Spuhr

SPUHR ISMS MOUNT Ø34 H30MM/1.181” 0MIL PIC GEN3

Spuhr’s SP-4001C is an ideal choice for mounting high-powered optics onto bolt-action rifles with one-piece picatinny rail mounts. The SP-4001C is precision machined from a solid billet of 7000 series aluminum, and features a hardcoat...

SPUHR ISMS MOUNT Ø34 H30MM/1.181” 0MIL PIC FDE

The ideal scope mount system series of mounts feature seven set of interfaces to attach any of more than 40 different accessories, and has a bubble level integrated in the rear plane of the mount body to prevent canting of the rifle.The rings are...

SPUHR ISMS MOUNT Ø34 H30MM/1.18 6MIL PIC FDE

Upgrade your Accuracy International Rifle with Spuhr’s 34mm AI Unimount! This mount is compatible with Accuracy International rifles with 11mm dovetail mounts, and comes packed with features to enhance accuracy. The rings are diagonally cut for...

SPUHR ISMS MOUNT Ø34 H30MM/1.18” 6MIL PIC

Upgrade your Accuracy International Rifle with Spuhr’s 34mm AI Unimount! This mount is compatible with Accuracy International rifles with 11mm dovetail mounts, and comes packed with features to enhance accuracy. The rings are diagonally cut for...

SPUHR ISMS MOUNT Ø30 H38MM/1.5” 6MIL QDP

Quick detachable mount featuring side clamp and dual levers on the left side of the mount, with tensioning screws on opposite side of the mount body.6 MIL/20.6 MOAHeight: 38 mm/1.5”Length: 126 mm/4.96” (mount body only)Weight: 270 g/9.5...

SPUHR ISMS MOUNT Ø30 H38MM/1.5” 6MIL PIC FDE

Upgrade your long range shooting setup with Spuhr’s SP-3602 34mm Unimount! This advanced scope mounting interface features a considerable centerline height of 1.5 inches, a perfect height for mounting scopes with larger objective lens diameters, or...

SPUHR ISMS MOUNT Ø30 H38MM/1.5” 6MIL PIC

Upgrade your long range shooting setup with Spuhr’s SP-3602 34mm Unimount! This advanced scope mounting interface features a considerable centerline height of 1.5 inches, a perfect height for mounting scopes with larger objective lens diameters, or...

SPUHR ISMS MOUNT Ø30 H38MM/1.5” 0MIL QDP

Quick detachable mount featuring side clampand dual levers on the left side of the mount,with tensioning screws on opposite side ofthe mount body.0 MIL/0 MOAHeight: 38 mm/1.5”Length: 126 mm/4.96” (mount body only)Weight: 270 g/9.5...

SPUHR ISMS MOUNT Ø30 H38MM/1.5” 0MIL PIC

    0 MIL/0 MOAHeight: 38 mm/1.5”Length: 126 mm/4.96”Weight: 264 g/9.3 oz Rail/Type: Picatinny Tube Diameter: 30 mm   10-degree wedge includedNote: Will not fit the SAKO S20 or rifles with 2-piece rails. As of fall 2023, rear...

Spuhr Unimount 30mm 7MIL/24MOA 1.378" Sako TRG Scope Mount ST-3701

Spuhr’s ST-3701 Unimount is the perfect mounting solution for Sako TRG-22/TRG-42 and Tikka T3x rifles equipped with dovetail mounting rails. The ST-3701’s overall design has been optimized for durability, ease of use and...

SPUHR ISMS MOUNT Ø30 H34MM/1.35” 0MIL QDP

Upgrade your long range shooting setup with Spuhr’s 30mm Quick-Detach Mount System! This versatile scope mount is equipped with eight sets of interfaces to attach over 40 different accessories providing almost unlimited customization...

SPUHR ISMS MOUNT Ø30 H30MM/1.181” 6MIL PIC

Spuhr’s SP-3601 Unimount was built for rifles equipped with MIL-STD 1913 or STANAG 4694 rails, but works especially well on bolt action rifles with one-piece rails. The SP-3601’s overall design has been optimized for durability, ease of use...

SPUHR ISMS MOUNT Ø30 H30MM/1.181” 0MIL PIC

Spuhr’s SP-3001 Unimount was built for rifles equipped with MIL-STD 1913 or STANAG 4694 rails, but works especially well on bolt action rifles with one-piece rails. The SP-3001’s overall design has been optimized for durability, ease of use...

SPUHR ISMS CANTILEVER MOUNT Ø34 H38mm/1.5” 0MIL QD

Quick detachable cantilever mount featuring side clamp and dual levers on the left side of the mount, with tensioning screws on opposite side of the mount body. Absolute co-witness most clip-on NV units on AR platforms. Allows the scope to be mounted 40...

SPUHR ISMS CANTILEVER MOUNT Ø30 H48MM/1.89” 0MIL PIC GEN3

Extended high cantilever mount intended for use on AR-platforms with illuminators mounted on top of the handguard. Allows the scope to be mounted 70 mm/2.76” farther forward than with a non-cantilever mount.0 MIL/0 MOAHeight: 48 mm/1.89"Length: 140...

SPUHR ISMS CANTILEVER MOUNT Ø30 H38MM/1.5” 0MIL PIC

The IDEAL SCOPE MOUNT SYSTEM series of mounts feature seven set of interfaces to attach any of more than 40 different accessories. The rings are diagonally cut for increased visibility of the elevation and windage turrets. The mounts are machined from...

SPUHR INTERFACE RAIL COVER SET

Set of 3 nylon rail covers for use on Spuhr MP5, G3, and other forends with Spuhr Interfaces. The covers attach to the rail using the enclosed screws, and the covers can be cut to length depending on individual needs. The included M4x8 Torx...

SPUHR HUNTING MOUNT Ø34 H34MM/1.35” 0MIL PIC

Our new Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts.The SCP-4006 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated...

SPUHR HUNTING MOUNT Ø34 H30MM/1.18” 0MIL PIC

Our new Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts.The SCP-4001 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated as...

SPUHR HUNTING MOUNT Ø30 H34MM/1.35” 0MIL TRG

Our new Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts.The SCT-3006 is designed for the Tikka T3X, but will also fit on the SAKO TRG 22/42, and features one classic ring and one...

SPUHR HUNTING MOUNT Ø30 H34MM/1.35” 0MIL PIC

Our new Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts.The SCP-3006 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated...

SPUHR HUNTING MOUNT Ø30 H30MM/1.18” 0MIL TRG

Our new Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts.The SCT-3001 is designed for the Tikka T3X, but will also fit on the SAKO TRG 22/42, and features one classic ring and one...

SPUHR HUNTING MOUNT Ø30 H30MM/1.18” 0MIL PIC

Our new Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts.The SCP-3001 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated as...

SPUHR HUNTING MOUNT Ø30 H25.4MM/1” 0MIL PIC

Our new Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts.The SCP-3000 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated...

SPUHR HAWK HILL CUSTOM D.O.P.E. CARD HOLDER

The Hawk Hill Custom "RMD" or Rifle Mounted Data-Holder, also known as a D.O.P.E. card holder (D.O.P.E. = Data Observed from Previous Engagements), is designed to revolutionize target data management. The flexible design with multi axis rotation allows...

SPUHR FIX IT STICKS

Fix It Sticks Spuhr-specific torque kit containing two Fix It sticks, a 18 in/lb and a 45 in/lb torque limiter, and two each of standard length and extended length Torx 20 bits.Delivered in slim soft pouch with Velcro panel and PALS.Includes an Approved...

SPUHR DOCTER/VENOM INTERFACE

Interface for attaching Docter/Noblex and Burris FastFire (1 through 4) sights to the ISMS-series scope mount. Includes screws. The A-0011 footprint also matches the following, though screw head sizing may vary: • Docter/Noblex Sight C / Sight 2+ /...

SPUHR DOCTER/VENOM HUNTING INTERFACE

Interface for attaching Docter/Noblex and Burris FastFire (1 through 4) sights to the Hunting Series mounts and rings. Includes screws.The H-0011 footprint also matches the following, though screw head sizing may vary: • Docter/Noblex Sight C /...

SPUHR DELTAPOINT INTERFACE

Interface for attaching a Leupold DeltaPoint to the scope mount. Includes screws.The A-0009 footprint also matches the following, though screw head sizing may vary: Firepoint Tasco Optima Trijicon RedDot Some Shield Mini Sight, JPoints, and US Optics...

SPUHR CANTILEVER HUNTING MOUNT Ø30 H38MM/1.5” 0MIL PIC

The Hunting Series version of the SP-3022. The SCP-3022 is designed for use on Picatinny rails and features one classic ring and one interface ring, which can be rotated as to position the interface/accessory in either the 12-o'clock or 3-o'clock...

SPUHR BUBBLE LEVEL ASSEMBLY

External Bubble Level Assembly designed to attach forward on the scope mount body or ring. Perfect solution for shooters who are unable to focus on the built-in level in the standard ISMS series or who has a model without a built-in level.The angle of...

SPUHR ANGLED UNIVERSAL INTERFACE

Intermediary interface for attaching any of our accessory interfaces or Picatinny rails at a 20-degree angle in relation to the side of an ISMS scope mount, SICS chassis, etc. Can be mounted for left-handed use.Includes screws.Weight: 33 g/1.2 ozNote:...

SPUHR AIMPOINT T1/T2 MOUNT, LOWER 1/3, 42MM/1.65

HRT is engraved on the side as a part of a special run of mounts for FBI Hostage Rescue Team. This is the same mount as the SM-2007B, but with the HRT engraving. The worlds most rugged Aimpoint Micro/CompM5 mount. Attaches to any Picatinny or...

SPUHR AIMPOINT T-2 MOUNT H57mm/2.25″ PIC

Our new light-weight tough-as-nails formfactor!Height: 57 mm/2.25" (with Aimpoint Micro T-2/CompM5)Length: 57.5 mm/2.26"Weight: 86 g/3.0 oz Interface: Picatinny Rail Footprint: Aimpoint MicroCompatible with the A-0229 Picatinny Rail 75 mm, RD/F for use...

SPUHR AIMPOINT T-2 MOUNT H49MM/1.93″ 0MIL PIC

The worlds most rugged Aimpoint Micro/CompM5 mount. Attaches to any Picatinny or STANAG NATO rail with the use of two Tx20.Features Spuhr interfaces on the non-clamping side.Height: 49 mm/1.93" (with Aimpoint Micro T-1)Weight: 111 g/3.9 ozFits the...

SPUHR AIMPOINT T-2 MOUNT H39mm/1.53″ PIC

Our new light-weight tough-as-nails formfactor! 17 g/0.6 oz lighter than the SM-2007!   The Spuhr RD Aimpoint T-2 H39mm/1.53" Absolute Co-Witness Red Dot Picatinny Mount RD-20153 is a robust and lightweight mount designed for Aimpoint Micro series...

SPUHR AIMPOINT T-2 MAGNIFIER MOUNT H57mm/2.25″ PIC

The Spuhr Aimpoint T-2 H57mm/2.25" PIC Magnifier Mount RDF-20225K is a robust and lightweight mount designed for use with Aimpoint T-2 red dot sights and magnifiers. With a height of 57mm (2.25 inches), it provides an optimal viewing angle and alignment...

SPUHR AIMPOINT MICRO MOUNT, LOWER 1/3, 42MM/1.65” QD

The worlds most rugged Aimpoint Micro/CompM5 mount. Our unique design incorporates recoil lugs front and aft allowing for a more secure hold on the sight.Attaches to any Picatinny or STANAG NATO rail with the use of an adjustable QDP lever.Lower 1/3...

SPUHR AIMPOINT MICRO MOUNT, ABSOLUTE, 38MM/1.5” QD

Base Center Height:1.5" Fits Manufacturer:Aimpoint Mount Height:Absolute Co-Witness This Quick Detach Red Dot Mount is compatible with the following optics: Aimpoint CompM5 Aimpoint Micro H-1 Aimpoint Micro H-2 Aimpoint Micro T-1 Aimpoint Micro...

SPUHR AIMPOINT MICRO MOUNT, ABSOLUTE, 38MM/1.5

Spuhr delivers extreme durability and a wide range of customization options with the Sm-2007 Micro Mount! This mount compatible with Aimpoint's Micro Red Dots (or other red dots with the same footprint), and is perfect for flattop AR-type platforms...

SPUHR AIMPOINT MICRO MOUNT, 30MM/1.18” QD

The Spuhr Aimpoint Micro Picatinny Red Dot Mount with QDP Lever is the world's most rugged mount for Aimpoint Micro/CompM5 sights. Designed to attach to any Picatinny or STANAG NATO rail, it features an adjustable QDP lever for secure mounting. With a...

SPUHR AIMPOINT MICRO MOUNT, 30MM/1.18”

The worlds most rugged Aimpoint Micro/CompM5 mount. Attaches to any Picatinny or STANAG NATO rail with the use of two Tx20 screws.Features Spuhr interfaces on the non-clamping side.Height: 30 mm/1.18" (with Aimpoint Micro T-1. 40 mm/1.57" with Aimpoint...

SPUHR AIMPOINT MICRO MOUNT, 22MM/0.866”

The worlds most rugged Aimpoint Micro/CompM5 mount. Attaches to any Picatinny or STANAG NATO rail with the use of two Tx20 screws.Not intended for use on AR-systems as this mount will position the red dot lower than the iron sights.Height: 22 mm/0.866"...

SPUHR AIMPOINT MICRO INTERFACE, RIGHT

Interface for attaching Aimpoint Micro, HoloSun HS403, or Vortex SPARC® AR red dot sight to the right side of the ISMS scope mount (4:30-position). Includes screws.

SPUHR AIMPOINT MICRO INTERFACE, LEFT

Interface for attaching Aimpoint Micro red dot sight to the left side of the ISMS scope mount (7:30-position). The A-0025B is also suitable for: Aimpoint CompM5 Actus Core-2 1x20 Athlon Midas TSR2 Blaser RD 17 HoloSun HS403 and Paralow 403 (except the...

SPUHR Aimpoint CompM4 Mount, Absolute, H39mm/1.535″ QD

Quick detachable mount for Aimpoint Comp®M4, Absolute Co-Witness Attaches to any Picatinny or STANAG NATO rail with the use of an adjustable QDP lever.Absolute Co-witnessHeight: 39 mm/1.535"Weight: 108 g/3.8 oz   Color: Black Hardcoat...

SPUHR AIMPOINT ACRO INTERFACE

Interface for attaching the Aimpoint ACRO C-1, C-2, P-1, and P-2 red dot sights to our Hunting Series rings and mounts and to our ISMS scope mounts. Includes screws.Will also fit the Steiner MPS.Weight: 20 g/0.7 oz

SPUHR AESTHETIC MOUNT Ø30 H30MM/1.18” 0MIL TRG

Our new Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts.The SCT-3001 is designed for the Tikka T3X, but will also fit on the SAKO TRG 22/42. The SCT-3001A version features two classic...

SPUHR AESTHETIC MOUNT Ø30 H30MM/1.18” 0MIL PIC

Our new Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts.The SCP-3001 is designed for use on Picatinny rails and features two classic rings. The SCP-series of mounts can also be rotated...

SPUHR ACI INTERFACE

Interface for attaching Sniper Tools and Nightforce Angle Cosine and Angle Degree Indicators to ISMS scope mount or rings. The ACI is held in place against the A-0023 by two M3 Torx 10 screws, requiring the ACI to be attached or removed using a Torx 10...

SPUHR 7 MM LEVEL

7 mm bubble level for unimount. Rubber gaskets included (2 pcs). Note: Will not fit SR-series of rings.

SPUHR 7 MM GREEN LEVEL

7 mm green bubble level for unimount. Rubber gaskets included (2 pcs). Note: Will not fit SR-series of rings.