3256 results for benz note 3

TruGlo Marlin Adjustable Rifle Sight Set

Replaces existing factory sights Full windage and elevation adjustment CNC-machined Not for carbine barrels Front diameter is .060"

Gun Dust Brush, New, Surplus

A new, surplus brush for cleaning the dust off your firearm. Approximately 2.5 inches in length, designed to fir inside a small military cleaning kit. Please note that this is a representative...

SPUHR PICATINNY RAIL 8X55MM

This picatinny rail is compatible with Spuhr fore-end interfaces   Height: 8 mm/0.315" Length: 55 mm/2.16" Weight: 15 g/0.5 oz   Note: Not for use on ISMS or Hunting Series mounts.

Russian Mauser 98 Cleaning Kit, Surplus

A surplus Russian/Soviet cleaning kit for the Mauser 98 rifle. Includes two-compartment oil bottle, chamber brush, pull-through and muzzle protector. Please note that this is a representative...

Kimpex 4500 lbs Winch IP 67 Kit, Distance Remote 458245

Pulling capacity 4500 lb. (2041 kg) Permanent magnet motor 12V DC 1.4 HP Cable length 39.4’ (12.8m), 3/16" diameter (6mm) Aluminium hawse 6 gauge wires Longer wires on the main harness to connect to...

SVT40 Sight Tool, Surplus

A surplus SVT40 sight tool that allows for the adjustment of the elevation of the foresight for proper zeroing of the rifle. The condition varies and the item may have surface rust and other stains...

TruGlo FAT BEAD 5-40 Fiber Optic Green

Truglo's Fat Bead sight is a large diameter replacement bead for your shotgun. Its frame is CNC-machined from steel with a black finish. *Note- Designed ONLY to be installed on a shotgun barrel with...

Vortex Hunter 30mm High Mount Ring Set of 2

Mounting to a Picatinny or Weaver type rail, the standard, 2-screw Hunter rings are a nice match for general hunting setups.Made from aircraft-grade 6061-T6 aluminum for optimum strength...

Soviet Mosin-Nagant Cleaning Rod Handle, Surplus

A surplus Soviet Mosin-Nagant cleaning rod handle, part of the issued cleaning kit. The condition varies and the item may have surface rust and other stains. Please note that these are representative...

Soviet Mosin-Nagant Cleaning Rod Head, Surplus

A surplus Soviet Mosin-Nagant cleaning rod head, part of the issued cleaning kit. The condition varies and the item may have surface rust and other stains. Please note that these are representative...

SVT40 Gas Port Punch, Surplus

A surplus SVT40 gas port punch for removing carbon fouling from the gas port. The condition varies and the item may have surface rust and other stains. Please note that these are representative...

Soviet Mosin-Nagant Cleaning Rod Muzzle Guide, Surplus

A surplus Soviet Mosin-Nagant cleaning rod muzzle guide, part of the issued cleaning kit. The condition varies and the item may have surface rust and other stains. Please note that these are...

Grovtec Hammer Extension for Browning BLR 92

GTHM-285 | Grovtec Browning BLR 1992 -1995 hammer extension to fit your firearm with an exposed hammer after you mount a scope. Not for use on folding hammers.   Note: Due to the varying dimensions...

SPUHR TRIJICON RMR/SRO INTERFACE

Interface for attaching Trijicon RMR Type 1 and 2 and Trijicon SRO to an ISMS scope mount. Includes shim plate and screws. The A-0010 footprint also matches the following, though screw sizing may...

Vortex 30mm Extra High Absolute Co-Witness Tactical Ring

The Vortex Tactical 30mm Extra-High riflescope ring mounts on Picatinny type rails—positioning the center of the riflescope tube at a height of 1.46 inches (37mm) from the base for absolute...

Mosin-Nagant Combination Tool and Gauge, Surplus

A surplus Mosin-Nagant combination tool that combines a screwdriver, wrench for the cleaning rod tools and firing-pin protrusion gauge. The condition varies and the item may have surface rust and...

EOTECH EXPS2 HOOD SERVICE KIT BLK

(1) EXPS2 Series Hood(3) Hood Screws w/ Loctite(1) Tether(3) Restraining Beads

Soviet Mosin-Nagant and SVT40 Oiler, Surplus

A surplus Soviet Mosin-Nagant and SVT40 two-compartment oiler, made to contain oil in one compartment and bore cleaner in the other. The condition varies and the item may have surface rust and other...

EOTECH XPS HOOD SERVICE KIT BLK

Includes: (1) XPS Series Hood (3) Hood Screws w/ Loctite (1) Tether (3) Restraining Beads

TactaLoad Flash-5 Tactical Forend and Gunstock 12ga Combo, Wetland Camo, Remington

The TactaLoad Combo Pack pairs the new TACTICAL FOREND with the award winning* FLASH-5 gunstock. The FLASH-5 provides shooters with five, readily accessible shells while improving the shotgun’s...

Hornady Case Neck Brush 270 Caliber to 7mm

The Hornady Case Neck brush is perfect for cleaning dirt and powder residue from inside necks and simultaneously lubricate for expansion. Technical Information Material: Bronze Fits: 270 Caliber,...

MRA Rock Solid Muzzle Brake 9mm, 1/2x28

Soviet Mosin-Nagant Jag, Surplus

A surplus Soviet Mosin-Nagant cleaning kit jag, it threads onto the cleaning rod for swabbing the bore using patches or pieces of rope. The condition varies and the item may have surface rust and...

Lee Precision 500 S&W Collet Style Crimp Die

500 S&W Collet Style Crimp Die. Incorporates a collet to apply a rifle type crimp to the case. Makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove,...

SPUHR PICATINNY TRI-RAIL SHORT

Interface for attaching 3rd party accessories with Picatinny clamps to the top and sides of a 34 mm ISMS scope mount. Fits around the front ring on 34 mm mounts.  

Scotty Stoppers for Line Releases & Auto Stop, 6 Pack - Black & Yellow

Moulded nylon Stopper Beads for the auto stop and locating line releases  Includes 6 per pack (3 black and 3 yellow)  

Hornady Case Lube Pad and Reloading Tray

The Hornady Case Lube Pad and Reloading tray is the perfect addition to any reloading bench. Apply sizing lube to the pad, then roll cases over the pad. Technical Information Function: Pad to...

Grovtec Hammer Extension for Win 94S, Ithaca X-Caliber, Blk

Hammer extension to fit your firearm with an exposed hammer after you mount a scope. Note: Due to the varying dimensions of hammers, minor fitting may be required GTHM-68 | Winchester 94s and Big...

Hoppe's Elite Pierce Point Cleaning Jag, .17-.20 Cal Rifles - Female Ended

Use to push patches through your muzzle for the deepest clean Extra-durable, pierce point design Threaded 8/32 for the Hoppe’s Elite Cleaning Rod System and others .17-.20cal Rifles - Fe

Canuck Recon 2 & Recon 3,10 Round Magazine, 12 Ga

10 round magazine for the Canuck Recon 2 and Recon 3. This magazine does NOT fit the FD12, MK12, ETC it only fits in the Recon 2 and Recon 3.    

SPUHR ISMS MOUNT Ø34 H38MM/1.5″ 13MIL PIC GEN3

The Spuhr Unimount 34mm 13 MIL/44.4 MOA 1.5" Gen 3 Picatinny Scope Mount SP-4802C, is a precision-engineered Picatinny scope mount designed for optimal performance. With a versatile 1.5-inch...

EGE ARMS CG12 12GA 28″ Barrel, Adjustable Stock

EGE ARMS CG12 SIDE BY SIDE SHOTGUN,  12GA/3",  BLACK,  28" BBL,  SINGLE TRIGGER,  STEEL FRAME,  ADJ. TURKISH WALNUT STOCK,  3-MC  

SPUHR TRIJICON RMR/SRO HUNTING INTERFACE

Interface for attaching Trijicon RMR Type 1 and 2 and Trijicon SRO to Hunting Series mounts and rings. Includes screws.As the H-series of accessories are designed for our Hunting Series the finish is...

Click N GO Steel Wear Bar 273973

Available in 5 lengths of blade: 50" 54" 60" 66" 72" Please note that #273973 is composed of 2 x 36” piecesKimpex Data: Barcode: 779420698301 Supplier Number: 7810116-20EKimpex Catalog Number:...

SPUHR ANGLED UNIVERSAL INTERFACE

Intermediary interface for attaching any of our accessory interfaces or Picatinny rails at a 20-degree angle in relation to the side of an ISMS scope mount, SICS chassis, etc. Can be mounted for...

Click N GO Steel Wear Bar 072270

Available in 5 lengths of blade: 50" 54" 60" 66" 72" Please note that #273973 is composed of 2 x 36” piecesKimpex Data: Barcode: 779420240678 Supplier Number: 7810111-0007EKimpex Catalog Number:...

Leupold Ringmounts Sako 30 mm, Medium Matte Set

Use as a high-quality alternative to ringmounts sold by firearms manufacturers and as a no-tap mounting method. Because these rings are machined from solid steel, they offer superior integrity and...

Hoppe's No. 9 Aluminum Cleaning Rod, Rifle Set, .22 Caliber

3-piece aluminum rod and slotted ends  

EGE ARMS CG12 12GA SHORT, 12″ Barrel, Mlok Alu handguard

EGE ARMS CG12-TAC SIDE BY SIDE SHOTGUN W/HAMMER, 12GA/3″, BLACK, 12.2″ BBL, BLACK WOOD, STEEL FRAME, METAL FOREND, 3-MC  

Grovtec Hammer Extensions - Browning BLR 1981-1991

Hammer extensions to fit your firearm with an exposed hammer after you mount a scope. Note: Due to the varying dimensions of hammers, minor fitting may be required.  GTHM-73 | Browning BLR 1981-1991...

Grovtec Hammer Extensions - Marlin Lever Action 1983 & later

Hammer extensions to fit your firearm with an exposed hammer after you mount a scope. Note: Due to the varying dimensions of hammers, minor fitting may be required.  GTHM-74 | All Marlin Lever...

Canuck Defender 12 Ga, Pump Action, 14"brl, Marine/Black

Specifications: Gauge: 12 Gauge Chamber: 2-3/4" or 3" Capacity: 4+1 Sights: Fixed Front Barrel Length: 14" Choke: F,M,C Stock: Synthetic

Canuck Defender 12 Ga, Pump Action, 14" Brl, Marine/Walnut

Specifications: Gauge: 12 Gauge Chamber: 2-3/4" or 3" Capacity: 4+1 Sights: Fixed Front Barrel Length: 14" Choke: F,M,C Stock: Walnut

SPUHR TOP COVER SCREWS (20-PACK)

A-0132 M4x10 Tx20 screws for new style top covers (20-pack). The 10.9 Grade steel screws are zinc-nickel treated (for corrosion protection) and are pre-coated with Gleitmo 627 dry lubricant film to...

CVA Knuckle Saver Bullet Starter

The KnuckleSaver™ Bullet Starter solves these problems. The KnuckelSaver starter engages the bullet around the point securley, making it easy to load even the toughest bullets. The built in...

Hawke Sunshade, 42mm Objective

The Hawke riflescope sunshade reduces glare and helps to cut down internal reflections. Measuring 4 inches (100mm) long, tube sunshades are threaded on each end enabling them to be stacked...

Primos Hoot Flute Owl Call

The Hoot Flute™ is easy to use. In the spring, sounding like an owl can very often entice a gobbler to give away his location by gobbling back at you. You can then move closer and, using turkey...

Lee Precision Pro 1000 45 ACP Press

Lee Pro 1000 progressive 3-Hole reloading kit for 45 ACP. Includes press, dies (Full Length Size, Powder Through Expanding and Bullet Seating Dies), 3

RCBS Stuck Case Remover-2

A valuable tool for the extraction of cases from dies with removable guide bushings. Useful for RCBS Competition Dies or other sizer dies with a raised expander ball. Kit contains two extractor nuts...

Kolpin Rhino Grip XL Gun Grip Double

The first fully adjustable grip that doesn’t require tools. Designed to fit ATVs, UTVs, RVs, SUVs, trucks and trailers. Up to 20 lbs. of carrying strength for your medium-weight gear. Strong, rubber...

SPUHR HUNTING MOUNT Ø34 H34MM/1.35” 0MIL PIC

Our new Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts.The SCP-4006 is designed for use on Picatinny rails and features one...

SPUHR HUNTING MOUNT Ø30 H30MM/1.18” 0MIL TRG

Our new Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts.The SCT-3001 is designed for the Tikka T3X, but will also fit on the SAKO...