SNOWMOBILE

Kimpex Rouski Ski Adapter for Rouski EVO - 472202

The Rouski EVO is a retractable wheel system for snowmobiles that improves your off snow riding experience. Efficient to protect your runners and make your travel easier, the Rouski EVO features an easier-to-engage system, which is compact, lockable, and...

SnowTracker Auto-Sharpening OEM Replacement Runner Fits Arctic cat

After the great success of the SnowTracker, here are the auto-sharpening runners from SnowTracker. These runners are special due to their revolutionary design. Treated thermically with a hardness balanced in order to offer an equal wear of your runner...

Caliber Screw Pack - 129157

Quantity: 8Kimpex Data: Barcode: 779422205781 Supplier Number: 66115Kimpex Catalog Number: 129157Product Data:Number: 129157

Seat Jack Slide Rail Kit - 288029

Material: Steel Sold by pairKimpex Data: Barcode: 779422404375 Supplier Number: T-FUSJKimpex Catalog Number: 288029Product Data:Compatible Brand: Fits PolarisModel: FusionPosition: Right and leftColor: BlackNumber: 288029

Seat Jack Slide Rail Kit - 288028

Material: Steel Sold by pairKimpex Data: Barcode: 779422404368 Supplier Number: T-F7JKimpex Catalog Number: 288028Product Data:Compatible Brand: Fits Arctic catModel: F-7Position: Right and leftColor: BlackNumber: 288028

G-Force Redline Drive Belt 210449 - 210449

Greater heat resistance and recovery, even under severe duty cycles Optimized, patented EE (Ethylene Elastomer) compound maximizes axial stiffness enabling belts to run at higher continuous torques or loads Innovative design results in better...

Kimpex Plastic Ski Skins - 272072

The slippery surface creates unbelievable deep snow flotation, and lets you maintain high speed on wet or sticky snow. Made from super strong HMW, high impact plastic, easy installation. Use your original wear bar or Kimpex. Will protect your skis from...

Kimpex Slide Suspension Spring Retainer - 299909

Slide Suspension Spring RetainerKimpex Data: Barcode: 779420524228 Supplier Number: 299909Kimpex Catalog Number: 299909Product Data:Package quantity: 1Diameter: Fits on: Arctic CatFits on: YamahaNumber: 299909

Kimpex Radius Rod Fits Polaris - 105530

Radius RodKimpex Data: Barcode: 779422296215 Supplier Number: 1820588-067Kimpex Catalog Number: 08-385-01Product Data:Position: UpperSold: Compatible Brand: Fits PolarisMaterial: Width enlargement: Offset: Height increase: Color: BlackNotes: Number:...

ITEK Brake Levers - 335221

Brake lever in anodized aluminum or powdercoated Much stronger than the original plastic lever Plastic insert to eliminate cold from aluminumKimpex Data: Barcode: 779420293759 Supplier Number: LV-PC-MGKimpex Catalog Number: 335221Product Data:Lever...

ITEK Brake Levers - 335220

Brake lever in anodized aluminum or powdercoated Much stronger than the original plastic lever Plastic insert to eliminate cold from aluminumKimpex Data: Barcode: 779420294060 Supplier Number: LV-PC-VTKimpex Catalog Number: 335220Product Data:Lever...

ITEK Brake Levers - 335214

Brake lever in anodized aluminum or powdercoated Much stronger than the original plastic lever Plastic insert to eliminate cold from aluminumKimpex Data: Barcode: 779420293711 Supplier Number: LV-PC-NRKimpex Catalog Number: 335214Product Data:Lever...

Kimpex Suspension Shock Rear suspension rear arm - 332464

Direct OEM Replacement. Maximize all day running comfort through the roughest conditions. Consistent operation even in adverse weather conditions. Sold as unit.Kimpex Data: Barcode: 779421601034 Supplier Number: SU-04064Kimpex Catalog Number:...

VertexWinderosa Gasket Material - 287505

Metal reinforced heat gasket material Heat resistant Steel reinforced exhaust material Cork and rubber nitril based material Gasoline and oil resistantKimpex Data: Barcode: 779422252808 Supplier Number: 310102Kimpex Catalog Number: 287505Product...

ITEK Ski-doo Front Bumper Front - Aluminum - Fits Ski-doo - 335198

Made of aluminum Powdercoated Protects part of the sides as well as the bottom Easy to install Maximum impact protection Large protective surface Compatible with BRP skid plates *Does not fit on Gen4 ''Wide'' frameKimpex Data: Barcode: 779420293803...

ITEK Ski-doo Front Bumper Front - Aluminum - Fits Ski-doo - 335197

Made of aluminum Powdercoated Protects part of the sides as well as the bottom Easy to install Maximum impact protection Large protective surface Compatible with BRP skid plates *Does not fit on Gen4 ''Wide'' frameKimpex Data: Barcode: 779420293797...

ITEK Ski-doo Front Bumper Front - Aluminum - Fits Ski-doo - 335195

Made of aluminum Powdercoated Protects part of the sides as well as the bottom Easy to install Maximum impact protection Large protective surface Compatible with BRP skid plates *Does not fit on Gen4 ''Wide'' frameKimpex Data: Barcode: 779420293773...

ITEK Bumper Powdercoat Series Rear - Fits Arctic cat - 335193

Powdercoat rear bumper with raised handle for better grips when the snowmobile is in deep snow Increase the rigidity of the tunnel Stainless steel hardware includedKimpex Data: Barcode: 779420084098 Supplier Number: PA02-AC-12-MS-153-REKimpex Catalog...

Kimpex Windshield Fits Ski-doo - 274751

All Kimpex Windshield are made of Optical Grade Polycarbonate which is the same material used as original equipment. To help you find the appropriate windshield, we have incorporated the heights for all the windshields available. The height of our...

ITEK Powdercoat Big Wheels kit Aluminum - Fits Ski-doo - 335174

The installation of a set of big wheels kit increases the diameter of the rear wheels by 1.5 '' which makes the track easier to rotate resulting in a gain in HP and offers better performance backward in the powdered snow . The set includes: A deax axle...

ITEK Powdercoat Big Wheels kit Aluminum - Fits Ski-doo - 335173

The installation of a set of big wheels kit increases the diameter of the rear wheels by 1.5 '' which makes the track easier to rotate resulting in a gain in HP and offers better performance backward in the powdered snow . The set includes: A deax axle...

ITEK Powdercoat Big Wheels kit Aluminum - Fits Polaris - 335172

The installation of a set of big wheels kit increases the diameter of the rear wheels by 1.5 '' which makes the track easier to rotate resulting in a gain in HP and offers better performance backward in the powdered snow . The set includes: A deax axle...

ITEK Powdercoat Big Wheels kit Aluminum - Fits Polaris - 335167

The installation of a set of big wheels kit increases the diameter of the rear wheels by 1.5 '' which makes the track easier to rotate resulting in a gain in HP and offers better performance backward in the powdered snow . The set includes: A deax axle...

ITEK Powdercoat Big Wheels kit Aluminum - Fits Polaris - 335166

The installation of a set of big wheels kit increases the diameter of the rear wheels by 1.5 '' which makes the track easier to rotate resulting in a gain in HP and offers better performance backward in the powdered snow . The set includes: A deax axle...

ITEK Powdercoat Big Wheels kit Aluminum - Fits Polaris - 335165

The installation of a set of big wheels kit increases the diameter of the rear wheels by 1.5 '' which makes the track easier to rotate resulting in a gain in HP and offers better performance backward in the powdered snow . The set includes: A deax axle...

ITEK Skid Plate Fits Polaris - 335160

Compatible with Itek Industries front bumper and the original one Made of aluminum Powdercoated Offers protection over a large area Hardware included * Not compatible with Polaris or other make Skid PlateKimpex Data: Barcode: 779421873318 Supplier...

ITEK Polaris Front Bumper Front - Aluminum - Fits Polaris - 335152

Made of aluminum Powdercoated Protective plate to prevent any debris from getting between the plastics of the snowmobile and the bumper on the side Easy to install Maximum impact protection Large protective surface Does not come with the skid plate (sold...

VertexWinderosa Pro-Formance Top End Gasket Sets Fits Polaris - 09-710231 - 303930

710- Pro-Formance Gasket Sets : These sets include the head, base, and upper end gaskets. These sets are designed for piston replacement. Gaskets and o-rings for power valve rebuild also included. Refer to the chart to find your model.Kimpex Data: ...

ITEK Polaris Front Bumper Front - Aluminum - Fits Polaris - 335148

Made of aluminum Powdercoated Protective plate to prevent any debris from getting between the plastics of the snowmobile and the bumper on the side Easy to install Maximum impact protection Large protective surface Does not come with the skid plate (sold...

ITEK Polaris Front Bumper Front - Aluminum - Fits Polaris - 335147

Made of aluminum Powdercoated Protective plate to prevent any debris from getting between the plastics of the snowmobile and the bumper on the side Easy to install Maximum impact protection Large protective surface Does not come with the skid plate (sold...

ITEK Gas can bracket kit - 335123

Powder coat finish based on corporate colors Made of aluminum Sold with hardware and “quick-release fasteners” Scepter 10L gas can is not included No drilling required for Polaris equipped with the “T-Slot” system on the tunnel No drilling required...

ITEK Gas can bracket kit - 335121

Powder coat finish based on corporate colors Made of aluminum Sold with hardware and “quick-release fasteners” Scepter 10L gas can is not included No drilling required for Polaris equipped with the “T-Slot” system on the tunnel No drilling required...

ITEK Gas can bracket kit - 335118

Powder coat finish based on corporate colors Made of aluminum Sold with hardware and “quick-release fasteners” Scepter 10L gas can is not included No drilling required for Polaris equipped with the “T-Slot” system on the tunnel No drilling required...

ITEK Bumper Powdercoat Series Rear - Steel - Fits Ski-doo - 335113

Powdercoat rear bumper with raised handle for better grips when the snowmobile is in deep snow Increase the rigidity of the tunnel Stainless steel hardware includedKimpex Data: Barcode: 779421850098 Supplier Number: PA02-SD-17-EX-165-OCKimpex Catalog...

ITEK Bumper Powdercoat Series Rear - Steel - Fits Ski-doo - 335110

Powdercoat rear bumper with raised handle for better grips when the snowmobile is in deep snow Increase the rigidity of the tunnel Stainless steel hardware includedKimpex Data: Barcode: 779421850067 Supplier Number: PA02-SD-17-EX-154-NRKimpex Catalog...

ITEK Accessory System Lock - 335104

Accessory used to lock the BRP fasteners. The assembly is made of 6061-T6 aluminum and UHMW.Kimpex Data: Barcode: 779421850166 Supplier Number: LOCK02-OGKimpex Catalog Number: 335104Product Data:Compatible Brand: Fits BRPColor: Orange

ITEK Accessory System Lock - 335103

Accessory used to lock the BRP fasteners. The assembly is made of 6061-T6 aluminum and UHMW.Kimpex Data: Barcode: 779421850159 Supplier Number: LOCK02-NRKimpex Catalog Number: 335103Product Data:Compatible Brand: Fits BRPColor: Black

ITEK Accessory System Lock - 335100

Accessory used to lock the BRP fasteners. The assembly is made of 6061-T6 aluminum and UHMW.Kimpex Data: Barcode: 779421850128 Supplier Number: LOCK02-ALKimpex Catalog Number: 335100Product Data:Compatible Brand: Fits BRPColor: Aluminium

VertexWinderosa Professional Complete Gasket Sets with Oil Seals Fits Arctic cat - 09-711266 - 287414

711 - Professional Complete Gasket Sets with Oil Seals These sets include all gaskets, o-rings and oil seals necessary to rebuild the engine.Kimpex Data: Barcode: 779422189487 Supplier Number: 711266Kimpex Catalog Number: 09-711266Product...

ITEK Bumper Powdercoat Series Rear - Steel - Fits Ski-doo - 335082

Powdercoat rear bumper with raised handle for better grips when the snowmobile is in deep snow Increase the rigidity of the tunnel Stainless steel hardware includedKimpex Data: Barcode: 779421737900 Supplier Number: PA02-SD-17-SU-154-VMKimpex Catalog...

Kimpex Tow Strap 1"X15' - 715073

Whether stuck in slush, deep powder or have a sled out of commision, ensure you are prepared. This rescue strap should be part of every snowmobiler's tool kit. Durable 1 inch web is 15 feet long and has snap hook ends so it does not come off during use...

ITEK Rail Stiffeners Powdercoat Series - 335070

Rails reinforcements for Arctic Cat , Polaris and Yamaha Improves the rigidity of OEM suspension rails Sold in 6 pieces (3 per side ) Powdercoat finish Hardware included Drilling requiredKimpex Data: Barcode: 779421662561 Supplier Number:...

Caliber D-Ring Pan Fitting - 201805

Powerful Retail Presence for Dealers Each pack includes 2 D-Rings Rated to 5,000 lbs Kit includes all hardware Flush mount so it doesn’t interfere with your cargo Available in Stainless Steel or Zinc Plated Backer plate included, standardKimpex Data: ...

ITEK Bracket Adapter without T-Slot Fuel - 335036

ONLY FITS ON MODELS WITHOUT T-SLOT, SKI-DOO 15 "AND LESS WIDTH, ARCTIC CAT ET YAMAHA UNIVERSAL The Link-it system is designed to fit on any BRP, Polaris, Yamaha or Arctic Cat snowmobile Brackets Sold with hardware The bracket Base Kit (860201806) must...

ITEK Bracket Adapter without T-Slot Fuel - 335034

ONLY FITS ON MODELS WITHOUT T-SLOT, SKI-DOO 15 "AND LESS WIDTH, ARCTIC CAT ET YAMAHA UNIVERSAL The Link-it system is designed to fit on any BRP, Polaris, Yamaha or Arctic Cat snowmobile Brackets Sold with hardware The bracket Base Kit (860201806) must...

ITEK Bracket Adapter without T-Slot Fuel - 335031

ONLY FITS ON MODELS WITHOUT T-SLOT, SKI-DOO 15 "AND LESS WIDTH, ARCTIC CAT ET YAMAHA UNIVERSAL The Link-it system is designed to fit on any BRP, Polaris, Yamaha or Arctic Cat snowmobile Brackets Sold with hardware The bracket Base Kit (860201806) must...

ITEK Bracket Adapter without T-Slot Fuel - 335030

ONLY FITS ON MODELS WITHOUT T-SLOT, SKI-DOO 15 "AND LESS WIDTH, ARCTIC CAT ET YAMAHA UNIVERSAL The Link-it system is designed to fit on any BRP, Polaris, Yamaha or Arctic Cat snowmobile Brackets Sold with hardware The bracket Base Kit (860201806) must...

ITEK Bracket Adapter with T-Slot Fuel - 335026

ONLY FITS ON MODELS WITH T-SLOT The Link-it system is designed to fit on any BRP, Polaris, Yamaha or Arctic Cat snowmobile Brackets Sold with hardware The bracket Base Kit (860201806) must be purchased separately No drilling required for Polaris...

ITEK Bracket Adapter with T-Slot Fuel - 335025

ONLY FITS ON MODELS WITH T-SLOT The Link-it system is designed to fit on any BRP, Polaris, Yamaha or Arctic Cat snowmobile Brackets Sold with hardware The bracket Base Kit (860201806) must be purchased separately No drilling required for Polaris...

ITEK Bracket Adapter with T-Slot Fuel - 335023

ONLY FITS ON MODELS WITH T-SLOT The Link-it system is designed to fit on any BRP, Polaris, Yamaha or Arctic Cat snowmobile Brackets Sold with hardware The bracket Base Kit (860201806) must be purchased separately No drilling required for Polaris...

ITEK Bracket Adapter with T-Slot Fuel - 335022

ONLY FITS ON MODELS WITH T-SLOT The Link-it system is designed to fit on any BRP, Polaris, Yamaha or Arctic Cat snowmobile Brackets Sold with hardware The bracket Base Kit (860201806) must be purchased separately No drilling required for Polaris...

ITEK Bumper Powdercoat Series Rear - Fits Arctic cat - 333699

Powdercoat rear bumper with raised handle for better grips when the snowmobile is in deep snow Increase the rigidity of the tunnel Stainless steel hardware includedKimpex Data: Barcode: 779421887292 Supplier Number: PA02-AC-12-MS-153-VMKimpex Catalog...