Equipment & Supplies

Lee Bullet Mold 50 Cal 360 Gr Improved Minie

Lee Single Cavity Mold produces a .500 diameter, .940 length, 360 grain Minie bullet.

Lee Bullet Mold 50 Cal 354 Gr Modern Minie

  Lee Single Cavity Mold produces a .500 diameter 354 grain Minie bullet.

Lee Precision Large 8-32 Threaded Cutter W/Lock Stud

  This tool has a 8-32 threaded pin on one side that would screw into other manufacturer's case prep stations. The other end allows you to screw in our Case Length Gauge. Also includes the Lock Stud for use with the Shell Holders,...

Lee Precision 45/70 Quick Trim Die

Ideal for use with the Lee Deluxe Quick Trim Case Trimmer or Value Trim Case Trimmer the Quick Trim Rifle Die is threaded 7/8"-14 to work in all reloader presses that accept standard reloading dies.

Lee Quick Change Drum Set

Features four precision molded nylon drums: (2) small drums for charging 25 ACP to 223 Remington (2) large drums for charging the 223 Remington to Large Magnums. Also include an insert to allow reduced capacity charging similar to smaller drum...

Lee 2-Cavity Bullet Mold (.225 Diameter) 55Gr RF

Lee Double Cavity Mold produces a gas checked .225 diameter 55 grain round with flat bullet suitable for .22 cal cartridges. Handles included.

Lee 2-Cavity Bullet Mold (.358 Diameter) 200GR RF

Lee Double Cavity Mold produces a gas checked .358 diameter 200 grain round with flat bullet suitable for cartridges like 35 Remington, etc. Handles included.

Lee Precision 223 WSSM PaceSetter Full Length Two Die Set

Lee 223 WSSM Limited Production 2-Die Set includes a Full Length Sizing Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data  

Lee 2-Cavity Bullet Mold (.457 Diameter) Round Ball

Lee Precision Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds...

Lee Precision 300 Win Mag Quick Trim Die

Ideal for use with the Lee Deluxe Quick Trim Case Trimmer or Value Trim Case Trimmer the Quick Trim Rifle Die is threaded 7/8"-14 to work in all reloader presses that accept standard reloading dies.

Lee Precision 204 Ruger Quick Trim Die

Ideal for use with the Lee Deluxe Quick Trim Case Trimmer or Value Trim Case Trimmer the Quick Trim Rifle Die is threaded 7/8"-14 to work in all reloader presses that accept standard reloading dies.

Lee Precision Pro Auto-Disk Powder Measure

The Lee Pro Auto-Disk powder measure is perfect for the high volume reloader utilizing a progressive reloading press. It features an Elastomer wiper and teflon coated metal casing which makes it silky smooth to operate. The innovative design will not cut...

Lee Precision 300 WBY Mag Quick Trim Die

Ideal for use with the Lee Deluxe Quick Trim Case Trimmer or Value Trim Case Trimmer the Quick Trim Rifle Die is threaded 7/8"-14 to work in all reloader presses that accept standard reloading dies.

Lee Precision 300 H&H Magnum Quick Trim Die

Ideal for use with the Lee Deluxe Quick Trim Case Trimmer or Value Trim Case Trimmer the Quick Trim Rifle Die is threaded 7/8"-14 to work in all reloader presses that accept standard reloading dies.

Lee Precision 35 Rem Quick Trim Die

Ideal for use with the Lee Deluxe Quick Trim Case Trimmer or Value Trim Case Trimmer the Quick Trim Rifle Die is threaded 7/8"-14 to work in all reloader presses that accept standard reloading dies.

Lee Precision Large Case Trimmer Cutter W/Lock Stud

Lee's Simple, effective, and inexpensive solution to case trimming! the case cutter and locking stud combo makes trimming easy, without requiring lots of bench space. simply screw the caliber specific combination pilot and length gauge into the cutter,...

Lee 2-Cavity Bullet Mold 54 Caliber 300 Grain Bullet

Lee Precision Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds...

Lee Precision 375 H&H Quick Trim Die

Ideal for use with the Lee Deluxe Quick Trim Case Trimmer or Value Trim Case Trimmer the Quick Trim Rifle Die is threaded 7/8"-14 to work in all reloader presses that accept standard reloading dies.

Lee Precision 270 WSM Quick Trim Die

Ideal for use with the Lee Deluxe Quick Trim Case Trimmer or Value Trim Case Trimmer the Quick Trim Rifle Die is threaded 7/8"-14 to work in all reloader presses that accept standard reloading dies.

Lee Precision 338 Win Mag Quick Trim Die

Ideal for use with the Lee Deluxe Quick Trim Case Trimmer or Value Trim Case Trimmer the Quick Trim Rifle Die is threaded 7/8"-14 to work in all reloader presses that accept standard reloading dies.

Lee Precision 243 WSSM Case Length Gauge & Shell Holder

Lee Case Length Gauges are a precise and easy way to trim brass cases to length and square the case mouth. Gauge and shell holder requires a Lee Cutter and Lock Stud to function.Specifications and Features:Hardened Steel GaugeThreaded shell holder locks...

Lee 2-Cavity Bullet Mold (309 Diameter) 180 Gr RN

Lee Precision Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds...

Lee 2-Cavity Bullet Mold .285 Dia 130 Gr R

Lee 2-Cavity Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds...

Lee 2-Cavity Bullet Mold .452 228gr RN Bullet Mold

Lee Precision Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds...

Lee Precision 8x57 Mauser Quick Trim Die

Ideal for use with the Lee Deluxe Quick Trim Case Trimmer or Value Trim Case Trimmer the Quick Trim Rifle Die is threaded 7/8"-14 to work in all reloader presses that accept standard reloading dies.

Lee Precision 460 S&W Carbide Die Set

Lee 460 S&W Pistol 3-Die Set includes Carbide Full Length Sizing Die, Bullet Seating Die, Powder Thru Expanding Die, Powder Dipper and Instructions/Load Data.

Lee Precision 7.62x54R Quick Trim Die

Ideal for use with the Lee Deluxe Quick Trim Case Trimmer or Value Trim Case Trimmer the Quick Trim Rifle Die is threaded 7/8"-14 to work in all reloader presses that accept standard reloading dies.

Lee Precision 222 Rem Quick Trim Die

Ideal for use with the Lee Deluxe Quick Trim Case Trimmer or Value Trim Case Trimmer the Quick Trim Rifle Die is threaded 7/8"-14 to work in all reloader presses that accept standard reloading dies.

Lee Precision 6.5 x 55 Swed Quick Trim Die

Ideal for use with the Lee Deluxe Quick Trim Case Trimmer or Value Trim Case Trimmer the Quick Trim Rifle Die is threaded 7/8"-14 to work in all reloading presses that accept standard reloading dies.

Lee Precision 25/06 Rem Quick Trim Die

Ideal for use with the Lee Deluxe Quick Trim Case Trimmer or Value Trim Case Trimmer the Quick Trim Rifle Die is threaded 7/8"-14 to work in all reloader presses that accept standard reloading dies.

Lee Precision 303 Brit Quick Trim Die

Ideal for use with the Lee Deluxe Quick Trim Case Trimmer or Value Trim Case Trimmer the Quick Trim Rifle Die is threaded 7/8"-14 to work in all reloader presses that accept standard reloading dies.

Lee 2-Cavity Bullet Mold (379 Diameter) 250 Grain RF

Lee Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and...

Lee Precision 243 Win Quick Trim Die

Ideal for use with the Lee Deluxe Quick Trim Case Trimmer or Value Trim Case Trimmer the Quick Trim Rifle Die is threaded 7/8"-14 to work in all reloader presses that accept standard reloading dies.

Lee Precision 7mm WSM Case Length Gauge & Shell Holder

Lee Case Length Gauges are a precise and easy way to trim brass cases to length and square the case mouth. Gauge and shell holder requires a Lee Cutter and Lock Stud to function.Specifications and Features:Hardened Steel GaugeThreaded shell holder locks...

Lee Precision 357 Win Case Length Gauge & Shell Holder

Lee Case Length Gauges are a precise and easy way to trim brass cases to length and square the case mouth. Gauge and shell holder requires a Lee Cutter and Lock Stud to function.Specifications and Features:Hardened Steel GaugeThreaded shell holder locks...

Lee Precision 44Mag Case Length Gauge & Shell Holder

Lee Case Length Gauges are a precise and easy way to trim brass cases to length and square the case mouth. Gauge and shell holder requires a Lee Cutter and Lock Stud to function.Specifications and Features:Hardened Steel GaugeThreaded shell holder locks...

Lee Precision 7MM Rem Mag Quick Trim Die

7MM Rem Mag Quick Trim Die

Lee .429 Dia 200GR RF Double Cavity Mold

Lee Double Cavity Mold produces a .429 diameter 200 grain round with flat bullet suitable for cartridges like 44 Spec, 44/40, etc.

Lee Precision 22/250 Rem Quick Trim Die

22/250 QUICK TRIM DIE

Lee .530 Dia Double Cavity Round Ball Mold

Lee Double Cavity Mold produces a .530 Ball, 223.49 grains. Includes handles.

Lee Cutter with Ball Grip

Lee Cutter and Ball Grip makes case prep easier and more comfortable. Used with the Zip Trim

Lee .324 Dia 175gr 1R Double Cavity Mold

Lee Double Cavity Mold produces a .324 diameter 175 grain round nose bullet suitable for cartridges like 8MM.

Lee Loader 357 Sig 3 Die Set

Lee 357 Sig Pistol 3-Die Set includes Steel Full Length Sizing Die, Bullet Seating Die, Powder Thru Expanding Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.   *Lee resizing lubricant is required with this die set*

Lee Bench Plate

Lee Bench Plate allows for quick press removal without unbolting from bench. Includes 1 steel base block that fits all current Lee metallic presses. Special elevator bolt hardware included. Powder coated, thick steel mounts quickly and securely to any...

Lee Precision 30/30 Win Quick Trim Die

30/30 QUICK TRIM DIE

Lee Precision Universal Case Feeder

Lee Universal Case Feeder automates the case feeding operation on the Auto Breech Lock Pro, Pro 1000 and Load Master presses. Ships with four clear case feed tubes, Case Slider Block, Riser Block for taller cartridges, and Small and Large Feed Plate...

Lee Precision 7x64 Brenneke Case Gauge & Shell Holder

Lee 7X64 BRENNEKE Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim.

Lee Precision 270 Win Quick Trim Die

Ideal for use with the Lee Deluxe Quick Trim Case Trimmer or Value Trim Case Trimmer the Quick Trim Rifle Die is threaded 7/8"-14 to work in all reloader presses that accept standard reloading dies.

Lee 6.5/284 Case Gauge & Shell Holder

Lee 6.5/284W Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim

Lee Precision 325 WSM Case Gauge & Shell Holder

Lee 325 WSM Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim

Lee Precision 25 WSSM CASE GAUGE & SHELL HOLDER

Lee 25 WSSM Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim

Lee Precision 460 S&W CASE GAUGE & SHELL HOLDER

Lee 460 S&W Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim. Trim to length 1.780 to 1.800 inches.