cases. Auto-loading, lever and pump...

Hornady 6mm Cal Short .243" Neck Sizer Die

Neck sizing with this die can eliminate problems of excessive head space, and align the bullet perfectly with the bore, resulting in better accuracy and longer case life. Should only be used for bolt-action rifle cases. Auto-loading, lever and pump...

Hornady Custom Grade 350 Legend (.355) 4 Die Set

Hornady Custom Grade Die sets are meticulously manufactured using precision CNC machining to ensure extremely close tolerances. These precision dies give the reloader additional control over the ammo-making procedure.The Hornady Custom Grade 4-Die Set is...

Hornady Custom Grade Full Length 350 Legend Die

The Hornady Custom Grade New Dimension Full Length Sizer Die is a great die for the avid reloader. The  Full Length Sizer die features polished elliptical expanders, that significantly reduce case neck stretch. The hardened steel decapping pin will...

Lee Precision 7MM Rem Ultra Mag Die Set

Lee 7MM Ultra Mag PaceSetter 3-Die Set includes a Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.

Lee Precision 260 Rem Factory Crimp Die

Lee 260 REM Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher...

Lee Precision Deluxe 45 ACP 4 Die Pistol Set

Lee 45 ACP Pistol 4-Die Set. Includes Carbide Full Length Sizing Die, Bullet Seating Die, Powder Thru Expanding Die, Carbide Factory Crimp Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.

Lee Precision Deluxe 40 S&W 4 Die Pistol Set

Lee 40 S&W Pistol 4-Die Set. Includes Carbide Full Length Sizing Die, Bullet Seating Die, Powder Thru Expanding Die, Carbide Factory Crimp Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.   Note: can be used to load...

Lee Precision 300 Win Mag Collet Die

Lee 300 Win Mag Collet Die only that uses a Collet to squeeze a Mandrel, creating a precisely aligned case neck while reducing run out. Sizes just the neck and requires no lubrication.

Lee Precision 22/250 Collet Die

Lee 22/250 Collet Die only that uses a Collet to squeeze a Mandrel, creating a precisely aligned case neck while reducing run out. Sizes just the neck and requires no lubrication.

Lee Precision 300 WSM Die Set

Lee 300 WSM PaceSetter 3-Die Set includes a Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.

Lee Precision 500 S&W Collet Style Crimp Die

500 S&W Collet Style Crimp Die. Incorporates a collet to apply a rifle type crimp to the case. Makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove, as the collet is so powerful it will form one...

Lee Precision 460 S&W Collet Style Crimp Die

460 S&W Collet Style Crimp Die. Incorporates a collet to apply a rifle type crimp to the case. Makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove, as the collet is so powerful it will form one...

Lee Precision 8 X 56 R Hungarian Die Set

Lee 8X56R Hungarian Limited Production 2-Die Set includes a Full Length Sizing Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.