Spuhr

SPUHR ISMS MOUNT Ø30 H38MM/1.5” 0MIL PIC

    0 MIL/0 MOAHeight: 38 mm/1.5”Length: 126 mm/4.96”Weight: 264 g/9.3 oz Rail/Type: Picatinny Tube Diameter: 30 mm   10-degree wedge includedNote: Will not fit the SAKO...

Spuhr Unimount 30mm 7MIL/24MOA 1.378" Sako TRG Scope Mount ST-3701

Spuhr’s ST-3701 Unimount is the perfect mounting solution for Sako TRG-22/TRG-42 and Tikka T3x rifles equipped with dovetail mounting rails. The ST-3701’s overall...

SPUHR ISMS MOUNT Ø30 H34MM/1.35” 0MIL QDP

Upgrade your long range shooting setup with Spuhr’s 30mm Quick-Detach Mount System! This versatile scope mount is equipped with eight sets of interfaces to attach over 40 different...

SPUHR ISMS MOUNT Ø30 H30MM/1.181” 6MIL PIC

Spuhr’s SP-3601 Unimount was built for rifles equipped with MIL-STD 1913 or STANAG 4694 rails, but works especially well on bolt action rifles with one-piece rails. The SP-3601’s overall...

SPUHR ISMS MOUNT Ø30 H30MM/1.181” 0MIL PIC

Spuhr’s SP-3001 Unimount was built for rifles equipped with MIL-STD 1913 or STANAG 4694 rails, but works especially well on bolt action rifles with one-piece rails. The SP-3001’s overall...

SPUHR ISMS CANTILEVER MOUNT Ø34 H38mm/1.5” 0MIL QD

Quick detachable cantilever mount featuring side clamp and dual levers on the left side of the mount, with tensioning screws on opposite side of the mount body. Absolute co-witness most clip-on NV...

SPUHR ISMS CANTILEVER MOUNT Ø30 H48MM/1.89” 0MIL PIC GEN3

Extended high cantilever mount intended for use on AR-platforms with illuminators mounted on top of the handguard. Allows the scope to be mounted 70 mm/2.76” farther forward than with a...

SPUHR ISMS CANTILEVER MOUNT Ø30 H38MM/1.5” 0MIL PIC

The IDEAL SCOPE MOUNT SYSTEM series of mounts feature seven set of interfaces to attach any of more than 40 different accessories. The rings are diagonally cut for increased visibility of the...

SPUHR INTERFACE RAIL COVER SET

Set of 3 nylon rail covers for use on Spuhr MP5, G3, and other forends with Spuhr Interfaces. The covers attach to the rail using the enclosed screws, and the covers can be cut to length...

SPUHR HUNTING MOUNT Ø34 H34MM/1.35” 0MIL PIC

Our new Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts.The SCP-4006 is designed for use on Picatinny rails and features one...

SPUHR HUNTING MOUNT Ø34 H30MM/1.18” 0MIL PIC

Our new Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts.The SCP-4001 is designed for use on Picatinny rails and features one...

SPUHR HUNTING MOUNT Ø30 H34MM/1.35” 0MIL TRG

Our new Hunting Series of mounts - offering a more attractive and lightweight alternative to the ISMS series of scope mounts.The SCT-3006 is designed for the Tikka T3X, but will also fit on the SAKO...