Equipment & Supplies

Lee Precision 3-Hole Extra Turrets

Lee Aluminum 3-Hole Turret for quick change turret for the 3-Hole Turret Press and Pro 1000. This 3 hole turret will not work in our 4 Hole Turret Press or 4 Hole Classic Turret Press.

Lee Precision 7x57 Mauser Quick Trim Die

Ideal for use with the Lee Deluxe Quick Trim Case Trimmer or Value Trim Case Trimmer the Quick Trim Rifle Die is threaded 7/8"-14 to work in all reloader presses that accept standard reloading dies.

Lee Bullet Mold 50 Cal 320 Gr Real/490 RB

Lee Double Cavity Combo Mold produces one 50 Cal. diameter 320 grain R.E.A.L bullet and one .490 diameter round Ball.

Lee Precision Bulge Buster Kit

Lee Bulge Buster Kit and the appropriate Lee Factory Crimp Die assures your mixed brass is bulge free. This push through die adapter will quickly remove the annoying bulge rings that shell holder constrained dies simply can't reach. The Bulge Buster Kit...

Lee Bullet Mold 00 Buck Shot Mold No Handles

This precision molded mold produces 18 linked pellets per cast. No need to individually count pellets simply snip three strands into your 12 gauge shell. Each cast produces enough pellets to load two 12 Gauge shotshells.Wooden handles shown are NOT...

Lee Precision 300 WSM Quick Trim Die

Ideal for use with the Lee Deluxe Quick Trim Case Trimmer or Value Trim Case Trimmer the Quick Trim Rifle Die is threaded 7/8"-14 to work in all reloader presses that accept standard reloading dies.

Lee Precision 6MM Creedmoor PaceSetter Full Length 3 Die Set

Lee 6mm Creedmoor PaceSetter 3-Die Set includes a Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data

Lee Bullet Mold 54 Cal 410 Gr Improved Minie

Lee Single Cavity Mold produces a .533 diameter 410 grain Minie bullet.

Lee Bullet Mold 50 Cal 360 Gr Improved Minie

Lee Single Cavity Mold produces a .500 diameter, .940 length, 360 grain Minie bullet.

Lee Bullet Mold 50 Cal 354 Gr Modern Minie

  Lee Single Cavity Mold produces a .500 diameter 354 grain Minie bullet.

Lee Precision Large 8-32 Threaded Cutter W/Lock Stud

  This tool has a 8-32 threaded pin on one side that would screw into other manufacturer's case prep stations. The other end allows you to screw in our Case Length Gauge. Also includes the Lock Stud for use with the Shell Holders,...

Lee Quick Change Drum Set

Features four precision molded nylon drums: (2) small drums for charging 25 ACP to 223 Remington (2) large drums for charging the 223 Remington to Large Magnums. Also include an insert to allow reduced capacity charging similar to smaller drum...

Lee 2-Cavity Bullet Mold (.225 Diameter) 55Gr RF

Lee Double Cavity Mold produces a gas checked .225 diameter 55 grain round with flat bullet suitable for .22 cal cartridges. Handles included.

Lee Precision 223 WSSM PaceSetter Full Length Two Die Set

Lee 223 WSSM Limited Production 2-Die Set includes a Full Length Sizing Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data  

Lee 2-Cavity Bullet Mold (.457 Diameter) Round Ball

Lee Precision Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds...

Lee Precision 300 AAC Case Length Gauge & Shell Holder

Lee Case Length Gauges are a precise and easy way to trim brass cases to length and square the case mouth. Used with the Lee Cutter and Lock Stud or Zip Trim.

Lee Precision 300 Win Mag Quick Trim Die

Ideal for use with the Lee Deluxe Quick Trim Case Trimmer or Value Trim Case Trimmer the Quick Trim Rifle Die is threaded 7/8"-14 to work in all reloader presses that accept standard reloading dies.

Lee Precision 204 Ruger Quick Trim Die

Ideal for use with the Lee Deluxe Quick Trim Case Trimmer or Value Trim Case Trimmer the Quick Trim Rifle Die is threaded 7/8"-14 to work in all reloader presses that accept standard reloading dies.

Lee Precision Deluxe Quick Trim Case Trimmer

Deluxe Quick Trim Case Trimmer With the addition of inexpensive cartridge specific Quick Trim Die body (rifle or pistol), you will be able to quickly and precisely trim your brass to the correct length with press-mounted convenience. The...

Lee Precision Pro Auto-Disk Powder Measure

The Lee Pro Auto-Disk powder measure is perfect for the high volume reloader utilizing a progressive reloading press. It features an Elastomer wiper and teflon coated metal casing which makes it silky smooth to operate. The innovative design will not cut...

Lee Precision 300 WBY Mag Quick Trim Die

Ideal for use with the Lee Deluxe Quick Trim Case Trimmer or Value Trim Case Trimmer the Quick Trim Rifle Die is threaded 7/8"-14 to work in all reloader presses that accept standard reloading dies.

Lee Precision 300 H&H Magnum Quick Trim Die

Ideal for use with the Lee Deluxe Quick Trim Case Trimmer or Value Trim Case Trimmer the Quick Trim Rifle Die is threaded 7/8"-14 to work in all reloader presses that accept standard reloading dies.

Lee Precision 35 Rem Quick Trim Die

Ideal for use with the Lee Deluxe Quick Trim Case Trimmer or Value Trim Case Trimmer the Quick Trim Rifle Die is threaded 7/8"-14 to work in all reloader presses that accept standard reloading dies.

Lee Precision Large Case Trimmer Cutter W/Lock Stud

Lee's Simple, effective, and inexpensive solution to case trimming! the case cutter and locking stud combo makes trimming easy, without requiring lots of bench space. simply screw the caliber specific combination pilot and length gauge into the cutter,...

Lee Precision 375 H&H Quick Trim Die

Ideal for use with the Lee Deluxe Quick Trim Case Trimmer or Value Trim Case Trimmer the Quick Trim Rifle Die is threaded 7/8"-14 to work in all reloader presses that accept standard reloading dies.

Lee Precision 270 WSM Quick Trim Die

Ideal for use with the Lee Deluxe Quick Trim Case Trimmer or Value Trim Case Trimmer the Quick Trim Rifle Die is threaded 7/8"-14 to work in all reloader presses that accept standard reloading dies.

Lee Precision 338 Win Mag Quick Trim Die

Ideal for use with the Lee Deluxe Quick Trim Case Trimmer or Value Trim Case Trimmer the Quick Trim Rifle Die is threaded 7/8"-14 to work in all reloader presses that accept standard reloading dies.

Lee Precision 243 WSSM Case Length Gauge & Shell Holder

Lee Case Length Gauges are a precise and easy way to trim brass cases to length and square the case mouth. Gauge and shell holder requires a Lee Cutter and Lock Stud to function.Specifications and Features:Hardened Steel GaugeThreaded shell holder locks...

Lee 2-Cavity Bullet Mold .285 Dia 130 Gr R

Lee 2-Cavity Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds...

Lee 2-Cavity Bullet Mold .452 228gr RN Bullet Mold

Lee Precision Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds...

Lee Precision 8x57 Mauser Quick Trim Die

Ideal for use with the Lee Deluxe Quick Trim Case Trimmer or Value Trim Case Trimmer the Quick Trim Rifle Die is threaded 7/8"-14 to work in all reloader presses that accept standard reloading dies.

Lee Precision 460 S&W Carbide Die Set

Lee 460 S&W Pistol 3-Die Set includes Carbide Full Length Sizing Die, Bullet Seating Die, Powder Thru Expanding Die, Powder Dipper and Instructions/Load Data.

Lee Precision 7.62x39 Quick Trim Die

Ideal for use with the Lee Deluxe Quick Trim Case Trimmer or Value Trim Case Trimmer the Quick Trim Rifle Die is threaded 7/8"-14 to work in all reloader presses that accept standard reloading dies.

Lee Precision 7MM/08 Rem Quick Trim Die

Ideal for use with the Lee Deluxe Quick Trim Case Trimmer or Value Trim Case Trimmer the Quick Trim Rifle Die is threaded 7/8"-14 to work in all reloader presses that accept standard reloading dies.

Lee Precision 7.62x54R Quick Trim Die

Ideal for use with the Lee Deluxe Quick Trim Case Trimmer or Value Trim Case Trimmer the Quick Trim Rifle Die is threaded 7/8"-14 to work in all reloader presses that accept standard reloading dies.

Lee Precision 222 Rem Quick Trim Die

Ideal for use with the Lee Deluxe Quick Trim Case Trimmer or Value Trim Case Trimmer the Quick Trim Rifle Die is threaded 7/8"-14 to work in all reloader presses that accept standard reloading dies.

Lee Precision 6.5 x 55 Swed Quick Trim Die

Ideal for use with the Lee Deluxe Quick Trim Case Trimmer or Value Trim Case Trimmer the Quick Trim Rifle Die is threaded 7/8"-14 to work in all reloading presses that accept standard reloading dies.

Lee Precision 25/06 Rem Quick Trim Die

Ideal for use with the Lee Deluxe Quick Trim Case Trimmer or Value Trim Case Trimmer the Quick Trim Rifle Die is threaded 7/8"-14 to work in all reloader presses that accept standard reloading dies.

Lee Precision 300 WSM Factory Crimp Die

Lee 300 WSM Factory Crimp Die crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a...

Lee 2-Cavity Bullet Mold (379 Diameter) 250 Grain RF

Lee Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and...

Lee Precision 7mm WSM Case Length Gauge & Shell Holder

Lee Case Length Gauges are a precise and easy way to trim brass cases to length and square the case mouth. Gauge and shell holder requires a Lee Cutter and Lock Stud to function.Specifications and Features:Hardened Steel GaugeThreaded shell holder locks...

Lee Precision 357 Win Case Length Gauge & Shell Holder

Lee Case Length Gauges are a precise and easy way to trim brass cases to length and square the case mouth. Gauge and shell holder requires a Lee Cutter and Lock Stud to function.Specifications and Features:Hardened Steel GaugeThreaded shell holder locks...

Lee .429 Dia 200GR RF Double Cavity Mold

Lee Double Cavity Mold produces a .429 diameter 200 grain round with flat bullet suitable for cartridges like 44 Spec, 44/40, etc.

Lee Precision 22/250 Rem Quick Trim Die

22/250 QUICK TRIM DIE

Lee Shotgun Slug Mold 12 Gauge 1 oz.

Lee 1oz Slug Mold features the exclusive drive key which positively rotates the slug in rifled shotgun barrels. Includes sprue plate, handles and instruction with suggested loads.   1 OZ      diameter = .681 inches    ...

Lee Cutter with Ball Grip

Lee Cutter and Ball Grip makes case prep easier and more comfortable. Used with the Zip Trim

Lee .324 Dia 175gr 1R Double Cavity Mold

Lee Double Cavity Mold produces a .324 diameter 175 grain round nose bullet suitable for cartridges like 8MM.

Lee Precision Auto Prime Shell Holder #14

Lee #14 Priming Tool shell holder used in Lee hand priming tools. For the 38/40, 44/40 and similar cases. 

Lee Steel Base Block

The Lee Steel Bench Block is designed to work in conjunction with the Patented Lee Bench Plate system, featured on the the quick change Lee Bench Plate and Lee Reloading Stand. Constructed of thick steel, with a durable black powder-coated finish...

Lee Classic Loader 30-06 Sprg

Lee Loader is a complete reloading system, kit includes everything needed to reload 30/06, except a rubber mallet. The rubber mallet would need to be purchased separately.  Please note: The Classic Lee Loader neck sizes only. This is not...

Lee Precision Universal Case Feeder

Lee Universal Case Feeder automates the case feeding operation on the Auto Breech Lock Pro, Pro 1000 and Load Master presses. Ships with four clear case feed tubes, Case Slider Block, Riser Block for taller cartridges, and Small and Large Feed Plate...

Lee Precision 7x64 Brenneke Case Gauge & Shell Holder

Lee 7X64 BRENNEKE Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim.