Reloading Supplies

Lee Precision 25-35 Win 2-Die Set

Lee 25/35 Win Limited Production 2-Die Set includes a Full Length Sizing Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data  

Lee Precision 17 Rem 2-Die Set

Lee 17MM Limited Production 2-Die Set includes a Full Length Sizing Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.

Lee Precision 38-40 Win Die Set

Lee 38-40 Steel 3-Die Set. Includes Full Length Sizing Die, Bullet Seating Die, Powder Through Expanding Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.   Lee resizing lubricant is required with this die set.

Lee Precision 348 Win Die Set

Lee 348 Winchester PaceSetter 3-Die Set includes a Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data

Lee Precision 32 Win Spl 2-Die Set

Lee 32 Win Spl Limited Production 2-Die Set includes a Full Length Sizing Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data. 

Lee Precision 338 Lapua Factory Crimp Die (Large Series)

 Lee Large series (1 1/4x12 thread) 338 LAPUA Factory Crimp Die, used with the Classic Cast Press only, crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more...

Lee Precision 280 Rem Collet Die Set

Lee 7MM Express or 280 Remington Collet Die Set includes a Collet Die that uses a collet to squeeze a mandrel creating a precisely aligned case neck while reducing run out, Dead Length Bullet Seater Die, Shell Holder, Powder Dipper and Instructions/Load...

Lee Precision 30-30 Win Collet Die Set

Lee 30/30 Winchester Collet Die Set includes a Collet Die that uses a collet to squeeze a mandrel creating a precisely aligned case neck while reducing run out, Dead Length Bullet Seater Die, Shell Holder, Powder Dipper and Instructions/Load Data.

Lee Precision Auto Breech Lock Pro, Shell Plate #16

Auto Breech Lock Pro Shell Plate #16 Works with cartridges 480 Ruger, 500 Smith and Wesson

Claybuster 28 Ga 3/4 Oz Wads, 500 Pc

For use in 3/4 oz. Winchester HS, Remington, or Federal hulls. Optimum load is 3/4 oz. 500 Pc  WAA28HS

Claybuster 12 Ga 7/8 Oz to 1 1/8 Oz Wads, 500 Pc

For use in 7/8 to 1-1/8 oz. trap, skeet, sporting clays or hunting loads. Performs best in straight wall cases such as Federal paper or plastic and Fiocchi. Optimum load is 1 oz. 500 Pc  12S0

Lee Precision 7x57 Mauser Collet Die Set

Lee 7X57 Mauser Collet Die Set includes a Collet Die that uses a collet to squeeze a mandrel creating a precisely aligned case neck while reducing run out, Dead Length Bullet Seater Die, Shell Holder, Powder Dipper and Instructions/Load Data...

Lee Precision 6MM Collet Die Set

Lee 6MM Remington Collet Die Set includes a Collet Die that uses a collet to squeeze a mandrel creating a precisely aligned case neck while reducing run out, Dead Length Bullet Seater Die, Shell Holder, Powder Dipper and Instructions/Load Data.

Lee Precision 222 Rem Collet Die Set

Lee 222 Remington Collet Die Set includes a Collet Die that uses a collet to squeeze a mandrel creating a precisely aligned case neck while reducing run out, Dead Length Bullet Seater Die, Shell Holder, Powder Dipper and Instructions/Load Data.

Lee Precision 220 Swift Collet Die Set

Lee 220 Swift Collet Die Set includes a Collet Die that uses a collet to squeeze a mandrel creating a precisely aligned case neck while reducing run out, Dead Length Bullet Seater Die, Shell Holder, Powder Dipper and Instructions/Load Data.

Lee Precision 300 Ultra Mag Die Set

Lee 300 Ultra Mag PaceSetter 3-Die Set includes a Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data. 

Lee Precision Classic Sizing Kit for .323

Lee .323 BULLET SIZING KIT sizes cast bullets, also seats and crimps gas checks. Fits any standard 7/8x14 thread reloading press.

Lee Precision Safety Scale

Lee Safety Scale is reliable, very accurate and simple to use, beam is made from a tough Phenolic. Sensitive and readable to 1/20 grain

Lee Precision 7MM STW Die Set

Lee 7MM STW PaceSetter 3-Die Set includes a Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.

Lee Precision 223 WSSM Case Length Gauge & Shell Holder

Lee 223 WSSM Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim Trim to length 1.650 to 1.670 inches.

Claybuster CB 12 Ga, 7/8 Oz Wads, 500 Pc

For use in 7/8 to 1 oz. trap, skeet or sporting clay loads. Performs best in tapered hulls, Remington or Winchester. Optimum load is 7/8 oz.Featuring Lead-in Taper 500 Pc Bag  WAA12L

Claybuster CB 12 Ga, 3/4 Oz Wads, 500 Pc

For use in 3/4 oz. skeet, sporting clays or hunting loads. Versatile for most hulls depending on powder volume. Optimum load is 3/4 oz.Featuring Lead-in Taper 500 Pc Bag 

Lee Precision Pro 1000 Shell Plate #1

Lee Pro Shell Plate #1 for quick caliber change for the Pro 1000 Press. For the 38 Special, 357 Mag and similar cases.

Lee Precision Breech Lock Pro Shell Plate #11

Breech Lock Pro Shell Plate # 11 Works with cartridges:  44 Special, 44 Magnum, 45 Colt.

Lee Precision Pro 1000 45 ACP Press

Lee Pro 1000 progressive 3-Hole reloading kit for 45 ACP. Includes press, dies (Full Length Size, Powder Through Expanding and Bullet Seating Dies), 3-Hole Turret, #2 Shell Plate, Pro Auto-Disk Powder Measure, Universal Case Feeder and priming system...

Lee Precision Breech Lock Pro Shell Plate #4

Breech Lock Pro Shell Plate # 4  Works with cartridges:  222, 223, 380 Auto, 32 S&W Long, 32 H&R Magnum.

Lee Precision Breech Lock Pro Shell Plate #3

Breech Lock Pro Shell Plate # 3  Works with cartridges:  45 Winchester Mag.

Lee Precision 30 M1 Carbine Die Set

Lee 30M1 Pistol 3-Die Set includes Carbide Full Length Sizing Die, Bullet Seating Die, Powder Thru Expanding Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.   Lee case resizing lubricant is recommend for this cartridge.

Lee Precision 8x56R Case Length Gauge & Shell Holder

Lee 8x56 Hungarian-Mannlicher Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with Cutter and Lock Stud. Trim to length 2.195 to 2.210 inches

Lee Precision Powder Measure Stand

A real powder measure stand, not a cast or stamped bracket.  No need to bolt or screw this beefy stand to your work bench. Heavy powder coated steel stand compliments any brand or color powder measure. Works especially well with other...

Lee Precision Breech Lock Pro Shell Plate #1

Breech Lock Pro Shell Plate # 1  Works with cartridges: 38 Special, 357 Magnum, etc.

Lee Precision 38 S&W Carbide Die Set

Lee 38 S&W Pistol 3-Die Set includes Carbide Full Length Sizing Die, Bullet Seating Die, Powder Thru Expanding Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data. 

Lee Precision 450 Marlin Case Gauge & Shell Holder

Lee 450 MARLIN Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with Cutter and Lock Stud.   Trim to length 2.080 to 2.100 inches.

Lee Precision 7MM Express (280 Rem) Die Set

  Lee 280 Remington 3-Die Set includes a Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data

Lee Precision 7mm Rem Mag Pacesetter Full Length Three Die Set

Lee Precision Pacesetter die sets are the Staple of their die lineup, featuring high quality manufacturing and high precision tolerances at an affordable price. Lee Precision Pacesetter 3 die steel rifle sets include a full-length sizing die, powder...

Lee Precision Die Lock Rings 3/Pkg

Lee Billet Aluminum Lock Rings are easy to adjust, just finger tighten, holds the adjustment rock solid. Package of 3

Lee Precision R12 Universal Shell Holder #12

Lee R12 Universal shell holder used in most brands of reloading presses. For 22 PPC, 6 PPC, 7.62x39 and similar cases. 

Lee Precision R11 Universal Shell Holder #11

Lee R11 Universal shell holder used in most brands of reloading presses. For 303 Savage, 444 Marlin, 44 Special/ Mag, 45 Colt and similar cases. 

Lee Precision R10 Universal Shell Holder #10

Lee R10 Universal shell holder used in most brands of reloading presses. For 220 Swift, 6.5 Jap, 7x64 Brenneke and similar cases.

Lee Precision R9 Universal Shell Holder #9

Lee R9 Universal shell holder used in most brands of reloading presses. For 41 Mag and similar cases.

Lee Precision R8 Universal Shell Holder #8

Lee R8 Universal shell holder used in most brands of reloading presses. For 33 Win, 348 Win, 40/65, 45/70 and similar cases.

Lee Precision R7 Universal Shell Holder #7

Lee R7 Universal shell holder used in most brands of reloading presses. For 30 M-1, 32 ACP and similar cases.

Lee Precision R6 Universal Shell Holder #6

Lee R6 Universal shell holder used in most brands of reloading presses. For 218 Bee, 25/20, 32/20 and similar cases.

Lee Precision R5 Universal Shell Holder #5

Lee R5 Universal shell holder used in most brands of reloading presses. For WSM`s, 7mm Rem Mag, 303 British, 480 Ruger and similar cases.  

Lee Precision R4 Universal Shell Holder #4

Lee R4 Universal shell holder used in most brands of reloading presses. For the 17 Rem, 204 Ruger, 221 Fireball, 222 Rem,  223 Rem, 7mm TCU and similar cases. 

Lee Precision R2 Universal Shell Holder #2

Lee R2 Universal shell holder used in most brands of reloading presses. For the 25/06, 7mm/08, 8x57 Mauser, 45 ACP and similar cases. 

Lee Precision R1 Universal Shell Holder #1

Lee R1 Universal shell holder used in most brands of reloading presses. For the 38 Long & Short Colt, 38 Special, 357 Mag and similar cases. 

Lee Pacesetter 3-Die Set 308 Win

Lee 308 Winchester Pacesetter 3-Die Set includes Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.

Lee Precision 32Win SPL Case Length Gauge & Shell Holder

Lee 32 WIN SPL Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with Cutter and Lock Stud. Trim to length 2.020 to 2.040 inches.

Lee Precision 7x57 Mauser Quick Trim Die

Ideal for use with the Lee Deluxe Quick Trim Case Trimmer or Value Trim Case Trimmer the Quick Trim Rifle Die is threaded 7/8"-14 to work in all reloader presses that accept standard reloading dies.

Lee Precision 6MM Creedmoor PaceSetter Full Length 3 Die Set

Lee 6mm Creedmoor PaceSetter 3-Die Set includes a Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data 

Lee Bullet Mold 54 Cal 410 Gr Improved Minie

Lee Single Cavity Mold produces a .533 diameter 410 grain Minie bullet.